The Bedford CF was range of full-size panel vans produced by Bedford. The van was introduced in 1969 to replace the older CA model, and was sized to compete directly with the Ford Transit, which had entered production 4 years earlier.Vauxhall/Bedford was a General Motors subsidiary, and outside the United Kingdom and Ireland the CF was sold through Opel dealers as the Opel Bedford Blitz from 1973 on.The CF was notable for being the last solely Vauxhall-engineered vehicle when it was discontinued in 1987 (the last Vauxhall passenger car had been the HC Viva which had ceased production in 1979); since all Vauxhall models by that point had switched to being based on Opel platforms. The Bedford brand continued on certain badge engineered light van designs from Isuzu and Suzuki, before being retired in 1991.
Frequently Asked Questions
How do I adjust the idle speed in my Bedford CF?
The idle speed in a Bedford CF can be adjusted by turning the idle speed screw on the throttle body. The recommended idle speed can be found in the owner’s manual. It is important to make small adjustments and test the vehicle before making further adjustments.
How do I adjust the timing in my Bedford CF?
The timing in a Bedford CF can be adjusted by rotating the distributor to advance or retard the spark timing. The recommended timing can be found in the owner’s manual. It is important to use a timing light to accurately adjust the timing.
How do I check the transmission fluid level in my Bedford CF?
To check the transmission fluid level in a Bedford CF, the engine must be running and the transmission must be in park or neutral. The dipstick is located near the back of the engine compartment and should be marked with a “transmission” label. The fluid level should be between the “full” and “add” marks on the dipstick.
How do I replace the alternator in my Bedford CF?
To replace the alternator in a Bedford CF, disconnect the battery, remove the drive belt, and remove the electrical connections and mounting bolts from the alternator. Install the new alternator and reassemble the electrical connections and drive belt.
How do I replace the brake pads in my Bedford CF?
To replace the brake pads in a Bedford CF, remove the wheel, remove the caliper bolts, and use a C-clamp to compress the caliper piston. Install the new brake pads and reassemble the caliper. It is important to check the brake rotors for wear and replace them if necessary.
How do I replace the clutch in my Bedford CF?
To replace the clutch in a Bedford CF, remove the transmission, remove the clutch plate and pressure plate, and install the new clutch components. It is important to inspect and replace the pilot bearing and release bearing as necessary.
How do I replace the fuel filter in my Bedford CF?
To replace the fuel filter in a Bedford CF, relieve the fuel system pressure, disconnect the fuel lines from the filter, and remove the mounting bolts. Install the new filter and reconnect the fuel lines. It is important to use the correct type of fuel filter recommended by the manufacturer.
How do I replace the radiator in my Bedford CF?
To replace the radiator in a Bedford CF, drain the coolant from the radiator, remove the radiator hoses and mounting bolts, and remove the radiator from the vehicle. Install the new radiator and reconnect the hoses and mounting bolts. Refill the radiator with coolant and check for leaks.
How do I replace the spark plugs in my Bedford CF?
To replace the spark plugs in a Bedford CF, remove the spark plug wires from each plug, use a spark plug socket to remove the old plugs, and install the new plugs using a torque wrench to ensure proper tightness. It is important to use the correct type of spark plug recommended by the manufacturer.
How do I replace the thermostat in my Bedford CF?
To replace the thermostat in a Bedford CF, drain the coolant from the radiator, remove the thermostat housing, and replace the thermostat and gasket. Refill the radiator with coolant and check for leaks.
How do I replace the water pump in my Bedford CF?
To replace the water pump in a Bedford CF, drain the coolant from the radiator, remove the drive belt, and remove the water pump bolts. Install the new water pump and reassemble the drive belt and coolant system.
How do I troubleshoot a starting problem in my Bedford CF?
To troubleshoot a starting problem in a Bedford CF, check the battery connections, listen for clicking sounds when turning the key, and check the starter motor and solenoid for proper operation. It may be necessary to perform a voltage drop test to determine the cause of the starting problem.
How often should I change the air filter in my Bedford CF?
The air filter in a Bedford CF should be changed every 12,000 miles or every 12 months, whichever comes first. A dirty air filter can reduce engine performance and fuel efficiency, so it is important to replace it regularly.
What is the proper tire pressure for a Bedford CF?
The proper tire pressure for a Bedford CF varies depending on the tire size and vehicle load. The recommended tire pressure can be found in the owner’s manual or on the tire placard located on the driver’s side door jamb.
What is the recommended oil type for a Bedford CF?
The recommended oil type for a Bedford CF is 15W-40. It is important to use a high quality oil to ensure proper engine lubrication and performance. Regular oil changes should be performed according to the manufacturer’s recommendations.
Bedford CF Related Models