Mitsubishi Starion Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Mitsubishi Starion
The Starion is a two-door, turbocharged four-cylinder rear-wheel drive four-seat hatchback sports car that was manufactured and marketed by Mitsubishi for model years 1982 to 1991. Rebadged variants were marketed in North America as the Conquest under the Chrysler, Dodge, and Plymouth names. The Starion is one of the first modern Japanese turbocharged performance automobiles to use electronic fuel injection. A five-speed manual transmission was standard in most models, however, an automatic transmission was sold as an option in some markets. Horsepower varied between 150 197 hp (112 147 kW; 152 200 PS) depending mostly upon the turbocharger that was fitted, the presence of an intercooler, and whether the 8-valve or 12-valve head was used.Mitsubishi Starion FAQ's
How do I change a headlight bulb in a Mitsubishi Starion?
To change a headlight bulb in a Mitsubishi Starion, open the hood and locate the back of the headlight assembly. Disconnect the power connector from the bulb, remove the retaining clip or screws, and carefully pull out the old bulb. Insert the new bulb, secure it with the retaining clip or screws, and reconnect the power connector. It is recommended to consult the owner's manual or a repair guide for the specific steps and precautions.
How do I check and adjust the tire pressure in a Mitsubishi Starion?
To check and adjust the tire pressure in a Mitsubishi Starion, first, ensure that the tires are cool. Use a tire pressure gauge to measure the pressure and compare it to the recommended tire pressure listed in the owner's manual or on the driver's side door jamb. If the pressure is too low, add air until it reaches the recommended level. If it is too high, release some air until it reaches the proper pressure. Repeat this process for all four tires, including the spare tire.
How do I check and refill the coolant in a Mitsubishi Starion?
To check and refill the coolant in a Mitsubishi Starion, first ensure that the engine is cool. Locate the coolant reservoir, usually labeled with a blue cap, and check the coolant level against the markings on the reservoir. If the level is low, add a 50/50 mixture of coolant and distilled water until it reaches the recommended level. It is crucial to use the correct type of coolant recommended by the manufacturer.
How do I check the automatic transmission fluid level in a Mitsubishi Starion?
To check the automatic transmission fluid level in a Mitsubishi Starion, ensure that the vehicle is on a level surface and the engine is running. Locate the transmission dipstick, usually near the back of the engine compartment. Remove the dipstick, wipe it clean, reinsert it, and then remove it again to check the fluid level. The fluid should be within the designated range on the dipstick. If the level is low, add the recommended transmission fluid through the dipstick tube. It is important to use the correct type of transmission fluid specified by the manufacturer.
How do I check the brake fluid level in a Mitsubishi Starion?
To check the brake fluid level in a Mitsubishi Starion, locate the brake fluid reservoir, usually located on the driver's side of the engine compartment. Ensure that the vehicle is on a level surface and the engine is cool. Remove the cap and visually inspect the fluid level, which should be between the minimum and maximum markings. If the level is low, add the recommended brake fluid to bring it to the proper level. It is important to use the correct type of brake fluid specified by the manufacturer.
How do I diagnose and fix an engine misfire in a Mitsubishi Starion?
Diagnosing and fixing an engine misfire in a Mitsubishi Starion can be complex and may require a scan tool and diagnostic procedures. Start by checking for any obvious issues such as loose or damaged spark plug wires, ignition coils, or vacuum leaks. If no visible issues are found, it is recommended to consult a qualified mechanic or refer to the repair manual for detailed troubleshooting steps, which may involve checking fuel injectors, compression, and ignition system components. Proper diagnosis and repair are essential to restore engine performance and prevent further damage.
How do I jump-start a Mitsubishi Starion?
To jump-start a Mitsubishi Starion, park the assisting vehicle close enough so that the jumper cables can reach both vehicle batteries but ensure they are not touching each other. Connect the positive (+) cable to the positive terminal of the dead battery, then connect the other end of the positive cable to the positive terminal of the assisting vehicle's battery. Next, connect the negative (-) cable to the negative terminal of the assisting vehicle's battery and attach the other end of the negative cable to a metal surface away from the dead battery. Start the assisting vehicle, let it run for a few minutes, then try starting the Mitsubishi Starion. Once started, remove the cables in reverse order.
How do I replace a cabin air filter in a Mitsubishi Starion?
To replace a cabin air filter in a Mitsubishi Starion, locate the filter housing, typically located behind the glove compartment or under the dashboard. Remove the access panel or clips to reveal the filter. Slide out the old filter, noting the direction of airflow, and insert the new filter in the same orientation. Replace the access panel and secure it with the clips or screws. It is recommended to consult the owner's manual or a repair guide for the specific steps and precautions.
How do I replace a spark plug in a Mitsubishi Starion?
To replace a spark plug in a Mitsubishi Starion, first ensure that the engine is cool. Locate the spark plug wires or ignition coil pack and carefully remove them. Use a spark plug socket and ratchet to remove the old spark plug by turning it counterclockwise. Check the new spark plug's gap, then install it by turning it clockwise until snug. Reinstall the spark plug wires or ignition coil pack. It is recommended to consult the owner's manual or a repair guide for the specific steps and precautions.
How do I replace a windshield wiper blade in a Mitsubishi Starion?
To replace a windshield wiper blade in a Mitsubishi Starion, lift the wiper arm away from the windshield and locate the release tab or button on the wiper blade assembly. Press or pull the tab/button to release the old blade, then slide it off the wiper arm. Align the new wiper blade with the wiper arm and push it until it clicks into place. Gently lower the wiper arm back onto the windshield. It is recommended to consult the owner's manual or a repair guide for the specific steps and precautions.
How do I reset the maintenance light on a Mitsubishi Starion?
To reset the maintenance light on a Mitsubishi Starion, turn the ignition switch to the "ON" position without starting the engine. Press and hold the trip/reset button until the maintenance light starts flashing. Release the button, turn off the ignition, and then turn it back on to verify that the maintenance light has been reset.
How often should the air filter be replaced in a Mitsubishi Starion?
The air filter in a Mitsubishi Starion should be replaced according to the manufacturer's recommended intervals, typically every 15,000 to 30,000 miles or every 12 months, depending on driving conditions. A clogged or dirty air filter restricts airflow to the engine, reducing performance and fuel efficiency. Regularly replacing the air filter helps maintain optimal engine performance and prolongs the life of the engine.
How often should the engine oil be changed in a Mitsubishi Starion?
The engine oil in a Mitsubishi Starion should be changed according to the manufacturer's recommended intervals, which are typically every 5,000 to 7,500 miles or every 6 months, whichever comes first. Regular oil changes help maintain proper lubrication, remove contaminants, and prolong the engine's life. It is important to use the recommended oil viscosity and quality specified by the manufacturer.
What is the recommended tire pressure for a Mitsubishi Starion?
The recommended tire pressure for a Mitsubishi Starion is typically listed in the owner's manual. It is important to follow the recommended tire pressure to ensure optimal performance, handling, and safety of the vehicle. Proper tire pressure can also contribute to better fuel efficiency and longer tire life.
What type of fuel should I use in a Mitsubishi Starion?
A Mitsubishi Starion typically requires unleaded gasoline with an octane rating of 91 or higher. Using the recommended fuel ensures proper combustion, performance, and longevity of the engine. It is important to avoid using lower octane fuels, as this can lead to engine knocking and potential damage.
Mitsubishi Starion Manuals Index
Mitsubishi Starion Workshop Manual
-
- Mitsubishi Starion 1988 Workshop Manual
- (1,254 Pages)
- (Free)
Mitsubishi Starion Owners Manual
-
- Mitsubishi Starion Owners Manual
- (118 Pages)
- (Free)
Related Models