The Dodge Shadow and Plymouth Sundance, also called Chrysler ES, are compact 3-door and 5-door hatchbacks that were introduced for the 1987 model year. For 1991, a 2-door convertible variant was added to the Shadow lineup; but not the Sundance lineup. The first vehicle rolled out of Sterling Heights Assembly on August 25, 1986. At the time, the Shadow/Sundance was the lowest-priced car on the market with a standard driver’s side airbag, which had been made standard on all US-market domestic Chrysler Corporation cars in 1990. Production ended on March 9, 1994, with the Shadow/Sundance being replaced by the Chrysler Neon.
Frequently Asked Questions
How do I change the air filter on a Chrysler ES?
To change the air filter on a Chrysler ES, first locate the air filter housing. Open the housing and remove the old filter. Replace it with a new filter, making sure it is properly seated and secured in the housing. Close the housing and ensure it is properly sealed.
How do I change the oil on a Chrysler ES?
To change the oil on a Chrysler ES, first locate the oil pan underneath the engine. Remove the drain plug and drain the old oil into a container. Replace the drain plug and add new oil to the engine, being careful not to overfill.
How do I check the transmission fluid on a Chrysler ES?
To check the transmission fluid on a Chrysler ES, first locate the transmission dipstick. Remove it and wipe it clean with a cloth. Reinsert the dipstick and remove it again to check the fluid level. If the level is low, add the recommended type of fluid until it reaches the proper level.
How do I replace a headlight bulb on a Chrysler ES?
To replace a headlight bulb on a Chrysler ES, first locate the headlight assembly. Disconnect the electrical connector and remove the retaining clip or screws. Carefully remove the old bulb and replace it with a new one, then reattach the retaining clip or screws and reconnect the electrical connector.
How do I replace the battery on a Chrysler ES?
To replace the battery on a Chrysler ES, first locate the battery and disconnect the negative cable. Remove the battery hold-down clamp and lift out the old battery. Replace it with a new battery, making sure it is properly seated and secured. Reattach the hold-down clamp and reconnect the negative cable.
How do I replace the brake pads on a Chrysler ES?
To replace the brake pads on a Chrysler ES, first remove the wheel and locate the brake caliper. Use a C-clamp or brake piston tool to compress the caliper piston, then remove the old brake pads and replace them with new ones. Reattach the caliper and wheel, then repeat the process for the other wheels.
How do I replace the serpentine belt on a Chrysler ES?
To replace the serpentine belt on a Chrysler ES, first locate the belt tensioner and use a wrench or socket to release the tension. Remove the old belt and replace it with a new one, following the routing diagram located on the engine. Release the tensioner and ensure the belt is properly seated.
How do I replace the spark plugs on a Chrysler ES?
To replace the spark plugs on a Chrysler ES, first locate the spark plug wires and disconnect them. Use a spark plug socket to remove the old plugs and replace them with new ones, making sure they are properly gapped. Reconnect the spark plug wires and ensure they are properly seated.
What is causing my Chrysler ES to have poor fuel economy?
There are several possible causes of poor fuel economy in a Chrysler ES, including a clogged air filter, underinflated tires, a malfunctioning oxygen sensor, or a problem with the fuel system. It is important to identify the specific cause of the problem and address it promptly to improve fuel efficiency.
What is causing my Chrysler ES to overheat?
There are several possible causes of overheating in a Chrysler ES, including a malfunctioning thermostat, a faulty radiator, a leaking coolant hose, or a damaged water pump. It is important to identify the specific cause of the problem and address it promptly to avoid further damage to the engine.
What is causing my Chrysler ES to vibrate while driving?
There are many possible causes of vibration in a Chrysler ES, including worn-out suspension components, unbalanced wheels, or a damaged driveshaft. It is important to have the vehicle inspected by a qualified mechanic to identify the specific cause of the problem and address it promptly to avoid further damage to the vehicle.
What is the recommended tire pressure for a Chrysler ES?
The recommended tire pressure for a Chrysler ES varies depending on the specific model and year. Consult the owner’s manual or the tire information label located on the driver’s side door jamb for the proper tire pressure. It is important to maintain the correct tire pressure to ensure proper handling, fuel efficiency, and tire longevity.
What type of oil should I use in my Chrysler ES?
The recommended oil type for a Chrysler ES is 5W-20 or 5W-30. It is important to use high-quality oil that meets the manufacturer’s specifications to ensure proper engine performance and longevity. Consult the owner’s manual or a certified mechanic for specific recommendations.
Why is my Chrysler ES battery light on?
The battery light on a Chrysler ES may indicate a problem with the alternator, battery, or charging system. It is important to have the vehicle inspected by a qualified mechanic to identify the specific cause of the problem and address it promptly to avoid further damage to the vehicle.
Why is my Chrysler ES making a strange noise?
There are many different reasons why a Chrysler ES may be making a strange noise, including a worn-out belt, a damaged engine component, or a problem with the exhaust system. It is important to have the vehicle inspected by a qualified mechanic to identify the specific cause of the noise and address it promptly.
Chrysler ES Related Models