Mercedes E 260 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Mercedes E 260
The Mercedes-Benz E-Class is a range of executive cars manufactured by Mercedes-Benz in various engine and body configurations produced since 1992. The 'E-Class' name first appeared in the USA with the face-lifted W124 for the model year 1994 (the W124 was introduced in the US in 1986 but continued with the older naming convention until 1993, when all Mercedes-Benz models switched to a new system, e.g., E320 instead of 300E). The diesel versions continued to be the fuel economy option over the four and six-cylinder gasoline engines, and the gasoline V8 engines (available after 1992) increased gasoline power outputs further. Four-cylinder gasoline models were not marketed in the United States.
Mercedes E 260 FAQ's
How do I change the engine oil in a Mercedes E 260?
To change the engine oil in a Mercedes E 260, start by locating the oil drain plug underneath the vehicle. Remove the plug to drain the old oil into a suitable container. Once drained, replace the drain plug and proceed to refill the engine with the recommended oil grade and quantity. It is important to follow the manufacturer's guidelines for proper oil change intervals to maintain optimal engine performance and longevity.
How do I check the brake fluid level in a Mercedes E 260?
To check the brake fluid level in a Mercedes E 260, start by locating the brake fluid reservoir, typically found in the engine compartment. Ensure the vehicle is on a level surface and remove the reservoir cap. Check the fluid level against the markings on the reservoir, ensuring it falls within the recommended range. If necessary, add the recommended brake fluid to bring the level to the appropriate mark. It is important to use the correct brake fluid type as specified in the owner's manual or repair manual.
How do I check the transmission fluid level in a Mercedes E 260?
To check the transmission fluid level in a Mercedes E 260, start the engine and allow it to reach normal operating temperature. Locate the transmission fluid dipstick, usually located near the back of the engine bay. Remove the dipstick, wipe it clean, and reinsert it fully. Remove the dipstick again and check the fluid level, ensuring it falls within the designated range. If necessary, add the recommended transmission fluid through the dipstick tube using a funnel.
How do I replace a blown fuse in a Mercedes E 260?
To replace a blown fuse in a Mercedes E 260, locate the fuse box, which is typically found in the engine compartment or interior cabin. Refer to the owner's manual or repair manual to identify the specific fuse that needs to be replaced. Using a fuse puller or needle-nose pliers, carefully remove the blown fuse and insert a new fuse with the same amperage rating. Ensure the new fuse is securely in place before closing the fuse box cover.
How do I replace a broken side mirror on a Mercedes E 260?
To replace a broken side mirror on a Mercedes E 260, start by locating the mounting bolts or screws that secure the mirror to the door. Remove these fasteners and disconnect any electrical connectors if applicable. Carefully remove the old mirror and install the new one, ensuring it is properly aligned and secured. Reattach any electrical connectors and tighten the mounting bolts or screws. Test the side mirror functions to ensure proper operation.
How do I replace a faulty spark plug in a Mercedes E 260?
To replace a faulty spark plug in a Mercedes E 260, start by disconnecting the negative terminal of the battery. Locate the spark plug wires or ignition coils and remove them carefully. Use a spark plug socket and extension to remove the old spark plug. Install a new spark plug, ensuring it is tightened to the recommended torque. Reinstall the spark plug wires or ignition coils, reconnect the battery, and test the engine for proper ignition.
How do I replace a headlight bulb in a Mercedes E 260?
To replace a headlight bulb in a Mercedes E 260, start by opening the hood and locating the back of the headlight assembly. Disconnect the electrical connector from the bulb and remove any retaining clips or covers. Carefully remove the old bulb and replace it with a new one, ensuring it is securely seated. Reattach any clips or covers, reconnect the electrical connector, and test the headlights to ensure proper operation.
How do I replace the brake pads on a Mercedes E 260?
To replace the brake pads on a Mercedes E 260, start by safely raising the vehicle and removing the wheels. Locate the brake caliper and remove the retaining bolts to access the brake pads. Take note of the orientation of the old pads and replace them with new ones, ensuring they are properly seated. Reinstall the caliper, tighten the retaining bolts, and repeat the process for other wheels. Finally, pump the brake pedal a few times to ensure proper brake pad positioning before driving.
How do I replace the cabin air filter in a Mercedes E 260?
To replace the cabin air filter in a Mercedes E 260, locate the cabin air filter housing, which is usually located behind the glove compartment or under the dashboard. Remove any retaining clips or screws to access the filter housing. Take note of the orientation of the old filter and replace it with a new one, ensuring it is properly seated. Reinstall the housing cover and any retaining clips or screws, and test the HVAC system to ensure proper airflow.
How do I reset the service indicator in a Mercedes E 260?
To reset the service indicator in a Mercedes E 260, start by turning the ignition to the ON position without starting the engine. Use the steering wheel buttons to navigate the instrument cluster menu until you reach the service indicator display. From there, follow the instructions in the owner's manual or repair manual to reset the service indicator. It is important to perform this reset after completing any scheduled maintenance to ensure accurate service reminders.
How often should I change the air filter in a Mercedes E 260?
It is generally recommended to change the air filter in a Mercedes E 260 every 15,000 to 30,000 miles or as specified in the owner's manual. However, if you frequently drive in dusty or polluted environments, it may be necessary to replace the air filter more frequently. A clogged or dirty air filter can restrict airflow to the engine, leading to reduced performance and fuel efficiency.
What is the recommended tire pressure for a Mercedes E 260?
The recommended tire pressure for a Mercedes E 260 can vary depending on factors such as load, driving conditions, and tire size. It is important to refer to the placard located in the driver's door jamb or the owner's manual for the specific tire pressure recommendations. Maintaining the correct tire pressure is essential for safety, fuel efficiency, and tire longevity.
What should I do if the Mercedes E 260 exhibits abnormal engine noise?
If your Mercedes E 260 exhibits abnormal engine noise, it is important to investigate the source of the noise. Check for any loose components, such as belts or pulleys, and inspect the engine for any signs of leaks or damage. It is advisable to consult the repair manual for specific troubleshooting steps related to the engine noise. If the issue persists or worsens, it is recommended to seek assistance from a qualified technician for further diagnosis and repair.
What should I do if the Mercedes E 260 experiences a starting issue?
If your Mercedes E 260 is experiencing starting issues, first check the battery for any signs of corrosion or low charge. If the battery is in good condition, inspect the starter motor and ignition system for any faults. It is advisable to consult the repair manual for specific troubleshooting steps and diagnostics. If the issue persists, it is recommended to seek assistance from a qualified technician to properly diagnose and resolve the starting problem.
What type of coolant should I use in a Mercedes E 260?
In a Mercedes E 260, it is recommended to use a coolant that meets the specifications outlined in the owner's manual or repair manual. Typically, this would be a coolant with a mix of ethylene glycol and water in a specific ratio, depending on the climate. It is important to use the correct coolant to ensure proper cooling system performance and prevent any potential damage to the engine.
Get notified for new manuals?
We'll send you a quick email when a new Mercedes E 260 manual is added.