Peugeot 108 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Peugeot 108
The Peugeot 108 is a city car, launched by the French manufacturer Peugeot in March 2014, at the Geneva Motor Show, with sales expected by summer 2014. It is related to the Citroën C1 and Toyota Aygo, again sharing the same chassis, engines, transmissions and electricals. Cars are built in the same factory, situated in the Czech Republic. The 108 is powered by a choice of two 3-cylinder petrol engines: a 1.0-litre VTi with 68 bhp, emitting up to 97g/km of CO2, with an e-VTi producing 88g/km, and a larger 1.2-litre VTi has 82 bhp and emits 99g/km of CO2. It is produced as a three or five door hatchback.Peugeot 108 FAQ's
How do I adjust the headlights on my Peugeot 108?
To adjust the headlights on your Peugeot 108, park the vehicle on a level surface facing a wall or garage door. Mark the vertical and horizontal center lines of the headlight beams on the wall. Use the adjustment screws located on the back of the headlight assembly to align the beams with the marked center lines. It is advisable to consult your Peugeot 108 automotive repair manual for precise instructions and specifications.
How do I change a flat tire on my Peugeot 108?
To change a flat tire on your Peugeot 108, start by parking on a flat, stable surface and engaging the parking brake. Locate the spare tire, jack, and lug wrench. Loosen the lug nuts, then use the jack to lift the vehicle until the flat tire is off the ground. Remove the lug nuts, take off the flat tire, and replace it with the spare. Tighten the lug nuts by hand, lower the vehicle, and then use the lug wrench to fully tighten the lug nuts in a star pattern.
How do I change the oil in my Peugeot 108?
To change the oil in your Peugeot 108, start by locating the oil drain plug underneath the vehicle. Remove the drain plug and let the old oil drain completely. Once drained, replace the drain plug and refill the engine with the recommended amount and type of oil specified in your Peugeot 108 automotive repair manual.
How do I change the windshield wipers on my Peugeot 108?
To change the windshield wipers on your Peugeot 108, lift the wiper arm away from the windshield. Locate the release tab or button on the wiper blade assembly and press or slide it to detach the old blade. Attach the new wiper blade by following the manufacturer's instructions or referring to your Peugeot 108 automotive repair manual. Ensure the new blade is securely in place before gently lowering the wiper arm back onto the windshield.
How do I check and top up the coolant in my Peugeot 108?
To check and top up the coolant in your Peugeot 108, start with a cold engine. Locate the coolant reservoir, usually a translucent plastic tank with min/max markings. Ensure the coolant level is between the minimum and maximum marks. If needed, add a 50/50 mixture of coolant and distilled water to bring it to the correct level. Refer to your Peugeot 108 automotive repair manual for specific instructions.
How do I jump-start my Peugeot 108?
If your Peugeot 108's battery is dead and you need to jump-start it, park a vehicle with a good battery next to yours. Connect the positive (red) jumper cable to the positive terminal of your battery, then connect the other end of the positive cable to the positive terminal of the working battery. Next, connect the negative (black) cable to the negative terminal of the working battery and attach the other end to a grounded metal surface on your vehicle. Start the working vehicle, let it run for a few minutes, then try starting your Peugeot 108.
How do I replace a blown fuse in my Peugeot 108?
To replace a blown fuse in your Peugeot 108, locate the fuse box, typically located in the engine compartment or under the dashboard. Use the fuse diagram in your Peugeot 108 automotive repair manual to identify the specific fuse for the affected circuit. Carefully remove the blown fuse using a fuse puller or tweezers, then insert a new fuse of the same rating. Make sure the new fuse is securely in place before closing the fuse box.
How do I replace the brake pads on my Peugeot 108?
To replace the brake pads on your Peugeot 108, start by safely lifting the vehicle and removing the wheels. Locate the brake caliper and remove the retaining pins or clips. Slide out the old brake pads and replace them with new ones. Reassemble the caliper, ensuring proper alignment, and repeat the process for all four wheels.
How do I reset the service light on my Peugeot 108?
To reset the service light on your Peugeot 108, start by turning the ignition to the "On" position without starting the engine. Locate and press the trip reset button or the menu button on the dashboard until the service indicator or message appears. Hold the button down until the indicator or message starts flashing, then release it. The service light should now be reset. If this procedure does not work, refer to the Peugeot 108 automotive repair manual for specific instructions.
How do I troubleshoot an electrical issue in my Peugeot 108?
When troubleshooting an electrical issue in your Peugeot 108, start by checking the corresponding fuse. Use the fuse diagram in your Peugeot 108 automotive repair manual to locate the relevant fuse box. If the fuse is intact, inspect the wiring connections for any signs of damage or loose connections. It may be helpful to use a multimeter to check for voltage or continuity. If the issue persists, it is recommended to consult a professional mechanic or refer to the repair manual for further guidance.
How often should I change the air filter in my Peugeot 108?
The frequency of air filter replacement in a Peugeot 108 depends on various factors such as driving conditions and air quality. However, a general guideline is to inspect and potentially replace the air filter every 12,000 to 15,000 miles or once a year. Regular air filter maintenance helps maintain engine performance and fuel efficiency.
What is the recommended tire pressure for a Peugeot 108?
The recommended tire pressure for a Peugeot 108 is typically specified in the owner's manual or on a sticker located on the driver's side door jamb. It is important to maintain the correct tire pressure to ensure optimal handling, fuel efficiency, and tire longevity. Always refer to the Peugeot 108 automotive repair manual for the most accurate and up-to-date information.
What type of engine oil should I use in my Peugeot 108?
The recommended type and viscosity of engine oil for your Peugeot 108 can be found in the owner's manual or the Peugeot 108 automotive repair manual. It is crucial to use the appropriate oil to ensure proper lubrication and performance. Factors such as climate and driving conditions may also influence the recommended oil specifications.
Why is my Peugeot 108's engine overheating?
Engine overheating in a Peugeot 108 can be caused by various factors, including a malfunctioning thermostat, low coolant level, a faulty radiator fan, or a blocked radiator. It is essential to address engine overheating promptly to prevent potential damage. Consult your Peugeot 108 automotive repair manual for specific troubleshooting steps and consider seeking professional assistance if needed.
Peugeot 108 on Amazon
Peugeot 108 Owners Manual
-
- Peugeot 108 2014 Owners Manual
- (256 Pages)
- (Free)
-
- Peugeot 108 2015 Owners Manual
- (260 Pages)
- (Free)
Peugeot 108 Misc Document
-
- Peugeot 108 Misc Documents Brochure
- (20 Pages)
- (Free)
Related Models