Jeep Renegade Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Jeep Renegade
The Jeep Renegade (BU) is a subcompact crossover SUV (mini SUV in Europe) from the Jeep division of Fiat Chrysler Automobiles. It was initially shown to the public in March 2014 at the Geneva Motor Show and mass-production started in late August of that year. The Renegade offers two four-wheel drive systems Active Drive I and Active Drive Low, both of which are paired with Jeep's Selec-Terrain System. It is also available with My Sky dual panel removable roof. It is manufactured with both manual and automatic transmission styles.Jeep Renegade FAQ's
How do I change the air filter on my Jeep Renegade?
To change the air filter on a Jeep Renegade, locate the air filter housing, usually located near the engine. Unclip or unscrew the housing cover, remove the old air filter, and clean any debris or dirt from the housing. Install the new air filter, ensuring it is properly positioned, and reattach the housing cover securely.
How do I change the spark plugs on my Jeep Renegade?
To change the spark plugs on a Jeep Renegade, locate the spark plug wires or ignition coil packs, depending on the specific engine configuration. Disconnect the wires or coil packs, use a spark plug socket and ratchet to remove the old spark plugs, and install the new spark plugs, tightening them to the recommended torque. Finally, reconnect the spark plug wires or coil packs.
How do I check the battery in my Jeep Renegade?
To check the battery in a Jeep Renegade, open the hood and locate the battery. Check for any signs of corrosion or damage on the battery terminals and cables. Using a multimeter, measure the battery voltage. A fully charged battery should read around 12.6 volts. If the voltage is significantly lower, it may indicate a weak or discharged battery that needs to be replaced.
How do I check the brake pads on my Jeep Renegade?
To check the brake pads on a Jeep Renegade, safely lift the vehicle and remove the wheels. Inspect the brake calipers to locate the brake pads. Measure the thickness of the brake pads using a caliper or visual inspection. If the pads are worn down to the minimum thickness indicated by the manufacturer, they should be replaced to ensure proper braking performance.
How do I check the transmission fluid level in my Jeep Renegade?
To check the transmission fluid level in a Jeep Renegade, park the vehicle on a level surface, start the engine, and let it idle for a few minutes. Then, locate the transmission fluid dipstick, remove it, wipe it clean, reinsert it, and remove it again to check the fluid level. The fluid level should be within the designated range indicated on the dipstick.
How do I replace a burnt-out headlight bulb on my Jeep Renegade?
To replace a burnt-out headlight bulb on a Jeep Renegade, open the hood and locate the headlight assembly. Disconnect the electrical connector from the back of the headlight bulb, then twist and remove the bulb from the assembly. Install the new bulb by reversing the steps, ensuring it is securely in place before reconnecting the electrical connector.
How do I replace the cabin air filter on my Jeep Renegade?
To replace the cabin air filter on a Jeep Renegade, locate the filter housing, typically located behind the glove box or under the dashboard. Remove the housing cover, take out the old cabin air filter, and clean any debris or dirt from the housing. Install the new cabin air filter, ensuring it is properly oriented, and reattach the housing cover securely.
How do I replace the windshield wiper blades on my Jeep Renegade?
To replace the windshield wiper blades on a Jeep Renegade, lift the wiper arm away from the windshield and locate the release tab or button on the wiper blade assembly. Press or slide the release mechanism to detach the old wiper blade, then attach the new wiper blade by aligning the adapter with the wiper arm and pressing it firmly until it clicks into place.
How do I reset the oil change indicator on my Jeep Renegade?
To reset the oil change indicator on a Jeep Renegade, turn the ignition switch to the "ON" position without starting the engine. Fully depress the accelerator pedal slowly three times within 10 seconds. Turn the ignition switch to the "OFF" position, and then start the engine to verify that the oil change indicator has been successfully reset.
How do I reset the tire pressure monitoring system on my Jeep Renegade?
To reset the tire pressure monitoring system on a Jeep Renegade, start the vehicle and ensure all tires are properly inflated to the recommended pressure. Then, press and hold the TPMS reset button, usually located on the instrument panel or steering wheel, until the TPMS indicator light flashes and turns off. This indicates that the system has been successfully reset.
How often should I change the oil in my Jeep Renegade?
The oil in a Jeep Renegade should be changed every 7,500 miles or every 12 months, whichever comes first. Regular oil changes help maintain engine performance and prolong the life of the vehicle. It is important to use the recommended oil grade and follow the manufacturer's guidelines for optimal results.
What is the recommended brake fluid for my Jeep Renegade?
The recommended brake fluid for a Jeep Renegade is typically a DOT 3 or DOT 4 brake fluid. It is crucial to use the brake fluid type specified in the owner's manual to ensure proper brake system performance and prevent potential damage. Regularly check the brake fluid level and top it up as needed using the recommended type.
What is the recommended coolant type for my Jeep Renegade?
The recommended coolant type for a Jeep Renegade is typically an ethylene glycol-based coolant with a 50/50 mix of coolant and distilled water. It is important to use the coolant type specified in the owner's manual to ensure proper engine cooling and prevent corrosion or damage to the cooling system.
What is the recommended tire pressure for my Jeep Renegade?
The recommended tire pressure for a Jeep Renegade is typically around 35 PSI. However, it is always best to consult the specific model's owner's manual for accurate and up-to-date information. Maintaining proper tire pressure ensures better fuel efficiency, improved handling, and increased safety on the road.
What is the towing capacity of a Jeep Renegade?
The towing capacity of a Jeep Renegade can vary depending on the specific model and equipment. However, most Jeep Renegade models have a towing capacity ranging from 1,000 to 2,000 pounds. It is essential to consult the vehicle's owner's manual or contact a Jeep dealership to determine the exact towing capacity for a particular model.
Jeep Renegade Owners Manual
-
- Jeep Renegade 2015 Owners Manual
- (672 Pages)
- (Free)
Jeep Renegade Misc Document
-
- Jeep Renegade 2015 Misc Documents Brochure
- (30 Pages)
- (Free)
-
- Jeep Renegade 2015 Misc Documents Uconnect Guide
- (250 Pages)
- (Free)
-
- Jeep Renegade 2015 Misc Documents User Guide
- (224 Pages)
- (Free)
