BMW 840 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
BMW 840
The BMW 8 Series (chassis code: E31) is a Grand Tourer manufactured by BMW from 1989 to 1999 powered by either a V8 or V12 engine. The 840Ci model is produced with two different engine packages. The first used the 4 liter M60B40 with 286 PS and was produced from 1993 thru 1995. The second engine used 4.4 liter M62B44 engine, which had better fuel economy. It was manufactured as 5-speed automatic, but 6-speed manual transmissions were available for European market. The 840Ci stayed in production until May, 1999.BMW 840 FAQ's
How can I replace the headlight bulb on a BMW 840?
To replace the headlight bulb on a BMW 840, you need to first remove the headlight assembly. This can be done by opening the hood and locating the retaining clips that hold the assembly in place. Once the assembly is removed, you can then replace the bulb by twisting it counterclockwise and pulling it out of the socket.
How do I check the transmission fluid level on a BMW 840?
To check the transmission fluid level on a BMW 840, you need to first start the engine and let it run for a few minutes. Then, locate the transmission dipstick and remove it from the transmission. Wipe the dipstick clean, reinsert it into the transmission, and then remove it again to check the fluid level.
How do I replace the battery on a BMW 840?
To replace the battery on a BMW 840, you need to first remove the negative cable from the old battery, followed by the positive cable. Then, remove the battery hold-down clamp and lift the old battery out of the vehicle. Install the new battery in the reverse order and make sure to properly tighten the hold-down clamp.
How do I replace the brake pads on a BMW 840?
To replace the brake pads on a BMW 840, you need to first remove the wheel and then remove the brake caliper. Once the caliper is removed, you can then remove the old brake pads and replace them with new ones. Make sure to properly torque the caliper bolts and reattach the wheel.
How do I replace the fuel filter on a BMW 840?
To replace the fuel filter on a BMW 840, you need to first locate the filter under the vehicle. Then, use a wrench to loosen the fuel lines and remove the mounting bracket. Once the filter is removed, install the new filter and reattach the fuel lines and bracket.
How do I replace the serpentine belt on a BMW 840?
To replace the serpentine belt on a BMW 840, you need to first locate the tensioner pulley and use a wrench to release the tension on the belt. Then, remove the old belt and install the new one, following the belt routing diagram under the hood. Finally, use the wrench to tighten the tensioner pulley and ensure proper belt tension.
How do I reset the oil change indicator on a BMW 840?
To reset the oil change indicator on a BMW 840, you need to first turn the ignition to the "on" position without starting the engine. Then, press and hold the odometer reset button until the indicator light starts flashing. Release the button and press it again until the display shows "SIA". Press and hold the button again until the display shows "Reset". Release the button and the oil change indicator should be reset.
How do I reset the service interval indicator on a BMW 840?
To reset the service interval indicator on a BMW 840, you need to first turn the ignition to the "on" position without starting the engine. Then, press and hold the odometer reset button until the indicator light starts flashing. Release the button and press it again until the display shows "SI". Press and hold the button again until the display shows "Reset". Release the button and the service interval indicator should be reset.
What is the recommended coolant for a BMW 840?
It is recommended to use BMW Coolant or a compatible brand for a BMW 840. This type of coolant is specifically formulated for BMW engines and helps to prevent corrosion, overheating, and freezing.
What is the recommended interval for changing the brake fluid on a BMW 840?
It is recommended to change the brake fluid on a BMW 840 every 2 years or 24,000 miles, whichever comes first. This helps to ensure that the brake system is functioning properly and can prevent brake failure.
What is the recommended interval for changing the engine air filter on a BMW 840?
It is recommended to change the engine air filter on a BMW 840 every 30,000 miles. This helps to ensure that the engine is receiving a proper amount of air, which can improve fuel efficiency and engine performance.
What is the recommended interval for changing the spark plugs on a BMW 840?
It is recommended to change the spark plugs on a BMW 840 every 60,000 to 100,000 miles. This helps to ensure that the engine is running efficiently and can prevent misfires and other engine problems.
What is the recommended interval for changing the transmission fluid on a BMW 840?
It is recommended to change the transmission fluid on a BMW 840 every 60,000 to 100,000 miles. This helps to ensure that the transmission is properly lubricated and can prolong its lifespan.
What is the recommended tire pressure for a BMW 840?
The recommended tire pressure for a BMW 840 is 32 psi for the front tires and 36 psi for the rear tires. Proper tire pressure ensures optimal handling, fuel efficiency, and tire wear.
What type of engine oil should I use for a BMW 840?
It is recommended to use a 5W-30 synthetic oil for a BMW 840. This type of oil ensures that the engine is properly lubricated and helps to improve fuel efficiency. Additionally, synthetic oil can provide better protection against engine wear and tear.
BMW 840 Workshop Manual
-
- BMW 840 1995 Workshop Manual
- (1,597 Pages)
- (Free)
Related Models