Corvette C2 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Corvette C2

The Chevrolet Corvette (C2), also known as the Corvette Stingray, is a second generation of sports car produced by the Chevrolet division of General Motors for the 1963 to 1967 model years. The Q-Corvette, initiated in 1957, envisioned a smaller, more advanced Corvette as a coupe-only model. The first-ever production Corvette coupe, a futuristic fastback, sported an unusual styling element for its time period - a divided rear window. In total, 117,964 units were produced. The 1963 Corvette Rondine concept car, based on the 1963 C2 chassis was built for the 1963 Paris Auto Show. It was designed by Tom Tjaarda of Pininfarina and was sold at Barrett-Jackson 2008 for 1.6 million dollars.

Corvette C2 FAQ's

How do I adjust the headlights on my Corvette C2?

To adjust the headlights on your Corvette C2, locate the adjustment screws on the headlight assembly and use a screwdriver to adjust the beam up or down. Check the alignment against a wall or garage door to ensure the lights are properly aimed. Properly adjusted headlights improve visibility and driving safety.

How do I bleed the brakes on my Corvette C2?

To bleed the brakes on your Corvette C2, start with the wheel furthest from the master cylinder and work your way closer. Attach a clear hose to the bleeder valve and submerge the other end in a container of brake fluid. Pump the brakes and release the valve until all air bubbles are gone.

How do I change the oil in my Corvette C2?

To change the oil in your Corvette C2, first warm up the engine to ensure the oil flows more easily. Then, locate the oil drain plug and drain the old oil into a container. Next, replace the oil filter and refill the engine with the correct type and amount of oil.

How do I diagnose an issue with my Corvette C2's suspension system?

To diagnose an issue with your Corvette C2's suspension system, start by inspecting all components for damage or wear. Then, check for any leaks in the shocks or struts. Finally, test drive the vehicle and note any unusual noises or handling issues to identify the root cause of the problem.

How do I replace the air filter in my Corvette C2?

To replace the air filter in your Corvette C2, locate the air filter housing and remove the cover. Take out the old filter and replace it with a new one, ensuring it is properly seated and the cover is securely in place. Regularly replacing the air filter can improve engine performance and fuel efficiency.

How do I replace the alternator in my Corvette C2?

To replace the alternator in your Corvette C2, first disconnect the battery cables. Remove the drive belt and then the mounting bolts holding the alternator in place. Take out the old alternator and install the new one, tightening the mounting bolts and reattaching the drive belt.

How do I replace the battery in my Corvette C2?

To replace the battery in your Corvette C2, first disconnect the negative cable, then the positive cable. Remove the hold-down bracket and take out the old battery. Install the new battery, replace the hold-down bracket, and reconnect the cables, making sure they are tight and secure.

How do I replace the brake pads on my Corvette C2?

To replace the brake pads on your Corvette C2, you need to remove the wheel and the caliper. After that, take out the old brake pads and install the new ones. Make sure to properly torque the caliper bolts and reattach the wheel before testing the brakes.

How do I replace the distributor cap and rotor on my Corvette C2?

To replace the distributor cap and rotor on your Corvette C2, first remove the distributor cap by loosening any clips or screws holding it in place. Take note of the position of the rotor before removing it and then install the new one, making sure it is properly aligned. Finally, replace the cap and securely fasten any clips or screws.

How do I replace the fuel filter in my Corvette C2?

To replace the fuel filter in your Corvette C2, locate the filter under the car and use a wrench to loosen the fittings. Remove the old filter and install the new one, making sure the fittings are tightened securely. Regularly replacing the fuel filter can improve engine performance and prevent damage to the fuel injectors.

How do I replace the spark plugs in my Corvette C2?

To replace the spark plugs in your Corvette C2, first remove the spark plug wires and then use a spark plug socket to remove the old plugs. Check the gap on the new plugs and then install them, tightening them to the correct torque. Finally, reattach the spark plug wires in the correct order.

How do I replace the water pump in my Corvette C2?

To replace the water pump in your Corvette C2, first drain the coolant and remove the radiator hoses. Then, remove the drive belt and the bolts holding the water pump in place. Take out the old pump and install the new one, tightening the bolts and reattaching the drive belt and hoses.

How do I service the transmission on my Corvette C2?

To service the transmission on your Corvette C2, first consult the owner's manual to determine the recommended service interval and type of fluid to use. Then, locate the transmission pan and drain the old fluid into a container. Replace the filter and refill the transmission with the correct amount of fluid.

How do I troubleshoot an issue with my Corvette C2's electrical system?

To troubleshoot an issue with your Corvette C2's electrical system, start by checking all fuses and relays. Then, test the battery and alternator to ensure they are functioning properly. If the issue persists, consult the wiring diagrams in the repair manual to identify potential faults.

What is the recommended tire pressure for a Corvette C2?

The recommended tire pressure for a Corvette C2 depends on the specific tires you are using and the load on the vehicle. You can find this information on the tire sidewall or in the owner's manual. It is important to check and adjust tire pressure regularly to ensure safe and optimal driving performance.