Ford Falcon Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Ford Falcon

The Ford Falcon is an automobile which was produced by Ford Motor Company from 1960 to 1970 across three generations. Variations of the Ford Falcon were manufactured in Argentina, Australia, Canada, Chile and Mexico. The Falcon was offered in two-door and four-door sedan, two-door and four-door station wagon, two-door hardtop, convertible, sedan delivery and Ranchero pickup body configurations. For several years, the Falcon name was also used on passenger versions of the Ford Econoline van. On January 1, 1970, the Falcon name was transferred to a low priced version of the contemporary Ford Fairlane.

Ford Falcon FAQ's

How do I change the air filter on my Ford Falcon?

Changing the air filter on a Ford Falcon is an easy process that can be done in just a few minutes. First, locate the air filter housing, which is usually located near the engine. Remove the old air filter by unsnapping the clips or unbolting the housing, then insert the new air filter and reattach the housing.

How do I change the oil filter on my Ford Falcon?

Changing the oil filter on a Ford Falcon is a relatively simple process that can be done with basic tools. First, locate the oil filter, which is typically located near the engine. Use an oil filter wrench to remove the old filter, then clean the filter housing and install the new filter. Be sure to tighten the filter securely to prevent leaks.

How do I check the transmission fluid on my Ford Falcon?

Checking the transmission fluid on a Ford Falcon is a simple process that can be done in just a few minutes. First, locate the transmission dipstick, which is usually located near the engine. With the engine running and the transmission in park, remove the dipstick and wipe it clean. Reinsert the dipstick, then remove it again to check the fluid level.

How do I replace the battery on my Ford Falcon?

Replacing the battery on a Ford Falcon is a simple process that can be done with basic tools. First, locate the battery, which is usually located under the hood or in the trunk. Disconnect the negative cable, then the positive cable, and remove the old battery. Install the new battery and reconnect the cables, being sure to tighten the connections securely.

How do I replace the brake pads on my Ford Falcon?

Replacing the brake pads on a Ford Falcon is a relatively simple process that can be done with basic tools. First, remove the wheel and caliper bolts, then remove the old brake pads. Clean the brake caliper and rotor with brake cleaner, then install the new brake pads and reattach the caliper and wheel.

How do I replace the serpentine belt on my Ford Falcon?

Replacing the serpentine belt on a Ford Falcon is a relatively simple process that can be done with basic tools. First, locate the belt tensioner, which is usually located near the alternator. Use a wrench to release the tension on the belt, then remove the old belt and install the new one. Be sure to tighten the belt to the manufacturer's recommended tension.

How do I replace the spark plugs on my Ford Falcon?

Replacing the spark plugs on a Ford Falcon is a relatively simple process that can be done with basic tools. First, locate the spark plugs, which are usually located near the engine. Use a spark plug wrench to remove the old plugs, then clean the area around the spark plug holes. Install the new plugs and tighten them securely.

What is the recommended oil type for a Ford Falcon?

The recommended oil type for a Ford Falcon is 5W-30. This type of oil is designed to provide optimal performance and protection for the engine, and can help improve fuel efficiency and reduce emissions. It is important to check the oil level regularly and change the oil according to the manufacturer's recommended schedule.

What is the recommended tire pressure for a Ford Falcon?

The recommended tire pressure for a Ford Falcon varies depending on the specific model and year. However, as a general rule, the recommended tire pressure is usually between 30 and 35 PSI. It is important to check the tire pressure regularly and adjust it as needed to ensure optimal performance and safety.

Why is my Ford Falcon making a grinding noise when I brake?

If your Ford Falcon is making a grinding noise when you brake, it is likely that the brake pads are worn down and need to be replaced. This can cause damage to the brake rotors and reduce stopping power, so it is important to make the repairs as soon as possible. Be sure to inspect the entire braking system for signs of wear or damage.

Why is my Ford Falcon making a rattling noise?

If your Ford Falcon is making a rattling noise, it could be due to a number of issues, including loose or worn components, a damaged exhaust system, or a malfunctioning engine. It is important to diagnose the issue quickly and make any necessary repairs to prevent further damage. Be sure to inspect the entire vehicle for signs of wear or damage.

Why is my Ford Falcon not starting?

There are several reasons why a Ford Falcon may not be starting, including a dead battery, a faulty starter motor, or a bad alternator. It is important to diagnose the issue quickly and make any necessary repairs to prevent further damage. Be sure to check the battery connections and test the electrical system components for proper function.

Why is my Ford Falcon overheating?

There are several reasons why a Ford Falcon may be overheating, including a malfunctioning thermostat, a clogged radiator, or a damaged water pump. It is important to diagnose the issue quickly and make any necessary repairs to prevent engine damage. Be sure to check the coolant level and inspect the cooling system components for signs of wear or damage.

Why is my Ford Falcon stalling or hesitating?

There are several reasons why a Ford Falcon may be stalling or hesitating, including a clogged fuel filter, a malfunctioning fuel pump, or a dirty air filter. It is important to diagnose the issue quickly and make any necessary repairs to prevent further damage. Be sure to inspect the entire fuel and air intake system for signs of wear or damage.

Why is my Ford Falcon's check engine light on?

If your Ford Falcon's check engine light is on, it could be due to a number of issues, including a malfunctioning oxygen sensor, a loose gas cap, or a faulty catalytic converter. It is important to diagnose the issue quickly and make any necessary repairs to prevent further damage. Be sure to have the vehicle scanned for codes to determine the cause of the issue.

Ford Falcon Manuals Index

Ford Falcon Workshop Manual

Ford Falcon Owners Manual

Ford Falcon Misc Document

Related Models