Mercedes A 160 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Mercedes A 160

The Mercedes-Benz A-Class is a compact car produced by the German automobile manufacturer Mercedes-Benz. The first generation (W168) was introduced in 1997, the second generation model (W169) appeared in late 2004, and the third generation model (W176) was launched in 2012. The W169 Model facelift changes included redesigned front and rear bumpers and lights, and stop-start function option on A 150 and 170 models. The five-door Saloon and the three-door Coupé vehicles were unveiled in spring 2008, alongside the refreshed 2009 M-Class and B-Class. One of the early models is A 160 CDI. The A-Class is a front wheel drive car and features traction control (ASR) as standard, as well as electronic stability control and anti-lock brakes (ABS).

Mercedes A 160 FAQ's

How do I adjust the headlights on a Mercedes A 160?

To adjust the headlights on a Mercedes A 160, park the vehicle on a level surface facing a flat wall or garage door. Locate the headlight adjustment screws, which are typically found on the back of the headlight assembly. Use a screwdriver or a dedicated headlight adjustment tool to adjust the horizontal and vertical aim of the headlights. It is advisable to follow the specific instructions provided in the Mercedes A 160 repair manual to ensure proper adjustment and avoid blinding oncoming drivers.

How do I bleed the brake system in a Mercedes A 160?

To bleed the brake system in a Mercedes A 160, start by filling the brake fluid reservoir to the recommended level. Begin with the brake caliper or wheel cylinder furthest from the master cylinder and attach a clear plastic tube to the bleeder valve. Submerge the other end of the tube in a container partially filled with brake fluid. Have a helper slowly depress the brake pedal while you open the bleeder valve to release air and old fluid. Repeat this process until all air bubbles are eliminated and clean fluid is flowing through the tube. Refer to the Mercedes A 160 repair manual for the specific bleeding sequence and detailed instructions.

How do I change the engine oil in a Mercedes A 160?

To change the engine oil in a Mercedes A 160, start by locating the oil drain plug underneath the engine. Once found, place a drain pan underneath and unscrew the plug to drain the old oil. After draining, replace the drain plug and proceed to remove the oil filter. Install a new oil filter, then refill the engine with the recommended amount and type of oil specified in the manual.

How do I diagnose a faulty alternator in a Mercedes A 160?

If you suspect a faulty alternator in a Mercedes A 160, start by checking the battery voltage with the engine off. A fully charged battery should read around 12.6 volts. Start the engine and measure the voltage again. It should read around 13.8 to 14.4 volts. If the voltage remains low or drops significantly, it indicates a potential issue with the alternator. Further diagnosis can be performed using a multimeter to test the alternator's output and charging system components. For detailed instructions and testing procedures, consult the Mercedes A 160 repair manual.

How do I replace a blown fuse in a Mercedes A 160?

If a fuse in a Mercedes A 160 has blown, it can be replaced by following these steps: (1) Locate the fuse box, which is usually found under the dashboard or in the engine compartment. (2) Identify the fuse that corresponds to the affected component using the fuse box diagram provided in the manual. (3) Using a fuse puller or tweezers, carefully remove the blown fuse. (4) Insert a new fuse of the same rating into the designated slot. It is crucial to use the correct fuse rating to prevent electrical issues or damage. For detailed instructions and fuse specifications, refer to the Mercedes A 160 repair manual.

How do I replace a broken side mirror on a Mercedes A 160?

To replace a broken side mirror on a Mercedes A 160, start by removing the interior door panel to access the mirror mounting bolts. Disconnect any electrical connectors or wiring attached to the mirror. Remove the mounting bolts and carefully detach the broken mirror from the vehicle. Install the new mirror by reversing the steps, ensuring it is securely attached and all electrical connections are properly reconnected. It is advisable to consult the Mercedes A 160 repair manual for any model-specific instructions or additional considerations.

How do I replace a faulty battery in a Mercedes A 160?

To replace a faulty battery in a Mercedes A 160, start by disconnecting the negative (-) battery terminal followed by the positive (+) terminal. Remove any battery covers or brackets securing the battery in place. Lift out the old battery and dispose of it appropriately. Install the new battery, ensuring it is properly aligned and securely held in position. Finally, reconnect the positive (+) terminal followed by the negative (-) terminal. It is important to refer to the Mercedes A 160 repair manual for any specific battery replacement procedures or precautions.

How do I replace a faulty spark plug in a Mercedes A 160?

When replacing a faulty spark plug in a Mercedes A 160, start by locating the spark plug wires or ignition coil packs depending on the specific engine configuration. Carefully disconnect the wire or coil pack from the spark plug, ensuring not to damage any surrounding components. Use a spark plug socket and ratchet to remove the old spark plug. Before installing the new spark plug, ensure it is properly gapped according to the specifications in the Mercedes A 160 repair manual. Finally, reinstall the spark plug wire or ignition coil pack, making sure it is securely connected.

How do I replace the brake pads on a Mercedes A 160?

To replace the brake pads on a Mercedes A 160, start by loosening the lug nuts on the wheel, then lift the vehicle using a jack and secure it with jack stands. Remove the wheel to access the brake caliper. Unbolt the caliper and carefully remove it from the rotor. Next, remove the old brake pads and install the new ones, ensuring they are properly aligned. Finally, reassemble the caliper, mount the wheel back on, and tighten the lug nuts.

How do I reset the service indicator on a Mercedes A 160?

To reset the service indicator on a Mercedes A 160, follow these steps: (1) Turn the ignition key to position 1 without starting the engine. (2) Press and hold the trip reset button on the instrument cluster. (3) While holding the button, turn the ignition key to position 2. (4) Continue holding the button until the service indicator resets. The exact procedure may vary slightly depending on the specific model year, so it is recommended to consult the Mercedes A 160 repair manual for the accurate reset procedure.

How often should I replace the air filter in a Mercedes A 160?

The air filter in a Mercedes A 160 should be replaced at regular intervals to ensure optimal engine performance and fuel efficiency. The recommended replacement interval can vary depending on driving conditions, but a general guideline is to replace the air filter every 12,000 to 15,000 miles or once a year. However, it is always advisable to consult the specific recommendations outlined in the Mercedes A 160 repair manual for accurate guidance.

What are the recommended tire pressures for a Mercedes A 160?

The recommended tire pressures for a Mercedes A 160 can usually be found on a sticker located on the driver's door jamb or inside the fuel filler door. It is important to follow these recommendations for optimal handling, fuel efficiency, and tire wear. If the sticker is missing, consult the Mercedes A 160 repair manual for the correct tire pressures based on the tire size and load capacity of the vehicle.

What does it mean if the "Check Engine" light is illuminated in a Mercedes A 160?

If the "Check Engine" light is illuminated in a Mercedes A 160, it indicates that the vehicle's onboard diagnostic system has detected a potential issue with the engine or its components. It is recommended to consult the Mercedes A 160 repair manual to retrieve the specific diagnostic trouble codes (DTCs) associated with the light. Once the DTCs are obtained, further troubleshooting and repair can be performed based on the manual's instructions.

What type of coolant should I use in a Mercedes A 160?

For a Mercedes A 160, it is important to use the recommended coolant type specified in the vehicle's manual. Typically, Mercedes vehicles require a specific type of coolant known as "Mercedes-Benz Antifreeze/Coolant" or a compatible coolant that meets the required specifications. Using the correct coolant is crucial to maintain the engine's cooling system efficiency and prevent potential issues such as overheating or corrosion. Always consult the Mercedes A 160 repair manual for the precise coolant type and any specific instructions for coolant replacement.

Mercedes A 160 Manuals Index

Mercedes A 160 Workshop Manual

Mercedes A 160 Owners Manual

Related Models