Chrysler Imperial Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Chrysler Imperial
The Chrysler Imperial, officially introduced in 1926, was the company's top of the range vehicle for much of its history. Models were produced with the Chrysler name until 1954, and again from 1990 to 1993. Initially, Chrysler offered a variety of body styles: a two/four-passenger roadster (four passenger if car had the rumble seat[7]), a four-seat coupé, five-passenger sedan and phaeton, and a seven-passenger top-of-the-line limousine. The limo had a glass partition. A Chrysler Imperial concept car was presented at the 2006 North American International Auto Show.Chrysler Imperial FAQ's
How do I bleed the brakes on a Chrysler Imperial?
To bleed the brakes on a Chrysler Imperial, first locate the brake bleeder valve on each wheel cylinder. Then, attach a clear tube to the valve and submerge the other end in a container of brake fluid. Have an assistant press the brake pedal while you open and close the valve, repeating the process until no air bubbles are present in the fluid. Repeat the process for each wheel cylinder.
How do I change a air filter in a Chrysler Imperial?
To change the air filter in a Chrysler Imperial, first locate the air filter housing. Then, release any clips or screws holding the housing cover in place, and remove the cover. Remove the old air filter and replace it with a new one, ensuring proper fit. Reattach the housing cover and any clips or screws.
How do I change the oil in a Chrysler Imperial?
To change the oil in a Chrysler Imperial, first warm up the engine for a few minutes and turn it off. Then locate the oil drain plug and remove it to drain the old oil into a pan. After draining, replace the drain plug and refill the engine with the recommended amount of new oil, checking the dipstick to ensure proper level.
How do I change the spark plugs in a Chrysler Imperial?
To change the spark plugs in a Chrysler Imperial, first locate the spark plug wires and remove them from the plugs. Then, use a spark plug socket and ratchet to remove the old spark plugs. Replace them with new ones, ensuring proper gap and torque. Finally, reattach the spark plug wires.
How do I flush the radiator in a Chrysler Imperial?
To flush the radiator in a Chrysler Imperial, first drain the old coolant from the radiator and engine block. Then, connect a flushing T-hose to the heater hose and connect a garden hose to the flushing T-hose. Turn on the water and run the engine until the water coming out of the T-hose is clear. Finally, drain the water and refill with new coolant.
How do I replace a fuel filter in a Chrysler Imperial?
To replace a fuel filter in a Chrysler Imperial, first locate the fuel filter and remove any retaining clips or bolts. Then, carefully remove the old fuel filter and replace it with a new one, ensuring proper fit. Finally, reattach any retaining clips or bolts.
How do I replace a headlight bulb in a Chrysler Imperial?
To replace a headlight bulb in a Chrysler Imperial, first locate the headlight assembly. Then, remove the retaining clip or screws holding the assembly in place and carefully pull it forward. Remove the old bulb and replace it with a new one, ensuring proper fit. Reattach the headlight assembly and any retaining clip or screws.
How do I replace a power steering pump in a Chrysler Imperial?
To replace a power steering pump in a Chrysler Imperial, first remove the drive belt and any electrical connections or hoses attached to the pump. Then, remove any mounting bolts and carefully remove the old pump from the vehicle. Replace it with a new pump, ensuring proper fit and torque. Finally, reattach the drive belt, electrical connections, and hoses.
How do I replace a serpentine belt in a Chrysler Imperial?
To replace a serpentine belt in a Chrysler Imperial, first locate the belt tensioner and use a wrench to release tension on the belt. Then, carefully remove the old belt and replace it with a new one, ensuring proper fit. Finally, use the wrench to reapply tension to the belt.
How do I replace a thermostat in a Chrysler Imperial?
To replace a thermostat in a Chrysler Imperial, first locate the thermostat housing and remove any bolts or clips holding it in place. Then, carefully remove the old thermostat and replace it with a new one, ensuring proper fit. Finally, reattach the thermostat housing and any bolts or clips.
How do I replace a transmission filter in a Chrysler Imperial?
To replace a transmission filter in a Chrysler Imperial, first locate the transmission pan and remove any bolts holding it in place. Then, carefully remove the old filter and replace it with a new one, ensuring proper fit. Finally, reattach the transmission pan and any bolts.
How do I replace the alternator in a Chrysler Imperial?
To replace the alternator in a Chrysler Imperial, first disconnect the battery cables and remove the drive belt. Then, disconnect the electrical connections and mounting bolts for the alternator and remove it from the vehicle. Replace it with a new alternator, ensuring proper fit and torque. Finally, reconnect the electrical connections and drive belt.
How do I replace the battery in a Chrysler Imperial?
To replace the battery in a Chrysler Imperial, first locate the battery and remove the negative cable from the terminal. Then, remove the positive cable and any securing brackets, and lift the battery out of the vehicle. Replace with a new battery, securing it in place with brackets and reconnecting the positive and negative cables.
How do I replace the brake pads on a Chrysler Imperial?
To replace the brake pads on a Chrysler Imperial, first remove the wheel and caliper assembly. Then remove the old brake pads and replace them with new ones, ensuring proper fit. Finally, reattach the caliper assembly and wheel, and repeat the process for the other side.
How do I troubleshoot a starting problem in a Chrysler Imperial?
To troubleshoot a starting problem in a Chrysler Imperial, first check the battery terminals and connections for corrosion or looseness. Then, check the starter solenoid and starter motor for proper operation. Finally, check the ignition switch and wiring for any faults.
Chrysler Imperial Manuals Index
Chrysler Imperial on Amazon
Chrysler Imperial Workshop Manual
-
- Chrysler Imperial 1956 Workshop Manual
- (476 Pages)
- (Free)
-
- Chrysler Imperial 1957 Workshop Manual
- (458 Pages)
- (Free)
-
- Chrysler Imperial 1958 Workshop Manual
- (504 Pages)
- (Free)
-
- Chrysler Imperial 1959 Worksho Manual Supplement
- (151 Pages)
- (Free)
-
- Chrysler Imperial 1962 Workshop Manual
- (621 Pages)
- (Free)
-
- Chrysler Imperial 1963 Workshop Manual
- (557 Pages)
- (Free)
-
- Chrysler Imperial 1964 Workshop Manual
- (627 Pages)
- (Free)
-
- Chrysler Imperial 1965 Workshop Manual
- (585 Pages)
- (Free)
-
- Chrysler Imperial 1966 Workshop Manual
- (624 Pages)
- (Free)
-
- Chrysler Imperial 1970 Workshop Manual
- (700 Pages)
- (Free)
-
- Chrysler Imperial 1971 Workshop Manual
- (302 Pages)
- (Free)
-
- Chrysler Imperial 1972 Workshop Manual
- (984 Pages)
- (Free)
Chrysler Imperial Owners Manual
-
- Chrysler Imperial 1927 Owners Manual
- (91 Pages)
- (Free)
-
- Chrysler Imperial 1931 Owners Manual
- (96 Pages)
- (Free)
-
- Chrysler Imperial 1951 Owners Manual
- (29 Pages)
- (Free)
Chrysler Imperial Misc Document
- (Free)
- (Free)
- (Free)
- (Free)
- (Free)
Related Models
