Mercedes E 280 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Mercedes E 280

The Mercedes-Benz E-Class is a range of executive cars manufactured by Mercedes-Benz in various engine and body configurations produced since 1992. The Mercedes-Benz E 280 was produced in several versions since 1993. It was manufactured as 4-door sedan from 1993 until 2002 and then again from 2006 until 2009. It was also manufactured as 5-door combi wagon from 1993 until 2009. This model is manufactured with both petrol and diesel engines, and both manual and automatic transmission styles are available. Its top speed is listed as 230 km/h and can accelerate from 0 to 100 km/h in 9.1 seconds.

Mercedes E 280 FAQ's

How can I troubleshoot a non-starting issue in my Mercedes E 280?

If your Mercedes E 280 does not start, there are a few potential causes to consider. Check the battery to ensure it has sufficient charge, inspect the fuses related to the starting system, and verify that the transmission is in Park or Neutral. If these basic checks do not resolve the issue, it is recommended to consult the vehicle's repair manual for further troubleshooting steps or contact a qualified mechanic for assistance.

How do I check the transmission fluid level in my Mercedes E 280?

To check the transmission fluid level in your Mercedes E 280, start the engine and allow it to reach operating temperature. Park the vehicle on a level surface, engage the parking brake, and shift through all gears before returning to Park. Locate the transmission dipstick, remove it, wipe it clean, reinsert it, and then remove it again to check the fluid level. The fluid level should be within the designated range on the dipstick.

How do I perform a basic engine tune-up on my Mercedes E 280?

Performing a basic engine tune-up on your Mercedes E 280 involves several key steps. These include replacing spark plugs, inspecting and replacing ignition wires if necessary, checking and adjusting ignition timing, inspecting and replacing the air filter, and performing a fuel system cleaning. Following the manufacturer's recommended maintenance schedule and consulting the repair manual for specific instructions will help ensure optimal engine performance.

How do I replace a burnt-out headlight bulb in my Mercedes E 280?

To replace a burnt-out headlight bulb in your Mercedes E 280, open the hood and locate the back of the headlight assembly. Gently disconnect the power connector from the bulb, then twist and remove the bulb holder. Replace the old bulb with a new one, ensuring it is securely in place, and reconnect the power connector. Test the headlight to ensure it is functioning properly before closing the hood.

How do I replace a faulty oxygen sensor in my Mercedes E 280?

To replace a faulty oxygen sensor in your Mercedes E 280, locate the sensor(s) in the exhaust system. Disconnect the electrical connector, remove the sensor using an appropriate wrench or socket, and replace it with a new one. Ensure the new sensor is tightened to the specified torque and reconnect the electrical connector. Clear any stored fault codes using a diagnostic tool and test the vehicle to verify proper operation.

How do I replace a malfunctioning power window motor in my Mercedes E 280?

To replace a malfunctioning power window motor in your Mercedes E 280, remove the door panel to gain access to the motor. Disconnect the electrical connector and remove the mounting bolts securing the motor. Replace the old motor with a new one, ensuring proper alignment, and secure it with the mounting bolts. Reconnect the electrical connector and test the window operation before reinstalling the door panel.

How do I replace the cabin air filter in my Mercedes E 280?

To replace the cabin air filter in your Mercedes E 280, locate the filter housing, usually located behind the glove compartment or under the dashboard. Open the housing cover and remove the old filter by gently sliding it out. Install the new filter in the correct orientation, ensuring it fits securely. Close the housing cover and test the air conditioning and ventilation system to ensure proper airflow.

How do I reset the anti-theft system on my Mercedes E 280?

To reset the anti-theft system on your Mercedes E 280, lock all the doors and close them. Use the key to manually lock and unlock the driver's door, then turn the ignition to the "ON" position without starting the engine. The anti-theft system should reset, and you can then start the vehicle normally. If the problem persists, consult the vehicle's repair manual or contact a qualified technician for further assistance.

How do I reset the maintenance light on my Mercedes E 280?

To reset the maintenance light on your Mercedes E 280, turn the ignition to position 1 (but do not start the engine). Use the arrow buttons on the multifunction steering wheel to navigate to the "Service" menu. Select "Reset Service" and confirm the reset. The maintenance light should be reset, indicating that the service interval has been successfully acknowledged.

How do I reset the tire pressure monitoring system on my Mercedes E 280?

To reset the tire pressure monitoring system (TPMS) on your Mercedes E 280, ensure all tires are properly inflated to the recommended pressure. Turn the ignition to position 1 (but do not start the engine) and navigate to the "Vehicle" menu on the multifunction display. Select "Tire Pressure Monitor" and then choose "Calibrate." Follow the prompts on the display to complete the TPMS reset process.

How do I troubleshoot an overheating issue in my Mercedes E 280?

If your Mercedes E 280 is experiencing overheating issues, there are a few potential causes to investigate. Check the coolant level and ensure it is at the proper level. Inspect the radiator and cooling system for any leaks or blockages. Verify that the cooling fan is functioning correctly and that the thermostat is opening and closing properly. If the issue persists, it is advisable to consult the vehicle's repair manual or seek professional assistance.

How often should I change the engine oil in my Mercedes E 280?

It is recommended to change the engine oil in your Mercedes E 280 every 10,000 miles or once a year, whichever comes first. Regular oil changes help maintain optimal engine performance and prolong the life of your vehicle. Following the manufacturer's recommended oil change intervals ensures proper lubrication and reduces the risk of engine damage.

How often should I replace the brake pads in my Mercedes E 280?

The frequency of brake pad replacement in your Mercedes E 280 depends on various factors, including driving habits, road conditions, and overall vehicle usage. As a general guideline, it is recommended to inspect the brake pads every 10,000 miles and replace them if they have less than 3mm of friction material remaining. Regular brake inspections and maintenance help ensure optimal braking performance and safety.

What is the recommended tire pressure for my Mercedes E 280?

The recommended tire pressure for your Mercedes E 280 can be found in the vehicle's owner's manual or on a sticker located on the driver's side door jamb. It is important to maintain the recommended tire pressure, as it ensures proper handling, fuel efficiency, and tire longevity. Check the tire pressure regularly, especially before long trips or when carrying heavy loads.

What type of engine oil should I use for my Mercedes E 280?

Your Mercedes E 280 requires a synthetic motor oil that meets the specifications outlined in the vehicle's owner's manual. Typically, a 5W-30 or 0W-40 viscosity grade oil is recommended. Using the correct type and grade of engine oil ensures proper lubrication, protects engine components, and maintains optimal performance.

Mercedes E 280 Manuals Index

Mercedes E 280 Workshop Manual

Mercedes E 280 Owners Manual

Related Models

Mercedes E 280 on Amazon

Mercedes-Benz E-Class Diesel Workshop Manual: Powered by 4, 5 and 6 Cyl. CDI Engines W210 Series 1999-2006