Mercedes SL 300 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Mercedes SL 300
The Mercedes-Benz SL-Class (formerly known as the SL Roadster) is a grand tourer manufactured by Mercedes since 1954. The term SL-Class refers to the marketing variations of the vehicle, including the numerous engine configurations spanning six design generations. Mercedes SL 300 was manufactured as a 2 door cabriolet between 2009 and 2012. It was manufactured with 2,996 cc petrol engines. This model was produced with automatic transmission style. This model has top speed listed as 250km/h, and can accelerate from 0 to 100 km/h in 7.8 seconds.Mercedes SL 300 FAQ's
How do I change a headlight bulb in a Mercedes SL 300?
To change a headlight bulb in a Mercedes SL 300, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector from the bulb, then twist and remove the bulb holder. Replace the old bulb with a new one, making sure not to touch the glass part of the bulb. Reinstall the bulb holder, reconnect the electrical connector, and test the headlights before closing the hood.
How do I change the oil in a Mercedes SL 300?
To change the oil in a Mercedes SL 300, you will need to locate the oil drain plug underneath the engine and remove it, allowing the old oil to drain completely. Then, replace the drain plug and remove the oil filter using an oil filter wrench. Finally, install a new oil filter and refill the engine with the recommended amount and type of oil, as specified in the owner's manual.
How do I check the engine oil level in a Mercedes SL 300?
To check the engine oil level in a Mercedes SL 300, park the vehicle on a level surface and wait for the engine to cool down. Open the hood and locate the engine oil dipstick. Remove the dipstick, wipe it clean, reinsert it fully, and then remove it again to check the oil level. The oil level should be between the minimum and maximum marks on the dipstick. If the level is low, add the recommended oil as specified in the owner's manual.
How do I check the transmission fluid level in a Mercedes SL 300?
To check the transmission fluid level in a Mercedes SL 300, start the engine and let it reach operating temperature. Locate the transmission dipstick, usually labeled with a yellow handle, and remove it. Wipe the dipstick clean, reinsert it, and then remove it again to check the fluid level. The correct fluid level should be within the designated range on the dipstick. If the level is low, add the recommended transmission fluid through the dipstick tube.
How do I replace a battery in a Mercedes SL 300?
To replace the battery in a Mercedes SL 300, start by locating the battery in the engine bay or trunk. Disconnect the negative terminal first, followed by the positive terminal. Remove any retaining brackets or covers, then lift out the old battery. Install the new battery, ensuring proper polarity, and reconnect the positive terminal followed by the negative terminal. Test the battery to ensure proper installation and functionality.
How do I replace a fuse in a Mercedes SL 300?
To replace a fuse in a Mercedes SL 300, locate the fuse box, usually found in the engine bay or the interior of the vehicle. Consult the fuse box diagram in the owner's manual to identify the fuse that needs to be replaced. Using a fuse puller or needle-nose pliers, gently remove the faulty fuse and replace it with a new one of the same amperage rating. Ensure the new fuse is securely in place and test the corresponding electrical component to verify proper functionality.
How do I replace a windshield wiper blade on a Mercedes SL 300?
To replace a windshield wiper blade on a Mercedes SL 300, lift the wiper arm away from the windshield and locate the release tab on the wiper blade assembly. Press the release tab and slide the old blade off the wiper arm. Align the new wiper blade with the wiper arm and slide it in until it clicks into place. Lower the wiper arm back onto the windshield and repeat the process for the other wiper blade.
How do I reset the electronic stability program (ESP) in a Mercedes SL 300?
To reset the electronic stability program (ESP) in a Mercedes SL 300, start the engine and turn the steering wheel fully to the left, then fully to the right. Straighten the steering wheel and drive the vehicle for a short distance at a moderate speed. This should recalibrate the ESP system. If the ESP warning light persists or there are other issues, consult the owner's manual or a certified mechanic for further assistance.
How do I reset the service light on a Mercedes SL 300?
To reset the service light on a Mercedes SL 300, turn the ignition key to position 1 (but do not start the engine). Press and hold the trip reset button located on the instrument cluster until the service light resets. If this method does not work, consult the owner's manual or a certified mechanic for alternative procedures.
How do I reset the tire pressure monitoring system in a Mercedes SL 300?
To reset the tire pressure monitoring system in a Mercedes SL 300, start the engine and locate the menu button on the instrument cluster. Press the menu button until you see the tire pressure monitoring system screen. Select the reset option and follow the prompts on the display to reset the system. Refer to the owner's manual for specific instructions or consult a certified mechanic if needed.
How often should I change the brake pads on a Mercedes SL 300?
The frequency of brake pad replacement on a Mercedes SL 300 depends on various factors such as driving habits, road conditions, and the type of brake pads used. However, as a general guideline, brake pads should be inspected regularly and replaced when the thickness is less than 3mm. It is recommended to consult the owner's manual or a certified mechanic for specific recommendations based on your driving conditions.
What are the recommended tire pressure levels for a Mercedes SL 300?
The recommended tire pressure levels for a Mercedes SL 300 can be found in the owner's manual or on a sticker located on the driver's side door jamb. It is important to maintain the recommended tire pressure for optimal performance, fuel efficiency, and tire longevity. Regularly check the tire pressure with a reliable tire pressure gauge and adjust it as needed.
What is the recommended interval for changing the spark plugs in a Mercedes SL 300?
The recommended interval for changing the spark plugs in a Mercedes SL 300 can vary depending on the specific model and engine type. However, as a general guideline, it is often recommended to replace spark plugs every 30,000 to 50,000 miles. Consult the owner's manual or a certified mechanic for the specific interval and type of spark plugs recommended for your vehicle.
What is the recommended interval for replacing the air filter in a Mercedes SL 300?
The recommended interval for replacing the air filter in a Mercedes SL 300 can vary depending on driving conditions. However, as a general guideline, it is recommended to inspect the air filter every 12,000 to 15,000 miles and replace it if it appears dirty or clogged. Regular air filter maintenance is important to ensure proper airflow to the engine and maintain optimal performance.
What type of coolant should I use in a Mercedes SL 300?
The recommended coolant for a Mercedes SL 300 is specified in the owner's manual. Generally, Mercedes vehicles require a specific type of coolant, such as Mercedes-Benz Genuine Antifreeze/Coolant (MB 325.0). It is crucial to use the correct coolant to ensure optimal engine performance and prevent potential damage.
Mercedes SL 300 Manuals Index
Mercedes SL 300 on Amazon
Mercedes SL 300 Workshop Manual
-
- Mercedes SL 300 1990 1993 Workshop Manual
- (331 Pages)
- (Free)
Mercedes SL 300 Owners Manual
-
- Mercedes SL 300 Owners Manual
- (151 Pages)
- (Free)
Related Models
