Oldsmobile Intrigue Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Oldsmobile Intrigue
As Vauxhall/Bedford was a General Motors subsidiary, outside of the United Kingdom and Ireland, the CF was sold through Opel dealers as the Opel Bedford Blitz from 1973 on. The CF was notable for being the last solely Vauxhall-engineered vehicle when it was discontinued in 1987 (the last Vauxhall passenger car had been the HC Viva which had ceased production in 1979; since all Vauxhall models by that point had switched to being based on Opel platforms. The Bedford brand continued on certain badge engineered light van designs from Isuzu and Suzuki, before being retired in 1991.Oldsmobile Intrigue FAQ's
How do I change the oil in my Oldsmobile Intrigue?
To change the oil in your Oldsmobile Intrigue, you will need to locate the oil drain plug underneath the vehicle and remove it using a wrench. Allow the old oil to drain completely, then replace the drain plug and tighten it securely. Next, locate the oil filter and remove it using an oil filter wrench. Apply a thin coat of new oil to the rubber gasket of the new oil filter and install it by hand, tightening it an additional three-quarters of a turn. Finally, refill the engine with the recommended amount and type of oil as specified in the owner's manual.
How do I diagnose a rough idle in my Oldsmobile Intrigue?
A rough idle in your Oldsmobile Intrigue could be caused by various factors. Start by checking the spark plugs and wires for any signs of damage or wear. If necessary, replace them. Additionally, inspect the air filter and clean or replace it if dirty. Check the fuel injectors for clogs and use a fuel system cleaner if needed. Finally, ensure the throttle body is clean and functioning properly. If the rough idle persists, it may be necessary to consult a professional mechanic for further diagnosis.
How do I replace the brake pads on my Oldsmobile Intrigue?
To replace the brake pads on your Oldsmobile Intrigue, start by loosening the lug nuts on the wheel of the brake you want to work on. Then, lift the vehicle using a jack and secure it with jack stands. Remove the lug nuts and the wheel to access the brake caliper. Using a wrench or socket, remove the caliper bolts and slide the caliper off the rotor. Remove the old brake pads and replace them with the new ones, ensuring they are properly aligned. Slide the caliper back onto the rotor and tighten the caliper bolts. Finally, reinstall the wheel and tighten the lug nuts.
Oldsmobile Intrigue Manuals Index
Oldsmobile Intrigue Workshop Manual
-
- Oldsmobile Intrigue 1998 Workshop Manual 3.8L VIN K
- (18,213 Pages)
- (Free)
Oldsmobile Intrigue Owners Manual
-
- 1998 Oldsmobile Intrigue Owners Manual
- (340 Pages)
- (Free)
-
- 1999 Oldsmobile Intrigue Owners Manual
- (360 Pages)
- (Free)
-
- 2000 Oldsmobile Intrigue Owners Manual
- (348 Pages)
- (Free)
-
- 2001 Oldsmobile Intrigue Owners Manual
- (346 Pages)
- (Free)
-
- 2002 Oldsmobile Intrigue Owners Manual
- (363 Pages)
- (Free)