Mercedes G 280 Workshop Manuals and Repair Manuals

To change a flat tire on your Mercedes G 280, first, find a safe location to park the vehicle and engage the parking brake. Locate the spare tire, jack, and lug wrench, which are usually stored in the trunk. Follow the step-by-step instructions for raising the vehicle, removing the damaged tire, and installing the spare tire. It is advisable to consult the owner's manual for detailed instructions and safety precautions specific to your vehicle.

To change the cabin air filter in your Mercedes G 280, locate the cabin air filter housing, which is typically located behind the glove compartment or under the dashboard. Remove the housing cover, take out the old filter, and replace it with a new one. Ensure the filter is properly seated and reinstall the housing cover. Consult the owner's manual for specific instructions and precautions.

To check the engine oil level in your Mercedes G 280, park the vehicle on a level surface and ensure the engine is turned off and cool. Locate the engine oil dipstick, usually colored yellow or orange, and remove it from the engine. Wipe the dipstick clean, reinsert it fully, then remove it again to check the oil level. The oil level should be between the minimum and maximum marks on the dipstick. It is recommended to consult the owner's manual for precise instructions and illustrations.

To jump-start your Mercedes G 280, first, locate the battery, which is typically located in the engine compartment. Connect the positive (+) terminal of the dead battery to the positive terminal of the donor vehicle's battery using a jumper cable. Then, connect the negative (-) terminal of the donor vehicle's battery to a metal ground point on your Mercedes G 280, such as an unpainted bolt. Start the donor vehicle and let it run for a few minutes while attempting to start your Mercedes. Once started, disconnect the jumper cables in reverse order. It is advisable to consult the owner's manual for detailed instructions and precautions specific to your vehicle.

To reset the maintenance light on your Mercedes G 280, locate the instrument cluster and use the buttons on the steering wheel to navigate to the vehicle settings menu. From there, find the maintenance or service submenu and select the option to reset the indicator. Follow the prompts on the screen to complete the reset process. It is recommended to consult the owner's manual for detailed instructions specific to your vehicle.

It is recommended to change the engine oil in your Mercedes G 280 every 7,500 miles or once a year, whichever comes first. Regular oil changes help maintain optimal engine performance and prolong the life of your vehicle. Neglecting to change the oil on time can lead to increased engine wear and potential damage.

The air filter in your Mercedes G 280 should be replaced every 30,000 miles or as indicated by the maintenance schedule. A clean air filter promotes efficient engine combustion and protects the engine from harmful contaminants. Neglecting to replace the air filter on time can lead to reduced fuel efficiency and potential damage to the engine.

The brake pads on your Mercedes G 280 should be inspected regularly, and replacement is typically necessary every 30,000 to 50,000 miles, depending on driving conditions and driving style. It is crucial to monitor the thickness of the brake pads and replace them before they become too worn out, as worn pads can compromise braking performance and safety. Always follow the maintenance schedule outlined in the owner's manual.

The spark plugs in your Mercedes G 280 should be replaced every 60,000 miles or as indicated by the maintenance schedule. Fresh spark plugs ensure proper ignition and combustion, maximizing engine performance and fuel efficiency. Delaying spark plug replacement can lead to misfires, reduced power, and increased fuel consumption.

The transmission fluid in your Mercedes G 280 should be replaced every 40,000 to 60,000 miles, depending on the driving conditions and maintenance schedule. Regular transmission fluid changes help maintain smooth gear shifting and prevent premature transmission wear. Neglecting to replace the transmission fluid on time can lead to transmission malfunctions and costly repairs.

It is recommended to rotate the tires on your Mercedes G 280 every 5,000 to 7,500 miles or as indicated by the maintenance schedule. Regular tire rotation helps ensure even tread wear and extends the life of the tires. Follow the recommended rotation pattern specified in the owner's manual to maintain optimal handling and traction.

The recommended coolant for your Mercedes G 280 is a mixture of ethylene glycol-based antifreeze and distilled water in a 50:50 ratio. This coolant mixture provides proper protection against freezing and overheating. It is crucial to use the correct coolant type and maintain the proper coolant level to prevent engine damage and ensure optimal cooling system performance.

The recommended tire pressure for your Mercedes G 280 can be found in the owner's manual or on a sticker located on the driver's side door jamb. It is important to maintain the correct tire pressure as specified by the manufacturer to ensure optimal handling, fuel efficiency, and tire life. Regularly check and adjust the tire pressure according to the recommended specifications.

The towing capacity of your Mercedes G 280 is typically around 6,600 pounds, but it may vary depending on the specific model and configuration. It is important to consult the owner's manual or contact a certified Mercedes-Benz dealer to obtain the exact towing capacity for your vehicle. Exceeding the recommended towing capacity can result in damage to the vehicle and compromise safety.

Your Mercedes G 280 requires premium unleaded gasoline with an octane rating of at least 91. Using lower octane fuel can result in reduced engine performance and potentially cause engine knocking. It is important to adhere to the manufacturer's recommendation for fuel type to ensure proper functioning of your vehicle.