Fiat Coupe Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Fiat Coupe

The Fiat Coupe was a coupe manufactured by the Italian automaker Fiat between 1993 and 2000. The car was introduced at Brussels Motor Show in 1993. It is remarkable for its distinctive, angular design, with unique scalloped side panels. The body was designed y Chris Bangle while interior was designed by Pininfarina. The Fiat Coupe made media headlines in auto magazines during 1992 after several spy shots were taken revealing the car on test. Production of this vehicle has stopped in September 2000 and total number of 72,762 units had been manufactured.

Fiat Coupe FAQ's

How do I bleed the brakes on a Fiat Coupe?

To bleed the brakes on a Fiat Coupe, first locate the brake caliper which is usually located on the wheel hub. Next, loosen the bleeder valve on the caliper and have a helper press down on the brake pedal. Then, close the bleeder valve and repeat the process until all the air is removed from the brake lines. Finally, top off the brake fluid and test the brakes.

How do I change the oil filter on a Fiat Coupe?

To change the oil filter on a Fiat Coupe, first locate the filter which is usually located under the hood of the car. Next, remove the old filter by turning it counterclockwise until it comes off. Finally, install the new filter by turning it clockwise until it is tight.

How do I check the transmission fluid on a Fiat Coupe?

To check the transmission fluid on a Fiat Coupe, first locate the transmission dipstick which is usually located under the hood of the car. Next, remove the dipstick and wipe it clean. Then, reinsert the dipstick and remove it again to check the level of fluid. The fluid level should be between the minimum and maximum marks on the dipstick.

How do I replace the air filter on a Fiat Coupe?

To replace the air filter on a Fiat Coupe, first locate the air filter housing which is usually located under the hood of the car. Next, remove the housing by unscrewing the bolts that hold it in place. Then, remove the old air filter and install the new one. Finally, reattach the housing by tightening the bolts.

How do I replace the alternator on a Fiat Coupe?

To replace the alternator on a Fiat Coupe, first locate the alternator which is usually located on the engine block. Next, remove the bolts that hold the alternator in place and disconnect the electrical connections. Then, remove the old alternator and install the new one. Finally, reconnect the electrical connections and tighten the bolts.

How do I replace the battery on a Fiat Coupe?

To replace the battery on a Fiat Coupe, first locate the battery which is usually located under the hood of the car. Next, disconnect the negative and positive terminals using a wrench. Then, remove the battery by loosening the bolts that hold it in place. Finally, install the new battery and reconnect the terminals.

How do I replace the brake pads on a Fiat Coupe?

To replace the brake pads on a Fiat Coupe, first locate the brake caliper which is usually located on the wheel hub. Next, remove the brake caliper by removing the bolts that hold it in place. Then, remove the old brake pads and install the new ones. Finally, reattach the brake caliper and tighten the bolts.

How do I replace the fuel filter on a Fiat Coupe?

To replace the fuel filter on a Fiat Coupe, first locate the fuel filter which is usually located under the car near the fuel tank. Next, relieve the fuel pressure by removing the fuel pump fuse and starting the engine until it stalls. Then, remove the old fuel filter and install the new one. Finally, reconnect the fuel pump fuse and start the engine to check for leaks.

How do I replace the spark plugs on a Fiat Coupe?

To replace the spark plugs on a Fiat Coupe, first locate the spark plugs which are usually located on the engine block. Next, remove the old spark plugs using a spark plug socket and extension. Then, install the new spark plugs and tighten them using the same socket and extension.

How do I replace the thermostat on a Fiat Coupe?

To replace the thermostat on a Fiat Coupe, first locate the thermostat housing which is usually located on the engine block. Next, drain the coolant by removing the drain plug on the radiator. Then, remove the housing and replace the thermostat. Finally, refill the coolant and check for leaks.

How do I replace the timing belt on a Fiat Coupe?

To replace the timing belt on a Fiat Coupe, first locate the timing belt cover which is usually located on the engine block. Next, remove the cover and loosen the tensioner pulley. Then, remove the old timing belt and install the new one. Finally, tighten the tensioner pulley and reattach the timing belt cover.

How do I troubleshoot an engine misfire in a Fiat Coupe?

To troubleshoot an engine misfire in a Fiat Coupe, first check the spark plugs and ignition coils for damage or wear. Then, check the fuel injectors for clogging or malfunction. Finally, check the engine compression and timing to ensure proper engine performance.

What is the recommended tire pressure for a Fiat Coupe?

The recommended tire pressure for a Fiat Coupe varies depending on the type of tire being used. However, the recommended tire pressure can usually be found on a label located inside the driver's side door jamb. It is important to maintain the proper tire pressure to ensure safe driving and to extend the life of the tires.

What type of oil should I use in a Fiat Coupe?

The type of oil that should be used in a Fiat Coupe varies depending on the model and the engine type. However, it is recommended to use synthetic oil with a viscosity rating of 5W-30. It is important to use the correct type of oil to ensure proper engine performance and to extend the life of the engine.

Fiat Coupe Manuals Index

Fiat Coupe Workshop Manual

Fiat Coupe Misc Document

Related Models