Mitsubishi Electric Vehicle (i-MiEV) Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Mitsubishi Electric Vehicle (i-MiEV)
The Mitsubishi i-MiEV (MiEV is an acronym for Mitsubishi innovative Electric Vehicle) is a five-door hatchback electric car produced by Mitsubishi Motors, and is the electric version of the Mitsubishi i. Rebadged variants of the i-MiEV are also sold in Europe by PSA Peugeot Citroën (PSA) as the Peugeot iOn and Citroën C-Zero. The i-MiEV is the world's first modern highway-capable mass production electric car. The i-MiEV was launched for fleet customers in Japan in July 2009, and on April 1, 2010, for the wider public. According to the manufacturer, the i-MiEV all-electric range is 160 kilometres (100 mi) on the Japanese test cycle. The range for the 2012 model year American version is 62 miles (100 km) on the United States Environmental Protection Agency's (US EPA) cycle. Global sales totaled over 50,000 units since 2009.Mitsubishi Electric Vehicle (i-MiEV) FAQ's
How can I diagnose a charging system problem in the Mitsubishi Electric Vehicle (i-MiEV)?
To diagnose a charging system problem, start by inspecting the charging cable and connector for any physical damage or loose connections. Next, use a multimeter to measure the voltage at the charging port. If the voltage is below the recommended range, check the fuse, relay, and wiring connections related to the charging system. The repair manual provides detailed instructions for diagnosing and repairing charging system issues.
How can I replace a malfunctioning door lock actuator in the Mitsubishi Electric Vehicle (i-MiEV)?
To replace a malfunctioning door lock actuator in the i-MiEV, start by removing the interior door panel to access the actuator. Disconnect the electrical connector and remove any mounting screws or clips securing the actuator. Install the new actuator, reconnect the electrical connector, and test the door lock operation. Ensure all components are properly aligned and secured before reattaching the door panel. The repair manual provides step-by-step instructions and diagrams for this procedure.
How can I troubleshoot a malfunctioning power window in the Mitsubishi Electric Vehicle (i-MiEV)?
If a power window in the i-MiEV is not operating correctly, first check the fuse related to the power windows in the fuse box. If the fuse is intact, inspect the window switch and wiring for any visible damage or loose connections. If no issues are found, it may be necessary to replace the power window motor or regulator. The repair manual provides detailed instructions and diagrams for diagnosing and repairing power window problems.
How do I check the battery voltage of the Mitsubishi Electric Vehicle (i-MiEV)?
To check the battery voltage, locate the battery terminals under the hood and use a multimeter to measure the voltage. Ensure the vehicle is turned off and the ignition key is removed before performing this test. Comparing the measured voltage against the recommended voltage range specified in the repair manual will help determine the battery's health.
How do I perform a brake fluid flush in the Mitsubishi Electric Vehicle (i-MiEV)?
Performing a brake fluid flush in the i-MiEV requires specific tools and equipment, as well as proper safety precautions. Start by raising the vehicle and supporting it securely on jack stands. Locate the brake fluid reservoir and connect a brake bleeding kit. Follow the recommended bleeding procedure outlined in the repair manual, which typically involves opening the bleeder valve at each wheel and flushing the old fluid with fresh brake fluid until clear fluid is observed.
How do I replace a headlight bulb in the Mitsubishi Electric Vehicle (i-MiEV)?
To replace a headlight bulb in the i-MiEV, start by turning off the vehicle and ensuring the headlights are not hot to avoid burns. Open the hood and locate the back of the headlight assembly. Disconnect the electrical connector, remove the retaining clip or screws holding the bulb in place, and carefully pull out the old bulb. Insert the new bulb, secure it with the retaining clip or screws, reconnect the electrical connector, and test the headlight operation.
How do I replace a malfunctioning windshield wiper blade in the Mitsubishi Electric Vehicle (i-MiEV)?
To replace a malfunctioning windshield wiper blade in the i-MiEV, lift the wiper arm away from the windshield and locate the release mechanism on the blade. Depress the release mechanism and slide the old blade off the wiper arm. Align the new wiper blade with the arm and secure it in place by pressing until it clicks. Gently lower the wiper arm back onto the windshield. The repair manual provides specific instructions and illustrations for this procedure.
How do I reset the tire pressure monitoring system (TPMS) in the Mitsubishi Electric Vehicle (i-MiEV)?
To reset the TPMS in the i-MiEV, ensure all tires are properly inflated to the recommended pressure. Then, locate the TPMS reset button, typically found under the dashboard or inside the glove compartment. Press and hold the button until the TPMS indicator light blinks, indicating a successful reset. The repair manual provides detailed instructions and illustrations to assist with this process.
How often should I replace the cabin air filter in the Mitsubishi Electric Vehicle (i-MiEV)?
The cabin air filter in the i-MiEV should be replaced approximately once a year or every 12,000 miles, whichever comes first. However, if you frequently drive in dusty or polluted environments, it may be necessary to replace it more frequently. Regularly replacing the cabin air filter helps maintain good air quality inside the vehicle and prevents dust and debris from entering the HVAC system.
What is the recommended maintenance schedule for the Mitsubishi Electric Vehicle (i-MiEV)?
The recommended maintenance schedule for the i-MiEV typically includes regular service intervals for items such as oil changes, tire rotations, brake inspections, and filter replacements. It is important to follow the manufacturer's guidelines outlined in the repair manual to ensure the optimal performance and longevity of your vehicle. Adhering to the recommended maintenance schedule will also help maintain any applicable warranty coverage.
What is the recommended tire pressure for the Mitsubishi Electric Vehicle (i-MiEV)?
The recommended tire pressure for the i-MiEV is typically specified on a sticker located on the driver's side door jamb or in the owner's manual. It is important to maintain the correct tire pressure to ensure optimal handling, tire longevity, and energy efficiency. Refer to the repair manual for additional information on tire maintenance and proper inflation techniques.
What should I do if the air conditioning system in the Mitsubishi Electric Vehicle (i-MiEV) is not cooling properly?
If the air conditioning system in the i-MiEV is not cooling properly, check the cabin air filter for any obstruction or dirt buildup. If the filter is clean, inspect the refrigerant level and check for any visible leaks in the system. It may be necessary to recharge the A/C system or repair any identified leaks. The repair manual provides detailed instructions on diagnosing and repairing A/C system issues.
What should I do if the Mitsubishi Electric Vehicle (i-MiEV) doesn't start?
If your i-MiEV fails to start, first check the battery charge level and ensure it is above the recommended threshold. If the battery charge is sufficient, inspect the electrical connections, such as the terminals and cables, for any signs of corrosion or damage. If the issue persists, refer to the repair manual for further troubleshooting steps, including checking the starter motor and ignition system.
What should I do if the Mitsubishi Electric Vehicle (i-MiEV) experiences a loss of power while driving?
If the i-MiEV experiences a sudden loss of power while driving, first check the battery charge level to ensure it is not depleted. If the battery charge is sufficient, inspect the high-voltage wiring and connections for any signs of damage or loose connections. It may be necessary to perform a diagnostic scan using specialized equipment to identify any fault codes or issues with the electric drivetrain. The repair manual provides detailed instructions for troubleshooting power loss situations.
What type of coolant should I use in the Mitsubishi Electric Vehicle (i-MiEV)?
The i-MiEV uses a specific type of coolant that is recommended by Mitsubishi. It is important to use the correct coolant to ensure proper cooling system performance and prevent potential damage. Refer to the repair manual or consult with a Mitsubishi authorized service center to determine the exact coolant specification and brand suitable for your i-MiEV.
Mitsubishi Electric Vehicle (i-MiEV) Manuals Index
Mitsubishi Electric Vehicle (i-MiEV) Owners Manual
- (Free)
- (Free)
- (Free)
Mitsubishi Electric Vehicle (i-MiEV) Misc Document
- (Free)
Related Models
