Infiniti G35 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Infiniti G35

The Infiniti G-series is a line of compact executive/entry-level luxury car that was produced by the Infiniti division of Nissan for the 1990 1996 and 1998 present model years. The G35 is based on the Nissan FM platform shared with the Nissan 350Z coupe and roadster sports car and Infiniti FX crossover SUV. It was built with both manual and automatic transmission styles. The G35 was Motor Trend's Car of the Year for 2003 and has been well received by both the media and customers as a viable alternative to other luxury cars. The G35 was also nominated for the North American Car of the Year award that year and was on the Car and Driver Ten Best list for 2003 and 2004.

Infiniti G35 FAQ's

How can I reset the maintenance light on an Infiniti G35?

To reset the maintenance light on an Infiniti G35, turn the ignition switch to the "ON" position without starting the engine. Next, press the trip odometer reset button until the maintenance reminder is displayed on the instrument cluster. Then, press and hold the reset button until the reminder resets to 100%. Once reset, the maintenance light should no longer be illuminated.

How do I change the oil in an Infiniti G35?

To change the oil in an Infiniti G35, you will need to locate the oil drain plug underneath the engine and place a drain pan underneath it. Remove the drain plug and allow the old oil to drain completely. Once drained, replace the drain plug and remove the oil filter. Install a new oil filter and then refill the engine with the recommended amount of oil as specified in the manual.

How do I check and replace the engine coolant in an Infiniti G35?

To check the engine coolant level in an Infiniti G35, first, ensure the engine has cooled down. Locate the coolant reservoir and visually check the level against the "Full" and "Low" marks. If it is low, add a mixture of coolant and distilled water as recommended by the manufacturer. To replace the engine coolant, refer to the specific instructions in the owner's manual, as the process may vary depending on the model and year of your Infiniti G35.

How do I check the transmission fluid level in an Infiniti G35?

To check the transmission fluid level in an Infiniti G35, start the engine and allow it to warm up to normal operating temperature. Locate the transmission dipstick, usually labeled "ATF" or "Transmission," and pull it out. Wipe it clean, reinsert it fully, and then remove it again to check the fluid level. The fluid should be between the "Hot" and "Cold" marks on the dipstick. If it is low, add the recommended transmission fluid as specified in the owner's manual.

How do I jump-start an Infiniti G35?

To jump-start an Infiniti G35, first, position the assisting vehicle close to the dead battery, ensuring both vehicles are turned off. Connect one end of the positive (red) jumper cable to the positive terminal of the dead battery. Connect the other end of the positive jumper cable to the positive terminal of the assisting vehicle's battery. Connect one end of the negative (black) jumper cable to the negative terminal of the assisting vehicle's battery. Finally, connect the other end of the negative jumper cable to a solid, unpainted metal surface away from the dead battery on the Infiniti G35.

How do I replace a fuse in an Infiniti G35?

To replace a fuse in an Infiniti G35, first, locate the fuse box, which is usually located in the engine compartment or under the dashboard. Open the fuse box cover and locate the fuse that needs to be replaced. Use the fuse diagram on the inside of the fuse box cover or in the owner's manual to identify the correct fuse. Once identified, firmly grasp the fuse with a fuse puller or a pair of needle-nose pliers and pull it straight out. Insert a new fuse of the same amperage rating and push it firmly into place.

How do I replace a headlight bulb in an Infiniti G35?

To replace a headlight bulb in an Infiniti G35, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector from the bulb, then twist and remove the old bulb counterclockwise. Insert the new bulb into the socket, making sure it is securely in place, and reconnect the electrical connector. Finally, test the headlight to ensure it is functioning properly before closing the hood.

How do I replace the cabin air filter in an Infiniti G35?

To replace the cabin air filter in an Infiniti G35, locate the filter housing, which is typically located behind the glove compartment. Open the glove compartment and remove any necessary screws or clips to access the filter housing. Once the housing is exposed, remove the old filter by sliding it out. Clean the filter housing if necessary, then insert the new cabin air filter, ensuring it is properly aligned. Finally, reassemble the glove compartment and ensure it closes securely.

How do I replace the serpentine belt in an Infiniti G35?

To replace the serpentine belt in an Infiniti G35, locate the belt tensioner pulley and use a wrench or belt tensioner tool to relieve tension on the belt. Slide the old belt off the pulleys, making note of the belt routing, and then install the new belt in the same configuration. Slowly release the tensioner, allowing it to apply tension to the new belt. Finally, visually inspect the belt to ensure it is properly aligned on all pulleys and running smoothly.

How do I replace the windshield wipers on an Infiniti G35?

To replace the windshield wipers on an Infiniti G35, lift the wiper arm away from the windshield until it locks into an upright position. Locate the release tab on the wiper blade, and press or squeeze it to release the blade from the wiper arm. Attach the new wiper blade by sliding it onto the wiper arm until it clicks into place. Finally, gently lower the wiper arm back onto the windshield.

How do I troubleshoot a malfunctioning power window in an Infiniti G35?

If a power window in an Infiniti G35 is not functioning correctly, start by checking the fuse associated with the power windows. Locate the fuse box, check the fuse diagram to identify the power window fuse, and replace it if necessary. If the fuse is not the issue, check if all other windows are functioning correctly. If they are, the problem may be with the specific window motor or switch, requiring further inspection or professional assistance.

How often should I replace the air filter in an Infiniti G35?

It is recommended to replace the air filter in an Infiniti G35 every 15,000 to 30,000 miles or as specified in the owner's manual. However, if you drive in dusty or polluted environments, it may be necessary to replace the air filter more frequently. A clogged or dirty air filter can reduce engine performance and fuel efficiency, so regular replacement is vital to maintain optimal air flow to the engine.

How often should I replace the brake pads in an Infiniti G35?

The frequency of brake pad replacement in an Infiniti G35 can vary depending on driving habits, road conditions, and pad material. Generally, brake pads should be inspected every 12,000 to 15,000 miles and replaced if they are worn down to approximately 3mm. However, it is essential to refer to the owner's manual and follow the manufacturer's recommendations for your specific model and year.

What is the recommended tire pressure for an Infiniti G35?

The recommended tire pressure for an Infiniti G35 is typically between 32 to 35 PSI (pounds per square inch), but it is essential to check the specific tire pressure recommendations provided by the vehicle's manufacturer. To find the correct tire pressure, refer to the owner's manual or the sticker located inside the driver's side door jamb. Maintaining the proper tire pressure helps ensure optimal fuel efficiency, handling, and tire longevity.

Infiniti G35 Manuals Index

Infiniti G35 Workshop Manual

Infiniti G35 Owners Manual

Infiniti G35 Misc Document

Related Models

Infiniti G35 on Amazon

Nissan 350Z & Infiniti G35 2003 thru 2008 Haynes Repair Manual