Mitsubishi FTO Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Mitsubishi FTO

The Mitsubishi FTO is a front engine, front-wheel drive coupe produced by Mitsubishi Motors between 1994 and 2000. It was originally planned to be exclusively for the Japanese domestic market, although its popularity as a grey market import to the United Kingdom, Ireland, and New Zealand led to eventual limited distribution through Mitsubishi's official dealers in those countries. Upon its debut it won the Car of the Year Japan award for 1994–95. In Japan, it was sold at a specific retail chain called Car Plaza. FTO stands for "Fresh Touring Origination”. The name recalls the Galant FTO coupé of 1971, one of the company's first sports cars. Prior to the arrival of the 1994 front-wheel drive FTO, which inherited the 'FTO' tag, was the Mitsubishi Galant Coupé FTO. A rear-wheel drive coupe produced by Japanese automaker Mitsubishi Motors from November 1971 to March 1975."FTO" was meant to stand for Fresco Turismo Omologato, in a fine example of Japanese Italian (or 'Fresh Touring Origination' in English). This compact Coupé FTO can effectively be seen as a replacement for the earlier Mitsubishi Colt 11-F Super Sports.

Mitsubishi FTO FAQ's

How do I adjust the headlights on my Mitsubishi FTO?

To adjust the headlights on your Mitsubishi FTO, park the vehicle on a level surface facing a wall or garage door. Measure the distance between the ground and the center of each headlight, ensuring it is equal on both sides. Mark a horizontal reference line on the wall at the same height as the headlights. Locate the vertical and horizontal adjustment screws on the back of each headlight assembly. Use a screwdriver to adjust the screws and align the headlight beams with the reference line. Test the headlights on a dark road to ensure proper visibility without blinding other drivers.

How do I change the oil in my Mitsubishi FTO?

To change the oil in your Mitsubishi FTO, locate the oil drain plug underneath the engine and remove it with a wrench. Allow the old oil to drain completely, then replace the drain plug. Next, remove the oil filter and replace it with a new one. Finally, refill the engine with the recommended amount and type of oil specified in the owner's manual.

How do I check the tire pressure on my Mitsubishi FTO?

To check the tire pressure on your Mitsubishi FTO, first, ensure the tires are cold (not driven for at least a few hours). Locate the tire valve stem and remove the valve cap. Use a tire pressure gauge to measure the pressure by firmly pressing it onto the valve stem. Compare the reading to the recommended tire pressure listed in the owner's manual or a sticker on the driver's side door jamb. If needed, add or release air accordingly. Repeat the process for all tires, including the spare.

How do I check the transmission fluid level on my Mitsubishi FTO?

To check the transmission fluid level on your Mitsubishi FTO, start the engine and let it idle for a few minutes to warm up. Locate the transmission dipstick, which is usually labeled and located near the back of the engine bay. Remove the dipstick, wipe it clean, then reinsert it fully. Remove the dipstick again and check the fluid level. The fluid should be within the designated range marked on the dipstick. If needed, add or drain fluid as

How do I replace a blown fuse in my Mitsubishi FTO?

To replace a blown fuse in your Mitsubishi FTO, first, locate the fuse box, which is usually located in the engine compartment or under the dashboard. Consult the owner's manual to identify the specific fuse that needs to be replaced. Using a fuse puller or a pair of needle-nose pliers, gently remove the blown fuse and replace it with a new one of the same amperage rating. Make sure to handle the fuses with care and ensure they are properly seated in their slots.

How do I replace a headlight bulb on my Mitsubishi FTO?

To replace a headlight bulb on your Mitsubishi FTO, open the hood and locate the back of the headlight assembly. Depending on the specific model year, you may need to remove a protective cover or unclip a retaining ring. Once access is gained, carefully disconnect the electrical connector from the bulb. Remove the old bulb by twisting it counterclockwise or releasing any clips. Install the new bulb by reversing the steps, ensuring it is properly secured and aligned. Test the headlight to confirm proper operation.

How do I replace a spark plug on my Mitsubishi FTO?

To replace a spark plug on your Mitsubishi FTO, first, ensure the engine is cool. Locate the spark plugs, which are usually attached to the engine cylinder head. Remove the spark plug wire by firmly pulling it straight off the spark plug. Use a spark plug socket and ratchet to loosen and remove the old spark plug. Install the new spark plug by hand-tightening it into the cylinder head, then use the spark plug socket and ratchet to securely tighten it. Finally, reattach the spark plug wire, ensuring it clicks into place. Repeat the process for each spark plug.

How do I replace the air filter in my Mitsubishi FTO?

To replace the air filter in your Mitsubishi FTO, open the hood and locate the air filter housing. Unlatch or unscrew the housing to access the air filter. Remove the old air filter and clean any debris from the housing. Install the new air filter, ensuring it is properly seated and aligned. Close the housing and secure it in place. Regularly replacing the air filter helps maintain optimal engine performance and fuel efficiency.

How do I replace the brake pads on my Mitsubishi FTO?

To replace the brake pads on your Mitsubishi FTO, first, secure the vehicle on a level surface and chock the wheels to prevent any movement. Remove the wheel that needs the brake pad replacement and locate the brake caliper. Use a wrench or socket to remove the bolts holding the caliper in place, then carefully lift the caliper off the rotor. Remove the old brake pads and replace them with the new ones, ensuring proper alignment. Finally, reattach the caliper, tighten the bolts, and repeat the process for the other wheels.

How do I replace the windshield wipers on my Mitsubishi FTO?

To replace the windshield wipers on your Mitsubishi FTO, lift the wiper arm away from the windshield and locate the release mechanism. Depress or push the release mechanism to detach the old wiper blade from the wiper arm. Align the new wiper blade with the wiper arm and slide it into place until it clicks or locks into position. Gently lower the wiper arm back onto the windshield. Repeat the process for the other wiper blade. Regularly replacing the windshield wipers ensures clear visibility during rainy or snowy conditions.

How do I reset the maintenance light on my Mitsubishi FTO?

To reset the maintenance light on your Mitsubishi FTO, turn the ignition switch to the "ON" position without starting the engine. Locate and press the trip meter reset button until the "Maintenance Required" light starts blinking. Release the button, then press and hold it again until the light turns off. Turn off the ignition, and when you restart the vehicle, the maintenance light should no longer be illuminated. It is important to note that resetting the maintenance light does not replace or negate the need for scheduled maintenance.

How often should I replace the timing belt on my Mitsubishi FTO?

The timing belt on your Mitsubishi FTO should be replaced according to the recommended maintenance schedule specified in the owner's manual. Typically, this is around every 60,000 to 100,000 miles, but it is important to consult the manual for the exact interval. Replacing the timing belt at the recommended intervals is crucial to prevent potential engine damage and ensure the proper functioning of the engine's timing system.

What should I do if my Mitsubishi FTO's battery is dead?

If your Mitsubishi FTO's battery is dead, you can jump-start the car using jumper cables and another vehicle with a working battery. Connect the positive (red) jumper cable to the positive terminal of the dead battery, then connect the other end of the positive cable to the positive terminal of the working battery. Next, connect the negative (black) cable to the negative terminal of the working battery and the other end to a metal surface on the engine block of your FTO. Start the working vehicle and let it run for a few minutes, then try starting your FTO. If it starts, remove the jumper cables in the reverse order of connection.

What should I do if my Mitsubishi FTO's engine overheats?

If your Mitsubishi FTO's engine overheats, the first step is to pull over to a safe location and turn off the engine. Allow the engine to cool down before attempting any further actions. Check the coolant level and add coolant if necessary. Inspect the radiator and cooling system for any visible leaks or blockages. If the problem persists, it is recommended to have the vehicle inspected by a qualified mechanic to diagnose and address the underlying cause of the overheating.

What type of coolant should I use for my Mitsubishi FTO?

For your Mitsubishi FTO, it is recommended to use a coolant that meets the specifications outlined in the owner's manual. Typically, this would be an ethylene glycol-based coolant with the appropriate mix of antifreeze and distilled water. It is important to use the correct coolant to ensure proper cooling system performance and prevent potential damage to the engine.

Mitsubishi FTO Manuals Index

Mitsubishi FTO Workshop Manual

Mitsubishi FTO Misc Document

Related Models