Ford F-250 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Ford F-250

The Ford F-250 is a Super Duty truck by Ford Motor Corporation introduced in 1998. It is a large, heavily built pickup with heavy duty body-onframe steel ladder frames, axles, springs, brakes, transmissions and powerful engines. These trucks are well known for their toughness and ruggedness. Although a tough, rugger truck, it comes well-furnished inside with the most modern gadgets usually found in sleek automobiles. The F-250 super duty was also recently re-introduced in this market after ten years. It is being marketed using the same engine as the Venezuelan F-350, but only with a 6-speed automatic transmission, 4x2 or 4x4 wheel drive option in both single and double cab configurations.

Ford F-250 FAQ's

How do I change the air filter on my Ford F-250?

Locate the air filter housing, which is usually near the engine. Open the housing and remove the old air filter. Install the new air filter, making sure it is properly seated and secured. Close the housing and ensure that all clips and screws are tightened.

How do I check the transmission fluid on my Ford F-250?

Start the engine and allow it to idle for a few minutes. Shift the transmission through all gears, then return it to park. Locate the transmission dipstick, remove it, and wipe it clean. Reinsert the dipstick, then remove it again and check the fluid level. If necessary, add fluid according to the manufacturer's recommendations.

How do I replace the alternator on my Ford F-250?

Disconnect the negative battery cable, then remove the serpentine belt. Disconnect the electrical connections to the alternator, then remove the bolts that secure it to the engine. Remove the old alternator and install the new one, then reconnect the electrical connections and the serpentine belt. Reconnect the negative battery cable.

How do I replace the battery on my Ford F-250?

Disconnect the negative battery cable, then the positive cable. Remove the battery hold-down clamp and lift out the old battery. Clean the battery tray, then install the new battery and secure it with the hold-down clamp. Reconnect the positive cable, then the negative cable.

How do I replace the brake pads on my Ford F-250?

Begin by removing the wheel and the brake caliper. Then, remove the old brake pads and install the new ones. Finally, reattach the brake caliper and the wheel, and repeat the process on the other side. It is important to properly torque the wheel and brake caliper bolts to ensure proper operation and safety.

How do I replace the fuel filter on my Ford F-250?

Locate the fuel filter, which is usually on the frame rail near the fuel tank. Release the fuel pressure by removing the fuel pump relay or fuse, then start the engine and let it run until it stalls. Disconnect the fuel lines from the filter, then remove and replace the filter. Reconnect the fuel lines and the fuel pump relay or fuse, then start the engine and check for leaks.

How do I replace the power steering pump on my Ford F-250?

Disconnect the negative battery cable, then remove the serpentine belt. Disconnect the power steering lines from the pump, then remove the bolts that secure it to the engine. Remove the old pump and install the new one, then reconnect the power steering lines and the serpentine belt. Reconnect the negative battery cable.

How do I replace the radiator on my Ford F-250?

Drain the coolant from the radiator, then disconnect the upper and lower radiator hoses. Disconnect the transmission cooler lines, if equipped, and remove the fan shroud and fan assembly. Remove the bolts that secure the radiator to the engine, then lift out the old radiator and install the new one. Reinstall the fan assembly and shroud, then reconnect the radiator hoses and transmission cooler lines. Refill the radiator with coolant.

How do I replace the spark plugs on my Ford F-250?

Disconnect the negative battery cable and remove the engine cover. Locate the spark plugs, then remove and replace them one at a time. It is important to use the recommended spark plugs and torque them to the proper specifications. Reinstall the engine cover and reconnect the battery cable.

How do I replace the starter on my Ford F-250?

Disconnect the negative battery cable, then remove the electrical connections to the starter. Remove the bolts that secure the starter to the engine, then remove the old starter and install the new one. Reconnect the electrical connections and the negative battery cable.

How do I replace the thermostat on my Ford F-250?

Drain the coolant from the radiator, then locate the thermostat housing. Remove the bolts that secure the housing to the engine, then remove the housing and the old thermostat. Install the new thermostat, making sure it is properly seated, then reinstall the housing and bolts. Refill the radiator with coolant.

How do I troubleshoot a misfiring engine on my Ford F-250?

Check the spark plugs, ignition coils, and fuel injectors for damage or wear. Clean or replace any components that are found to be faulty. Check the engine compression and timing, and adjust or replace components as necessary. If the problem persists, consult a qualified mechanic for further diagnosis.

What is the recommended tire pressure for a Ford F-250?

The recommended tire pressure for a Ford F-250 varies depending on the tire size and configuration. The recommended tire pressure can be found on the tire sidewall, in the owner's manual, or on a sticker inside the driver's door jamb. It is important to maintain the recommended tire pressure to ensure proper handling and safety.

What is the towing capacity of a Ford F-250?

The towing capacity of a Ford F-250 varies depending on the engine and configuration. The maximum towing capacity is 22,800 pounds for a conventional trailer and 34,000 pounds for a fifth-wheel or gooseneck trailer. It is important to follow the manufacturer's recommendations for towing and to ensure that the vehicle is properly equipped.

What type of oil should I use for my Ford F-250?

The recommended oil type for a Ford F-250 is SAE 5W-20. This type of oil provides good fuel economy and engine protection. It is important to follow the recommended oil change schedule to ensure maximum performance and longevity of the engine.

Ford F-250 Manuals Index

Ford F-250 Workshop Manual

Ford F-250 Owners Manual

Related Models

Ford F-250 on Amazon

Haynes Ford Pick-ups & Bronco: 1980 thru 1996 2WD & 4WD Full-Size F-100 Thru F-350 Gasoline Engines; 1997 2WD & 4WD Full-Size F-250HD & F-350 Gasoline Engines Repair Manual