The Subaru Vivio was a kei car by Subaru, introduced in 1992. With a 658 cc engine and only 70 0 kg weight, it was one of the lightest kei cars. The name “Vivio” is a reference to the engine’s displacement of 660 written in Roman numerals (VI,VI,O), and also inspired by the word “vivid”. It replaced the Rex that was introduced in the 1970s, and was itself superseded by the Subaru Pleo.Despite its small size, it was roomy enough for its relatively tall profile and large windows. It took part in 1993 round of the Safari Rally and was able to finish in 12th position. It was available as a hatchback and a targa body style.
Frequently Asked Questions
How do I adjust the headlights in my Subaru Vivio?
To adjust the headlights in your Subaru Vivio, park the vehicle on a level surface facing a wall or garage door. Measure the distance from the ground to the center of each headlight and mark it on the wall at the same height. Back up the vehicle about 25 feet and turn on the low beam headlights. Adjust the horizontal and vertical aim of the headlights using the adjustment screws located on the back of the headlight assembly. Align the beams so they are centered on the marks on the wall. Properly aligned headlights will ensure optimal visibility and minimize glare for other drivers.
How do I change the oil in my Subaru Vivio?
To change the oil in your Subaru Vivio, locate the oil drain plug underneath the engine and remove it using a socket wrench. Allow the old oil to drain completely before replacing the drain plug. Then, locate the oil filter, unscrew it using an oil filter wrench, and replace it with a new one. Finally, add the recommended amount of new oil to the engine through the oil filler cap.
How do I check the brake fluid level in my Subaru Vivio?
To check the brake fluid level in your Subaru Vivio, locate the brake fluid reservoir under the hood. The reservoir is usually located near the firewall on the driver’s side. The reservoir will have minimum and maximum marks indicating the acceptable range for the fluid level. Ensure the vehicle is on a level surface, remove the reservoir cap, and visually inspect the fluid level. If the level is below the minimum mark, add the recommended brake fluid until it reaches the maximum mark. It is important to use the correct type of brake fluid as specified in your owner’s manual or Subaru Vivio automotive repair manual.
How do I check the transmission fluid level in my Subaru Vivio?
To check the transmission fluid level in your Subaru Vivio, start the engine and allow it to reach normal operating temperature. Locate the transmission dipstick, which is usually labeled and located near the back of the engine bay. With the engine running and the transmission in park or neutral, remove the dipstick and wipe it clean with a lint-free cloth. Reinsert the dipstick fully and then remove it again to check the fluid level. The fluid should be within the designated range on the dipstick. If it is low, add the recommended transmission fluid as specified in your owner’s manual or Subaru Vivio automotive repair manual.
How do I jump-start my Subaru Vivio?
To jump-start your Subaru Vivio, you will need a set of jumper cables and another vehicle with a fully charged battery. Park the vehicles close to each other but do not let them touch. Turn off both vehicles and ensure the ignition is in the off position. Connect one end of the positive (red) jumper cable to the positive terminal of the dead battery and the other end to the positive terminal of the charged battery. Connect one end of the negative (black) jumper cable to the negative terminal of the charged battery and the other end to a metal surface away from the dead battery. Start the vehicle with the charged battery and let it run for a few minutes. Then, try starting your Subaru Vivio. Once it starts, remove the jumper cables in the reverse order of connection.
How do I replace a blown fuse in my Subaru Vivio?
To replace a blown fuse in your Subaru Vivio, locate the fuse box, which is usually located under the dashboard or in the engine compartment. Open the fuse box cover and identify the fuse that corresponds to the malfunctioning circuit. Use a fuse puller or a pair of needle-nose pliers to carefully remove the blown fuse. Replace it with a new fuse of the same amperage rating and ensure it is securely seated in the fuse box. Close the fuse box cover and test the circuit to ensure it is functioning properly.
How do I replace a cabin air filter in my Subaru Vivio?
To replace a cabin air filter in your Subaru Vivio, locate the cabin air filter housing, which is usually located behind the glove compartment or under the dashboard. Open the housing by removing the retaining clips or screws. Take note of the orientation of the old cabin air filter before removing it. Remove the old filter and replace it with a new one of the same size and orientation. Ensure the filter is securely in place, then close the housing and reinstall any retaining clips or screws. Regularly replacing the cabin air filter will help maintain clean and fresh air inside your Subaru Vivio.
How do I replace a headlight bulb in my Subaru Vivio?
To replace a headlight bulb in your Subaru Vivio, open the hood and locate the back of the headlight assembly. Depending on the specific model and year, you may need to remove a cover or access panel to gain access to the bulb. Once you can reach the back of the headlight, twist and remove the bulb socket counterclockwise. Then, carefully remove the old bulb and replace it with a new one. Ensure it is securely seated in the socket, and then reconnect the socket to the headlight assembly. Test the new bulb to ensure it is working properly before closing the hood.
How do I replace a spark plug in my Subaru Vivio?
To replace a spark plug in your Subaru Vivio, first, locate the spark plug wires or ignition coil pack, depending on your specific model. Disconnect the wires from the spark plug by grasping the boot firmly and pulling it straight off. Use a spark plug socket and ratchet to remove the old spark plug by turning it counterclockwise. Inspect the spark plug for any signs of damage or excessive wear. If necessary, adjust the gap
How do I replace a windshield wiper blade in my Subaru Vivio?
To replace a windshield wiper blade in your Subaru Vivio, lift the wiper arm away from the windshield and locate the release tab or button on the wiper blade assembly. Press or slide the tab/button to release the old wiper blade from the wiper arm. Then, position the new wiper blade on the wiper arm, making sure it is securely attached. Lower the wiper arm back onto the windshield and repeat the process for the other wiper blade. Regularly replacing worn or damaged wiper blades will ensure clear visibility during inclement weather.
How do I reset the maintenance light in my Subaru Vivio?
To reset the maintenance light in your Subaru Vivio, turn the ignition switch to the “ON” position without starting the engine. Within five seconds, fully depress and release the accelerator pedal three times. The maintenance light should start flashing, indicating that it has been reset. Turn off the ignition and then start the engine to ensure the maintenance light remains off. Resetting the maintenance light is an important step after performing routine maintenance on your Subaru Vivio.
How often should I replace the air filter in my Subaru Vivio?
It is generally recommended to replace the air filter in your Subaru Vivio every 12,000 to 15,000 miles or as specified in your owner’s manual. However, if you frequently drive in dusty or dirty conditions, it may be necessary to replace the air filter more frequently. A dirty or clogged air filter can restrict airflow to the engine, reducing performance and fuel efficiency. Regularly inspecting and replacing the air filter will help ensure optimal engine performance and prolong the life of your Subaru Vivio.
What is the recommended tire pressure for my Subaru Vivio?
The recommended tire pressure for your Subaru Vivio can usually be found on a sticker located on the driver’s side door jamb or in the owner’s manual. It is important to maintain the proper tire pressure as it affects the vehicle’s handling, fuel efficiency, and tire wear. Use a tire pressure gauge to check the pressure of each tire, and if necessary, add or release air to match the recommended pressure. Regularly monitoring and maintaining the correct tire pressure will help ensure optimal performance and safety.
What type of coolant should I use in my Subaru Vivio?
You should use a coolant that is compatible with your Subaru Vivio’s specifications, such as a long-life ethylene glycol-based coolant. This type of coolant provides excellent heat transfer and corrosion protection. Be sure to check your owner’s manual or consult a Subaru Vivio automotive repair manual for the exact coolant specifications for your specific model and year.
Subaru Vivio Related Models