Mercedes G 350 Workshop Manuals and Repair Manuals

To reset the service indicator on your Mercedes G 350, follow these steps: 1. Turn the ignition on without starting the engine. 2. Use the arrow buttons on the steering wheel to navigate to the "Service" menu. 3. Select "Reset" and confirm the reset. The service indicator should now be reset. Resetting the service indicator ensures accurate maintenance tracking and keeps you informed about the next service interval.

To check the battery condition in a Mercedes G 350, use a voltmeter or a battery tester to measure the voltage across the battery terminals. A fully charged battery should have a voltage reading of around 12.6 volts or higher. If the voltage is significantly lower, it may indicate a weak or discharged battery that needs to be recharged or replaced. Regularly checking the battery condition helps prevent unexpected battery failures and ensures reliable starting of the vehicle.

To check the tire pressure in your Mercedes G 350, start by ensuring the tires are cold. Remove the valve cap of each tire and use a tire pressure gauge to measure the pressure. Compare the measured pressure to the recommended range specified in the owner's manual. If the pressure is too low, add air until it reaches the correct level. Proper tire pressure is essential for safe driving, even tire wear, and optimal fuel efficiency.

To jump-start a Mercedes G 350, follow these steps: 1. Park a running vehicle close to the G 350 and turn off both engines. 2. Connect the positive (red) jumper cable to the positive terminal of the G 350's battery and the positive terminal of the other vehicle's battery. 3. Connect the negative (black) jumper cable to the negative terminal of the other vehicle's battery and a grounded metal surface on the G 350 (e.g., an unpainted bolt). Start the engine of the other vehicle and let it run for a few minutes, then start the G 350. Jump-starting should be done carefully to avoid damaging the electrical system of the vehicles involved.

To program a new key for a Mercedes G 350, insert the existing key into the ignition and turn it to position 2 (on) for about 5 seconds. Remove the key and immediately insert the new key, turning it to position 2 within 30 seconds. Leave the new key in position 2 for about 30 seconds, and then turn it off. The new key should now be programmed and ready for use. Proper key programming ensures secure access and starting of the vehicle.

To replace a headlight bulb in a Mercedes G 350, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector and remove the retaining clip or cover. Carefully remove the old bulb and replace it with a new one, ensuring it is securely seated. Reconnect the electrical connector and test the headlight before closing the hood. Proper headlight bulb replacement ensures optimal visibility and safety while driving.

To replace a windshield wiper blade on a Mercedes G 350, lift the wiper arm away from the windshield and locate the release tab or button near the wiper blade assembly. Press or slide the tab/button to release the old wiper blade, then slide the new wiper blade into place until it clicks securely. Gently lower the wiper arm back onto the windshield. Proper windshield wiper blade replacement ensures clear visibility during inclement weather.

It is recommended to change the oil in your Mercedes G 350 every 10,000 miles or once a year, whichever comes first. Regular oil changes are crucial to maintain the engine's performance and prolong its lifespan. Neglecting to change the oil regularly can result in reduced engine efficiency and potential damage.

The air filter in a Mercedes G 350 should be replaced approximately every 30,000 miles or as recommended in the owner's manual. However, in dusty or polluted environments, it may require more frequent replacement. A clogged or dirty air filter can restrict airflow to the engine, leading to reduced performance and fuel efficiency. Regular air filter replacement promotes better engine efficiency and helps prevent dirt and debris from entering the engine.

The frequency of brake pad replacement on a Mercedes G 350 can vary depending on driving habits and conditions, but it is generally recommended to inspect the brake pads every 20,000 miles. If the brake pads are worn close to the minimum thickness specified in the owner's manual or if there are any signs of uneven wear or damage, they should be replaced promptly. Timely brake pad replacement is crucial for safe braking performance and to prevent further damage to the braking system.

The cabin air filter in a Mercedes G 350 should be replaced approximately every 15,000 miles or as recommended in the owner's manual. However, in dusty or polluted environments, it may require more frequent replacement. A clogged or dirty cabin air filter can reduce the effectiveness of the HVAC system and compromise indoor air quality. Regular cabin air filter replacement ensures proper airflow and helps keep the cabin clean and odor-free.

The recommended coolant for the Mercedes G 350 is an ethylene glycol-based coolant with a mixture of 50% coolant and 50% distilled water. It is important to use coolant that meets the specifications outlined in the owner's manual to maintain proper engine cooling and prevent overheating. Regularly checking and maintaining the coolant level is essential for the longevity and performance of the engine.

The recommended tire pressure for the Mercedes G 350 can vary depending on the specific model and tire size. It is important to refer to the placard located on the driver's door jamb or the owner's manual for the correct tire pressure specifications. Proper tire pressure ensures optimal handling, tire longevity, and fuel efficiency.

The recommended transmission fluid for the Mercedes G 350 is a synthetic automatic transmission fluid (ATF) that meets the specifications outlined in the owner's manual. It is important to use the correct fluid to maintain proper transmission operation, lubrication, and cooling. Regularly checking and maintaining the transmission fluid level is crucial for smooth gear shifts and prolonging the lifespan of the transmission.

The recommended oil for the Mercedes G 350 is a fully synthetic oil with a viscosity grade of 0W-40 or 5W-40. It is important to use oil that meets the specifications outlined in the owner's manual to ensure optimal engine performance and protection. Using the correct oil will help maintain fuel efficiency, reduce wear and tear, and provide better overall engine performance.