Chrysler Vision Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Chrysler Vision
The Chrysler Vision also called t he Eagle Vision was a full-size, front-wheel drive sports sedan, produced from 1993-1997. It was officially presented at the 1992 North American International Auto Show in Detroit. As an LH sedan, it was Automobile Magazine's Automobile of the Year in 1993. The Vision featured a monochromatic design inside and out, with no brand or model badge on the doors (as found on the Concorde), and available aluminum wheels with a simple design. In keeping with its high-performance image, the Vision was the only LH sedan to come standard with "touring" suspension. In total, around 105,000 units were sold.Chrysler Vision FAQ's
How do I check the transmission fluid level in my Chrysler Vision?
To check the transmission fluid level in a Chrysler Vision, you should first warm up the engine and then park the vehicle on a level surface. Next, locate the transmission dipstick and remove it. Wipe it clean, reinsert it, and then remove it again to check the fluid level. The level should be between the "full" and "add" marks on the dipstick.
How do I replace the air filter in my Chrysler Vision?
To replace the air filter in a Chrysler Vision, first locate the air filter housing. Remove the clips or screws that hold the housing cover in place, and then remove the old filter. Install the new filter, making sure it is properly seated, and then replace the cover and clips or screws.
How do I replace the alternator in my Chrysler Vision?
To replace the alternator in a Chrysler Vision, first disconnect the battery cables. Remove the serpentine belt, and then disconnect the wiring harness and mounting bolts for the alternator. Install the new alternator, reconnect the wiring harness and mounting bolts, and then reinstall the serpentine belt and battery cables.
How do I replace the battery in my Chrysler Vision?
To replace the battery in a Chrysler Vision, first disconnect the negative cable from the battery. Remove the hold-down bracket and any other attachments, and then lift out the old battery. Install the new battery, making sure it is properly secured, and then reattach the hold-down bracket and cables.
How do I replace the front brake pads in my Chrysler Vision?
To replace the front brake pads in a Chrysler Vision, first loosen the lug nuts on the front wheels. Lift the vehicle and remove the wheels. Use a C-clamp to compress the caliper piston, and then remove the caliper bolts and lift off the caliper. Remove the old brake pads, install the new pads, and then reassemble the caliper and wheel.
How do I replace the fuel filter in my Chrysler Vision?
To replace the fuel filter in a Chrysler Vision, first locate the filter under the vehicle near the fuel tank. Use a wrench to disconnect the fuel lines from the filter, and then remove the old filter. Install the new filter, making sure it is properly seated, and then reconnect the fuel lines.
How do I replace the headlights in my Chrysler Vision?
To replace the headlights in a Chrysler Vision, first remove the headlight assembly by releasing the retaining clips or screws. Disconnect the wiring harness from the back of the assembly, and then remove the old bulb. Install the new bulb, reconnect the wiring harness, and then reinstall the headlight assembly.
How do I replace the rear brake shoes in my Chrysler Vision?
To replace the rear brake shoes in a Chrysler Vision, first remove the rear brake drum. Use a brake spring tool to remove the retaining springs and pins, and then remove the old brake shoes. Install the new brake shoes, making sure they are properly seated, and then reassemble the retaining springs and pins and replace the brake drum.
How do I replace the serpentine belt in my Chrysler Vision?
To replace the serpentine belt in a Chrysler Vision, first locate the belt routing diagram under the hood. Use a wrench to release the tension on the belt tensioner, and then remove the old belt. Install the new belt according to the routing diagram, and then use the wrench to release the tension on the tensioner and place the belt in its proper position.
How do I troubleshoot an engine that won't start in my Chrysler Vision?
If the engine won't start in a Chrysler Vision, first check the battery and connections to make sure they are clean and properly connected. Check the fuel system to ensure the fuel pump is functioning properly and that there is fuel in the tank. Finally, check the ignition system, including the spark plugs, ignition coil, and wiring, to ensure they are in good condition and functioning properly.
How often should I change the oil in my Chrysler Vision?
It is recommended to change the oil in a Chrysler Vision every 5,000 miles. This ensures that the engine is properly lubricated and protected from wear and tear. However, if you frequently drive in dusty or dirty conditions, it may be necessary to change the oil more frequently.
What is the recommended engine oil for a Chrysler Vision?
The recommended engine oil for a Chrysler Vision is 5W-30. This oil is recommended as it provides good lubrication in both cold and hot weather conditions. It also helps to improve fuel economy and reduce engine wear.
What type of brake fluid should I use in my Chrysler Vision?
The recommended brake fluid for a Chrysler Vision is DOT 3. This type of brake fluid has a higher boiling point than other types, which helps to prevent brake fade during hard braking. It also helps to protect the brake system from corrosion.
What type of coolant should I use in my Chrysler Vision?
The recommended coolant for a Chrysler Vision is a mixture of ethylene glycol and water, with a 50/50 ratio. This mixture provides protection against overheating and freezing, and also helps to prevent corrosion in the cooling system.
What type of spark plugs should I use in my Chrysler Vision?
The recommended spark plugs for a Chrysler Vision are platinum-tipped. These plugs last longer than traditional copper-tipped plugs, and provide better performance and fuel efficiency. It is important to use the recommended plugs to ensure proper engine function.
Chrysler Vision on Amazon
Chrysler Vision Workshop Manual
-
- Chrysler Vision 1993 Workshop Manual
- (820 Pages)
- (Free)
-
- Chrysler Vision 1994 Workshop Manual
- (1,203 Pages)
- (Free)
-
- Chrysler Vision 1997 Workshop Manual
- (1,659 Pages)
- (Free)
Related Models