The Chevrolet Tracker, formerly the Geo Tracker, is a mini SUV produced for Chevrolet and Geo by CAMI Automotive in Ingersoll, Ontario. Although appearing as a compact SUV, the Tracker was actually certified as a Light truck due to its off-road capabilities. It was initially introduced in late 1988 as a 1989 model. The Tracker was originally powered by Suzuki’s 1.6L SOHC 4-cylinder engine producing 80 hp (60 kW). The trim levels in 1989 were base convertible, base 2-door hardtop and LSi hardtop. According to a 1995 report by the Insurance Institute for Highway Safety, the 1991 1993 Two Wheel drive Geo Tracker had 21 driver fatalities for 66,210 registered vehicles, the highest incidence reported, at 3.2 per 10,000 vehicles.
Frequently Asked Questions
How do I change the oil in my Ford Contour?
To change the oil in your Ford Contour, first drain the oil by removing the drain plug at the bottom of the oil pan. Remove the oil filter and replace it with a new one. Refill the engine with the recommended amount of new oil, and check the oil level with the dipstick to ensure it is at the proper level.
How do I flush the radiator in my Ford Contour?
To flush the radiator in your Ford Contour, first drain the old coolant from the system. Refill the radiator with a radiator flush solution and run the engine for the recommended amount of time. Drain the flush solution and refill the radiator with fresh coolant.
How do I replace the air filter in my Ford Contour?
To replace the air filter in your Ford Contour, locate the air filter housing under the hood. Remove the housing cover and the old filter. Install the new filter and reassemble the housing cover. Be sure to properly dispose of the old filter according to local regulations.
How do I replace the alternator in my Ford Contour?
To replace the alternator in your Ford Contour, first disconnect the battery and remove the serpentine belt. Remove the electrical connections and mounting bolts from the alternator, and remove it from the vehicle. Install the new alternator and reassemble the electrical connections and mounting bolts.
How do I replace the brake pads on my Ford Contour?
To replace the brake pads on your Ford Contour, first remove the wheel and caliper from the brake rotor. Compress the caliper piston and remove the old brake pads. Install the new brake pads and reassemble the caliper and wheel. Repeat the process on the other side of the vehicle.
How do I replace the fuel filter in my Ford Contour?
To replace the fuel filter in your Ford Contour, locate the filter under the vehicle near the fuel tank. Release the fuel pressure and disconnect the fuel lines from the filter. Remove the old filter and install the new one. Reconnect the fuel lines and start the engine to check for proper operation.
How do I replace the headlight bulbs in my Ford Contour?
To replace the headlight bulbs in your Ford Contour, first remove the headlight assembly from the vehicle. Remove the old bulb from the assembly and install the new one. Reassemble the headlight assembly and reinstall it on the vehicle. Repeat the process on the other side of the vehicle.
How do I replace the serpentine belt on my Ford Contour?
To replace the serpentine belt on your Ford Contour, first locate the belt routing diagram under the hood. Use a belt tensioner tool to release tension on the old belt, and remove it from the pulleys. Install the new belt according to the diagram, and use the tensioner tool to tighten the belt to the proper tension.
How do I replace the spark plugs in my Ford Contour?
To replace the spark plugs in your Ford Contour, first locate the spark plug wires and remove them from the spark plugs. Use a spark plug socket to remove the old plugs and install the new ones. Reinstall the spark plug wires in the correct order.
How do I replace the thermostat in my Ford Contour?
To replace the thermostat in your Ford Contour, first locate the thermostat housing. Remove the housing cover and the old thermostat. Install the new thermostat and gasket, and reassemble the housing cover. Be sure to properly dispose of the old thermostat according to local regulations.
What should I do if my Ford Contour won’t start?
If your Ford Contour won’t start, check the battery connections and charge the battery if necessary. Inspect the starter motor and ignition system for any visible damage or wear. If the issue persists, it may be necessary to have the vehicle diagnosed by a professional mechanic.
Why is my Ford Contour’s air conditioning not working?
A malfunctioning air conditioning system in your Ford Contour can be caused by a number of issues, such as low refrigerant, a faulty compressor, or a clogged condenser. Check the refrigerant level and inspect the system components for any visible damage or wear. If the issue persists, it may be necessary to seek professional assistance.
Why is my Ford Contour’s check engine light on?
The check engine light in your Ford Contour can be triggered by a number of issues, such as a faulty oxygen sensor, a loose gas cap, or a malfunctioning catalytic converter. Use an OBD-II scanner to retrieve the trouble codes and diagnose the issue. If the issue persists, it may be necessary to seek professional assistance.
Why is my Ford Contour’s engine overheating?
An overheating engine in your Ford Contour can be caused by a number of issues, such as a malfunctioning thermostat, a coolant leak, a faulty water pump, or a clogged radiator. Check for any visible leaks or damage, and inspect the cooling system components for proper operation. If the issue persists, it may be necessary to seek professional assistance.
Why is my Ford Contour’s transmission slipping?
A slipping transmission in your Ford Contour can be caused by a number of issues, such as low transmission fluid, a worn clutch or torque converter, or a malfunctioning solenoid. Check the transmission fluid level and condition, and inspect the transmission components for any visible damage or wear.
