Mazda B series Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Mazda B series

The Mazda B-Series is a pickup truck, first manufactured in 1961 by Mazda Motor Corporation. Since the launch of the B-Series, Mazda has used the engine displacement to determine each model's name; the B1500 had a 1.5 L engine and the B2600 had a 2.6 L engine. The Mazda B-Series bonnet truck was introduced in Japan in August 1961 as the B1500 (BUA61). It had a 1484 cc OHV water-cooled engine with wet sleeve cylinders which produced 60 PS (44 kW; 59 hp), and a one-ton payload. Fifth generation was produced from 1998 until 2006. It had a 2.6-liter inline-four engine, four-wheel-drive model and an entry level model with a 2.2-liter inline-four with rear-wheel-drive.

Mazda B series FAQ's

How do I adjust the idle speed in my Mazda B series?

To adjust the idle speed in your Mazda B series, start by locating the idle speed adjustment screw, usually found on the throttle body. With the engine running and fully warmed up, turn the adjustment screw clockwise to increase the idle speed and counterclockwise to decrease it. Make small adjustments and monitor the idle speed until it reaches the desired level. It is recommended to consult the automotive repair manual for specific instructions and precautions.

How do I change the oil in my Mazda B series?

To change the oil in your Mazda B series, start by locating the oil drain plug underneath the engine and placing an oil pan beneath it. Unscrew the drain plug and let the old oil drain completely. Once drained, replace the drain plug and remove the oil filter, replacing it with a new one. Finally, refill the engine with the recommended amount and type of oil specified in the Mazda B series automotive repair manual.

How do I check the transmission fluid level in my Mazda B series?

To check the transmission fluid level in your Mazda B series, park the vehicle on a level surface and engage the parking brake. Locate the transmission dipstick, usually labeled "ATF." Remove the dipstick, wipe it clean, and reinsert it fully. Remove the dipstick again and check the fluid level. The level should be within the designated range indicated on the dipstick.

How do I replace a blown fuse in my Mazda B series?

To replace a blown fuse in your Mazda B series, start by identifying the fuse box location, usually found in the engine compartment or under the dashboard. Open the fuse box cover and locate the specific fuse corresponding to the malfunctioning component. Use the fuse puller tool or a pair of needle-nose pliers to carefully remove the blown fuse. Replace it with a new fuse of the same rating and secure the fuse box cover back in place.

How do I replace a faulty headlight bulb in my Mazda B series?

To replace a faulty headlight bulb in your Mazda B series, start by opening the hood and locating the back of the headlight assembly. Disconnect the electrical connector from the bulb and remove any retaining clips or covers. Carefully remove the old bulb and insert the new bulb, ensuring it is securely in place. Reconnect the electrical connector and test the headlight before closing the hood.

How do I replace the air filter in my Mazda B series?

To replace the air filter in your Mazda B series, locate the air filter housing, usually on top of the engine. Open the housing and carefully remove the old air filter, taking note of its orientation. Clean the inside of the housing if necessary and insert the new air filter, ensuring it is properly seated. Close the housing and secure any clips or fasteners.

How do I replace the brake pads on my Mazda B series?

To replace the brake pads on your Mazda B series, start by safely lifting the vehicle and removing the wheel. Locate the caliper mounting bolts and remove them to access the brake pads. Slide out the old brake pads and replace them with new ones, making sure they are properly aligned. Reinstall the caliper and tighten the mounting bolts. Repeat the process for all wheels.

How do I replace the serpentine belt in my Mazda B series?

To replace the serpentine belt in your Mazda B series, start by locating the belt routing diagram, usually found on a sticker under the hood or in the automotive repair manual. Use a wrench or tensioner tool to relieve tension on the belt and remove it from the pulleys. Install the new belt following the correct routing as indicated in the diagram. Finally, release the tensioner and ensure the belt is properly seated on all pulleys.

How do I replace the spark plugs in my Mazda B series?

To replace the spark plugs in your Mazda B series, start by locating the spark plug wires and carefully removing them from the spark plugs. Use a spark plug socket and ratchet to remove the old spark plugs. Check the gap on the new spark plugs and adjust if necessary. Install the new spark plugs, ensuring they are properly tightened, and reconnect the spark plug wires in their correct order.

How do I reset the check engine light in my Mazda B series?

To reset the check engine light in your Mazda B series, start by ensuring that the underlying issue causing the light to illuminate has been resolved. Once the issue is fixed, you can reset the check engine light by disconnecting the negative battery terminal for approximately 15 minutes. Reconnect the terminal, and the check engine light should reset. If the light persists, further diagnosis may be required.

How do I troubleshoot an electrical issue in my Mazda B series?

When troubleshooting an electrical issue in your Mazda B series, start by checking the fuse box for any blown fuses. Inspect the battery terminals for corrosion or loose connections. Ensure that all relevant switches, such as the ignition switch or power window switches, are in the correct position. If the issue persists, consult the automotive repair manual for specific diagnostic procedures or consider seeking professional assistance.

How often should I rotate the tires on my Mazda B series?

The recommended tire rotation interval for your Mazda B series can be found in the automotive repair manual. However, as a general guideline, it is recommended to rotate the tires every 6,000-8,000 miles or every six months, whichever comes first. Regular tire rotations help promote even tire wear, improve traction, and extend tire life.

What are the recommended maintenance intervals for my Mazda B series?

The recommended maintenance intervals for your Mazda B series can be found in the automotive repair manual. These intervals usually include tasks such as oil changes, filter replacements, fluid checks, and component inspections. Following the recommended maintenance schedule helps ensure the longevity and optimal performance of your vehicle.

What is the recommended tire pressure for my Mazda B series?

The recommended tire pressure for your Mazda B series can be found in the automotive repair manual. However, as a general guideline, the recommended tire pressure is typically between 32-35 PSI for both the front and rear tires. Proper tire pressure ensures optimal handling, fuel efficiency, and tire longevity.

What type of coolant should I use in my Mazda B series?

The type of coolant recommended for your Mazda B series can be found in the automotive repair manual. However, as a general guideline, Mazda usually recommends using a mixture of ethylene glycol-based antifreeze and distilled water in a 50:50 ratio. This coolant mixture provides protection against freezing, boiling, and corrosion while maintaining the engine's optimal operating temperature.

Mazda B series Manuals Index

Mazda B series Workshop Manual

Mazda B series Owners Manual

Mazda B series Misc Document

Related Models

Mazda B series on Amazon

Ford Ranger Pick Ups 2000-11/Mazda B-Series Pick Ups (Chilton) (Chilton's Total Car Care Repair Manuals)