Oldsmobile Aurora Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Oldsmobile Aurora
The Oldsmobile Aurora is made by Oldsmobile between 1994 and 2003 and is a full-size luxury sports sedan The Aurora rides on the same Cadillac-derived G platform as the two-door Buick Riviera.
The Aurora became the high-end sport sedan offered by Oldsmobile, powered by a four-cam, 32-valve 4.0 L V8 supplanting the Oldsmobile Toronado coupe and eventually the Oldsmobile 98, in the lineup. The Aurora offered both a V8- and a V6-powered version in 2001 and 2002 but returned to being V8-only in 2003. The Oldsmobile Aurora was offered with a four-speed automatic transmission with performance algorithm shifting. No manual transmission was ever offered on the Aurora.
Oldsmobile Aurora Production Numbers
| Model year | Units |
|---|---|
| 1995 | 45,677 |
| 1996 | 22,349 |
| 1997 | 25,579 |
| 1998 | 23,955 |
| 1999 | 18,729 |
| 2001 | 53,640 |
| 2002 | 10,865 |
| 2003 | 7,217 |
| Total 1st generation | 136,289 |
| Total 2nd generation | 71,722 |
| Grand total | 208,011 |
Oldsmobile Aurora FAQ's
How do I bleed the brake system in my Oldsmobile Aurora?
To bleed the brake system in your Oldsmobile Aurora, start by locating the brake bleeder valves on each brake caliper or
How do I change the oil in my Oldsmobile Aurora?
To change the oil in your Oldsmobile Aurora, start by placing a drain pan beneath the oil drain plug and removing the plug to drain out the old oil. Once the oil has fully drained, replace the drain plug and remove the oil filter using an oil filter wrench. Install a new oil filter and then refill the engine with the recommended amount and type of oil specified in the owner's manual. Be sure to dispose of the old oil and filter properly.
How do I check the transmission fluid in my Oldsmobile Aurora?
To check the transmission fluid in your Oldsmobile Aurora, start by parking the vehicle on a level surface and allowing the engine to idle for a few minutes. Locate the transmission dipstick, which is typically labeled and located near the back of the engine bay. Remove the dipstick, wipe it clean, reinsert it fully, and then remove it again. Check the fluid level indicated on the dipstick; it should be within the designated "full" range. If the fluid is low, use a funnel to add the recommended type and amount of transmission fluid specified in the owner's manual.
How do I diagnose a faulty alternator in my Oldsmobile Aurora?
If you suspect a faulty alternator in your Oldsmobile Aurora, start by checking the battery voltage with a multimeter while the engine is running. A healthy alternator should provide a voltage reading of around 13.5 to 14.5 volts. If the reading is significantly lower or fluctuates, it may indicate a problem with the alternator. You can also check for any unusual noises coming from the alternator or signs of burning or melting around the connections. If you are unsure or need further assistance, it is best to consult a professional mechanic.
How do I diagnose a misfiring engine in my Oldsmobile Aurora?
If you are experiencing a misfiring engine in your Oldsmobile Aurora, start by checking the spark plugs and ignition wires for any signs of damage or wear. If they appear to be in good condition, the issue may be with the fuel system, such as a clogged fuel injector or a faulty fuel pump. You can also check for any vacuum leaks or issues with the engine's sensors, as these can also cause misfires. If you are unable to diagnose and fix the issue yourself, it is recommended to seek professional assistance.
How do I replace a burnt-out headlight bulb in my Oldsmobile Aurora?
To replace a burnt-out headlight bulb in your Oldsmobile Aurora, start by opening the hood and locating the back of the headlight assembly. Remove the electrical connector from the back of the bulb by pressing the release tab and pulling it off. Next, twist the bulb counterclockwise to unlock it from the assembly and carefully pull it out. Insert the new bulb into the socket, ensuring it is securely in place, and then twist it clockwise to lock it. Reconnect the electrical connector and test the headlight before closing the hood.
How do I replace a faulty ignition coil in my Oldsmobile Aurora?
To replace a faulty ignition coil in your Oldsmobile Aurora, start by locating the coil, which is typically attached to the top of the engine. Disconnect the electrical connector from the coil by pressing the release tab and pulling it off. Remove the mounting bolts or screws that secure the coil in place and carefully lift it out. Install the new ignition coil by aligning it with the mounting holes and tightening the bolts or screws. Reconnect the electrical connector and repeat the process for any other faulty coils.
How do I replace a faulty oxygen sensor in my Oldsmobile Aurora?
To replace a faulty oxygen sensor in your Oldsmobile Aurora, start by locating the sensor, which is typically located in the exhaust system. Using an oxygen sensor socket or a wrench, remove the old sensor by turning it counterclockwise. Clean the threads of the sensor bung with a wire brush or a thread chaser tool. Apply anti-seize compound to the threads of the new sensor and install it by turning it clockwise. Make sure it is tightened to the specified torque value as indicated in the repair manual.
How do I replace the cabin air filter in my Oldsmobile Aurora?
To replace the cabin air filter in your Oldsmobile Aurora, locate the cabin air filter housing, which is typically located behind the glove box or under the dashboard on the passenger side. Open the housing by removing the clips or screws holding it in place. Take out the old cabin air filter and replace it with a new one, making sure it is properly aligned with the airflow direction indicated on the filter. Close the housing, secure it with the clips or screws, and test the air conditioning and heating system to ensure proper airflow.
How do I replace the windshield wiper blades on my Oldsmobile Aurora?
To replace the windshield wiper blades on your Oldsmobile Aurora, start by lifting the wiper arm away from the windshield and locating the release tab or button on the wiper blade assembly. Press or slide the tab/button to release the old blade from the wiper arm. Next, align the new wiper blade with the arm and push it in until it clicks or locks into place. Lower the wiper arm back onto the windshield and repeat the process for the other wiper blade.
How do I reset the check engine light in my Oldsmobile Aurora?
To reset the check engine light in your Oldsmobile Aurora, you can try disconnecting the negative terminal of the battery for a few minutes and then reconnecting it. However, it is important to note that simply resetting the light will not fix the underlying issue that triggered it. If the check engine light comes back on after resetting, it is recommended to have the vehicle diagnosed by a professional using a diagnostic scanner to identify and address the specific problem.
How do I troubleshoot a faulty power window in my Oldsmobile Aurora?
If you are experiencing issues with a power window in your Oldsmobile Aurora, start by checking the fuse for the power window circuit and replace it if necessary. If the fuse is not the problem, then the issue may be with the window switch or the motor/regulator assembly. Test the window switch by swapping it with a known working switch, and if the window operates with the new switch, replace the faulty one. If the switch is not the issue, then the motor/regulator assembly may need to be inspected and potentially replaced by a professional.
How often should I replace the spark plugs in my Oldsmobile Aurora?
The spark plugs in your Oldsmobile Aurora should be replaced approximately every 30,000 miles or as recommended in the owner's manual. Regularly replacing the spark plugs helps maintain optimal engine performance and fuel efficiency. It is also a good idea to inspect the spark plug wires and ignition coils during the replacement process and replace them if necessary.
What should I do if my Oldsmobile Aurora's battery is dead?
If your Oldsmobile Aurora's battery is dead, you can jump-start it using jumper cables and another vehicle with a charged battery. Connect the positive terminal of the dead battery to the positive terminal of the charged battery using the red jumper cable. Then, connect the negative terminal of the charged battery to a metal surface on the engine block of the dead vehicle. Start the engine of the vehicle with the charged battery and let it run for a few minutes, then try starting your Aurora. If the battery continues to have issues, it may need to be replaced.
What should I do if my Oldsmobile Aurora's engine overheats?
If your Oldsmobile Aurora's engine starts to overheat, the first step is to turn off the air conditioning and turn on the heater to help dissipate some of the heat. Pull over to a safe location and let the engine cool down before opening the hood. Check the coolant level and look for any leaks in the cooling system. If the coolant level is low, add a mixture of coolant and water according to the recommended ratios. If the issue persists, it is advisable to have the vehicle inspected by a professional mechanic.
Oldsmobile Aurora Manuals Index
Oldsmobile Aurora Workshop Manual
-
- Oldsmobile Aurora 1996 Workshop Manual V8 4.0L
- (13,223 Pages)
- (Free)
Oldsmobile Aurora Owners Manual
-
- 1995 Oldsmobile Aurora Owners Manual
- (372 Pages)
- (Free)
-
- 1996 Oldsmobile Aurora Owners Manual
- (388 Pages)
- (Free)
-
- 1997 Oldsmobile Aurora Owners Manual
- (404 Pages)
- (Free)
-
- 1998 Oldsmobile Aurora Owners Manual
- (380 Pages)
- (Free)
-
- 1999 Oldsmobile Aurora Owners Manual
- (360 Pages)
- (Free)
-
- 2001 Oldsmobile Aurora Owners Manual
- (376 Pages)
- (Free)
-
- 2002 Oldsmobile Aurora Owners Manual
- (373 Pages)
- (Free)