Nissan 100 NX Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Nissan 100 NX
The Nissan 100 NX, manufactured by Japanese automaker Nissan, was a front wheel drive two door compact sports car. It was initially introduced in the UK in 1991 as part of the Nissan Pulsar range replacing the Nissan Sunny 1.6 GSX Coupe. Due to a dispute between Nissan UK and Nissan Motor Corporation, the 100 NX was initially was only available with the 1.6L 95PS carburetor engine. Later, Nissan Motor Corporation relaunched the entire Nissan range in UK, including the 100 NX with higher specifications.Nissan 100 NX FAQ's
How can I improve the fuel efficiency of my Nissan 100 NX?
There are several measures you can take to improve the fuel efficiency of your Nissan 100 NX. Maintain regular maintenance, such as changing the air filter, spark plugs, and fuel filter. Ensure the tires are properly inflated and aligned, as underinflated or misaligned tires can decrease fuel efficiency. Practice smooth and consistent driving habits, avoiding rapid acceleration and excessive idling. Finally, remove any unnecessary weight from the vehicle to reduce fuel consumption.
How do I change the air filter in my Nissan 100 NX?
To change the air filter in your Nissan 100 NX, locate the air filter housing, which is typically found in the engine compartment. Open the housing and remove the old air filter. Inspect the new air filter to ensure it matches the dimensions and specifications required for your vehicle. Install the new air filter, close the housing securely, and ensure all clips or fasteners are properly engaged.
How do I change the oil in my Nissan 100 NX?
To change the oil in your Nissan 100 NX, locate the oil drain plug underneath the vehicle and remove it using a wrench. Allow the old oil to fully drain out before replacing the drain plug and tightening it securely. Then, remove the oil filter, replace it with a new one, and refill the engine with the recommended amount and type of oil.
How do I check and top up the transmission fluid in my Nissan 100 NX?
To check and top up the transmission fluid in your Nissan 100 NX, start the engine and let it warm up. Locate the transmission dipstick, which is usually labeled and located near the engine. With the engine running, pull out the dipstick, wipe it clean, reinsert it, and then pull it out again to check the fluid level. Add the recommended transmission fluid, if necessary, through the dipstick tube using a funnel.
How do I replace a blown fuse in my Nissan 100 NX?
To replace a blown fuse in your Nissan 100 NX, locate the fuse box, which is usually found under the dashboard or in the engine compartment. Identify the fuse that corresponds to the malfunctioning component or circuit, and use a fuse puller or needle-nose pliers to remove the old fuse. Replace it with a new fuse of the same amperage rating, and ensure it fits securely in the fuse box.
How do I replace a broken side mirror on my Nissan 100 NX?
To replace a broken side mirror on your Nissan 100 NX, start by removing the interior door panel to access the mirror mounting bolts. Disconnect any electrical connectors, if applicable, and remove the old mirror assembly. Install the new mirror by reversing the removal steps, ensuring all bolts are securely tightened. Test the mirror's functionality before reattaching the door panel.
How do I replace a headlight bulb in my Nissan 100 NX?
To replace a headlight bulb in your Nissan 100 NX, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector from the bulb, then twist and remove the bulb from the housing. Install the new bulb by reversing the removal steps, ensuring it is properly secured. Be cautious not to touch the glass portion of the new bulb with bare hands, as oil from the skin can cause premature bulb failure.
How do I replace a worn-out serpentine belt in my Nissan 100 NX?
To replace a worn-out serpentine belt in your Nissan 100 NX, locate the belt tensioner, which is usually a spring-loaded pulley. Use a wrench or socket to relieve tension on the belt, then slip it off the pulleys. Install the new belt by following the belt routing diagram, ensuring it is properly seated on each pulley. Finally, release the tensioner to apply proper tension to the new belt.
How do I reset the maintenance light on my Nissan 100 NX?
To reset the maintenance light on your Nissan 100 NX, turn the ignition switch to the ON position without starting the engine. Press and hold the trip odometer reset button until the maintenance light starts flashing. Release the button and turn the ignition switch to the OFF position. When you start the engine again, the maintenance light should be reset.
How do I troubleshoot a non-responsive power window in my Nissan 100 NX?
If you have a non-responsive power window in your Nissan 100 NX, start by checking the fuse associated with the power windows. If the fuse is intact, inspect the window switch for any signs of damage or malfunction. You may need to remove the door panel to access the window motor and regulator for further diagnosis. Consult the repair manual for detailed troubleshooting steps and component testing procedures.
How often should I replace the timing belt in my Nissan 100 NX?
The timing belt in a Nissan 100 NX typically needs to be replaced every 60,000 to 90,000 miles, or as recommended by the manufacturer. However, it is essential to consult the repair manual for the specific maintenance schedule for your vehicle. Regular timing belt replacement is crucial to prevent engine damage and ensure proper engine performance.
What can cause my Nissan 100 NX to overheat?
There are several potential causes for an overheating Nissan 100 NX. Some common culprits include a faulty thermostat, a malfunctioning radiator fan, a blocked radiator, or low coolant levels. It is important to diagnose the specific issue by systematically checking these components and consulting the repair manual for the appropriate troubleshooting steps.
What can I do if my Nissan 100 NX is experiencing rough idling?
If your Nissan 100 NX is experiencing rough idling, there are a few possible causes to investigate. Check for any vacuum leaks, inspect the spark plugs and ignition system, and clean or replace the idle air control valve. Additionally, it is recommended to ensure the throttle body is clean and free from carbon buildup. Refer to the repair manual for detailed instructions on diagnosing and addressing rough idling issues.
What should I do if my Nissan 100 NX won't start?
If your Nissan 100 NX won't start, there are a few possible causes to investigate. First, check the battery connections and ensure they are clean and tight. If the battery is in good condition, you may need to test the starter motor or ignition switch. Consult the repair manual for specific steps to diagnose and fix the issue.
What type of brake fluid should I use for my Nissan 100 NX?
For your Nissan 100 NX, it is recommended to use a DOT 3 or DOT 4 brake fluid, as specified by the manufacturer. These types of brake fluids have the necessary properties to provide optimal braking performance and withstand the operating conditions of the braking system. Always consult the repair manual and adhere to the manufacturer's recommendations for the correct type of brake fluid.
Nissan 100 NX Manuals Index
Nissan 100 NX Workshop Manual
-
- Nissan 100 NX 1990 Workshop Manual
- (1,218 Pages)
- (Free)
Nissan 100 NX Misc Document
- (Free)
Related Models