Mercedes C 220 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Mercedes C 220
The Mercedes-Benz C-Class is a line of compact executive cars produced by Daimler AG. Introduced in 1993 as a replacement for the 190 (W201) range, the C-Class was the smallest model in the marque's lineup until the A-Class arrived in 1997. Although originally sold as sedan and station wagon, the W203 series in 2000 debuted a fastback/hatchback coupe version that, when facelifted, became the Mercedes-Benz CLC-Class. On 10 December 2009, Daimler announced the production of the C-Class will be concentrated at the Bremen plant with additional production in the United States for the local market. C 220 can accelerate from 0-62 mph in 7.7 seconds. This model has top speed listed as 145 mph.
Mercedes C 220 FAQ's
How do I change the oil in a Mercedes C 220?
To change the oil in a Mercedes C 220, you will need to locate the oil drain plug underneath the engine and remove it to drain the old oil. Once the oil has fully drained, replace the drain plug and refill the engine with the recommended oil grade and quantity specified in the manual. It is important to also replace the oil filter during this process to ensure optimal engine performance and longevity.
How do I check and top up the power steering fluid in a Mercedes C 220?
To check and top up the power steering fluid in a Mercedes C 220, locate the power steering fluid reservoir, typically near the engine. Remove the cap and check the fluid level. If it is below the recommended level, add the appropriate power steering fluid until it reaches the correct level. Avoid overfilling and use the recommended fluid type specified in the manual.
How do I check the condition of the serpentine belt in a Mercedes C 220?
To check the condition of the serpentine belt in a Mercedes C 220, visually inspect it for any signs of cracking, fraying, or excessive wear. It is also important to check the belt tension by pressing down on it with moderate pressure. If the belt feels loose or shows signs of damage, it should be replaced promptly to prevent potential engine damage or failure. Regularly inspecting the serpentine belt is crucial for maintaining proper engine performance and reliability.
How do I check the transmission fluid level in a Mercedes C 220?
To check the transmission fluid level in a Mercedes C 220, start the engine and allow it to reach normal operating temperature. Locate the transmission dipstick, usually labeled, and remove it. Wipe it clean, reinsert it fully, then remove it again to check the fluid level. The fluid should be within the recommended range indicated on the dipstick. If necessary, add the appropriate transmission fluid to maintain the correct level.
How do I replace a battery in a Mercedes C 220?
To replace a battery in a Mercedes C 220, start by turning off the ignition and ensuring all electrical components are switched off. Locate the battery, typically located in the trunk or under the hood. Disconnect the negative (black) terminal first, followed by the positive (red) terminal. Remove any retaining brackets, then carefully lift out the old battery. Install the new battery in the reverse order, ensuring proper terminal connections and tightening securely.
How do I replace a cabin air filter in a Mercedes C 220?
To replace a cabin air filter in a Mercedes C 220, locate the cabin air filter housing, usually located behind the glove compartment or under the dashboard. Open the housing and remove the old filter, taking note of its orientation. Install the new cabin air filter in the correct direction, ensuring a proper fit. Close the housing securely, making sure there are no gaps or loose connections. Regularly replacing the cabin air filter ensures clean and fresh air inside the vehicle's cabin.
How do I replace a headlight bulb in a Mercedes C 220?
To replace a headlight bulb in a Mercedes C 220, open the hood and locate the back of the headlight assembly. Twist the bulb socket counterclockwise to remove it. Pull out the old bulb and insert the new one, being careful not to touch the glass with bare hands. Twist the socket back into place and test the new bulb before closing the hood.
How do I replace a spark plug in a Mercedes C 220?
To replace a spark plug in a Mercedes C 220, start by locating the spark plug wires or ignition coils. Carefully disconnect the wire or coil from the spark plug, then use a spark plug socket and ratchet to remove the old spark plug. Inspect the new spark plug for any damage or defects before installing it. Tighten the new spark plug securely, then reconnect the wire or coil. Repeat the process for each spark plug.
How do I replace the air filter in a Mercedes C 220?
To replace the air filter in a Mercedes C 220, locate the air filter housing, typically located near the engine. Open the housing and remove the old air filter. Clean the housing if necessary, then install the new air filter ensuring a proper fit. Close the housing securely and make sure there are no gaps or loose connections.
How do I reset the maintenance light on a Mercedes C 220?
To reset the maintenance light on a Mercedes C 220, insert the key into the ignition and turn it to the "on" position without starting the engine. Within 4 seconds, press and hold the "0" button on the instrument cluster until the service indicator resets. Release the button and turn off the ignition. When you start the vehicle again, the maintenance light should be reset.
How do I reset the tire pressure monitoring system on a Mercedes C 220?
To reset the tire pressure monitoring system on a Mercedes C 220, ensure all tires are properly inflated to the recommended pressure. Start the vehicle and navigate to the tire pressure monitoring system menu on the instrument cluster display. Select the "Reset" or "Calibrate" option and follow the on-screen prompts to complete the reset process. The tire pressure monitoring system should now be reset and accurately monitoring the tire pressures.
How often should I replace the brake pads on a Mercedes C 220?
The frequency of brake pad replacement on a Mercedes C 220 depends on various factors such as driving style, road conditions, and mileage. However, as a general guideline, brake pads should be inspected every 20,000-30,000 miles and replaced if necessary. It is crucial to monitor the condition of the brake pads regularly to ensure optimal braking performance and safety.
What is the recommended coolant for a Mercedes C 220?
The recommended coolant for a Mercedes C 220 can be found in the vehicle's manual. It is essential to use the correct coolant type and adhere to the recommended mixture ratio to prevent engine overheating and potential damage. Always use coolant that meets the specifications provided by the manufacturer.
What is the recommended engine oil viscosity for a Mercedes C 220?
The recommended engine oil viscosity for a Mercedes C 220 can be found in the vehicle's manual. It is crucial to use the correct oil viscosity for proper lubrication and engine performance. Different climate conditions may require different oil viscosities, so it is important to consult the manual to ensure the right oil is used.
What is the recommended tire pressure for a Mercedes C 220?
The recommended tire pressure for a Mercedes C 220 can be found in the vehicle's manual. It is crucial to maintain the correct tire pressure for optimal handling, fuel efficiency, and tire longevity. In order to ensure safety and performance, regularly check the tire pressure using a reliable gauge and adjust it accordingly.
Get notified for new manuals?
We'll send you a quick email when a new Mercedes C 220 manual is added.