Peugeot 206 Workshop Manuals and Repair Manuals

Every Manual available online - found by our community and shared for FREE. Enjoy!

Peugeot 206

The Peugeot 206 was super-mini car by the French Manufacturer Peugeot and was manufactured between 1998 and 2010. The Car was the successor to the Peugeot 205 and had a lot of resemblance to it. This vehicle was available in six variants and also manufactured with both petrol and diesel versions. Its facelifted version was initially launched in South America in September 2008,and in China in November 2008, in hatchback, sedan and station wagon body styles, and known as the 207 Compact, and as the 207 respectively. This version was subsequently launched in Europe in February 2009,only in hatchback form and marketed as the 206+. The production of the vehicle was stopped owing to the fact that the performance and demand of the super mini vehicles were experiencing a steady decline.

Peugeot 206 FAQ's

How do I adjust the clutch on a Peugeot 206?

If you need to adjust the clutch on a Peugeot 206, start by locating the clutch cable under the hood. Loosen the locknut on the cable and adjust the length of the cable by turning the adjusting nut. The goal is to achieve proper clutch pedal free play, which ensures smooth engagement and disengagement of the clutch. Once the desired free play is achieved, tighten the locknut to secure the adjustment.

How do I adjust the headlights on a Peugeot 206?

To adjust the headlights on a Peugeot 206, park the vehicle on a level surface facing a wall or garage door. Locate the adjustment screws, usually located near the headlight assembly. Use a screwdriver or a suitable tool to turn the screws, adjusting the headlights' vertical and horizontal aim according to the desired specifications. It is recommended to consult the manual for specific adjustment ranges and proper alignment procedures.

How do I change the oil in a Peugeot 206?

To change the oil in a Peugeot 206, you will need to locate the oil drain plug underneath the car, remove it, and let the old oil drain out. Once the oil has fully drained, replace the drain plug and proceed to refill the engine with the recommended type and amount of oil specified in the manual. It is important to also replace the oil filter during this process to ensure optimal engine performance and longevity.

How do I diagnose a transmission problem in a Peugeot 206?

If you suspect a transmission problem in your Peugeot 206, start by checking the transmission fluid level and condition. If the fluid is low or shows signs of contamination, it may indicate a leak or internal transmission issue. Additionally, inspect the transmission shift cables, linkage, and solenoids for any visible damage or misalignment. If the issue persists, consulting the repair manual for diagnostic procedures and recommended next steps is advisable.

How do I diagnose an engine misfire in a Peugeot 206?

If you are experiencing an engine misfire in your Peugeot 206, start by checking the spark plugs and ignition coils for any signs of damage or wear. If they appear to be in good condition, you may want to inspect the fuel injectors for clogs or malfunction. Additionally, it is recommended to perform a compression test to check the engine's internal condition. If the issue persists, consulting a professional or referring to the repair manual for further guidance is advisable.

How do I fix a power window that is not working in a Peugeot 206?

If a power window is not working in a Peugeot 206, start by checking the fuse related to the window circuit and replace it if necessary. Inspect the wiring harness for any visible damage or loose connections. If the fuse and wiring appear to be in good condition, the issue may be with the window motor or the window switch. Consult the repair manual for testing procedures and component locations to further diagnose and resolve the problem.

How do I flush the cooling system in a Peugeot 206?

To flush the cooling system in a Peugeot 206, start by ensuring the engine is cool and opening the radiator drain plug to let the coolant drain into a suitable container. Once the coolant has fully drained, close the drain plug and fill the system with a coolant flush solution mixed with water as per the manufacturer's instructions. Allow the engine to run for the recommended period specified in the manual. Afterward, drain the flushing solution, close the drain plug, and refill the cooling system with the appropriate coolant mixture.

How do I replace a cabin air filter on a Peugeot 206?

To replace a cabin air filter on a Peugeot 206, locate the filter housing, usually located behind the glove compartment or under the dashboard. Remove any clips or screws securing the housing and open it to access the old filter. Carefully remove the old filter, taking note of its orientation. Install the new filter following the same orientation and close the housing securely, ensuring all clips or screws are properly fastened.

How do I replace a fuel pump on a Peugeot 206?

To replace a fuel pump on a Peugeot 206, start by safely relieving the fuel system pressure using the recommended procedures and tools. Locate the fuel pump assembly, typically found inside the fuel tank. Disconnect any electrical connectors and fuel lines from the assembly. Remove any retaining screws or clips and carefully extract the old fuel pump. Install the new fuel pump, ensuring proper alignment and reattach the electrical connectors and fuel lines. Reassemble the fuel pump assembly, ensuring all components are securely fastened, and test the fuel system for proper operation.

How do I replace a headlight bulb on a Peugeot 206?

To replace a headlight bulb on a Peugeot 206, open the hood and locate the back of the headlight assembly. Disconnect the power connector from the bulb and remove any retaining clips or covers. Carefully remove the old bulb and replace it with a new one, ensuring it is correctly seated. Finally, reattach any clips or covers, reconnect the power connector, and test the headlight to ensure proper functionality.

How do I replace a serpentine belt on a Peugeot 206?

To replace a serpentine belt on a Peugeot 206, locate the tensioner pulley and use a suitable tool to relieve tension on the belt. While holding the tensioner in the released position, slip the old belt off the pulleys. Install the new belt, ensuring it follows the correct routing diagram provided in the repair manual. Finally, release the tensioner, double-check the belt's alignment, and ensure proper tension before starting the engine.

How do I replace a wheel bearing on a Peugeot 206?

To replace a wheel bearing on a Peugeot 206, start by safely lifting the vehicle and removing the wheel. Locate the wheel hub assembly and remove any bolts or retaining clips securing it to the suspension. Carefully detach the hub assembly, taking note of the orientation of any ABS sensors or wires. Use a suitable tool to press or hammer out the old wheel bearing and press in the new one. Reassemble the hub assembly, ensuring proper alignment and torque specifications, and reinstall the wheel.

How do I replace the air filter in a Peugeot 206?

To replace the air filter in a Peugeot 206, locate the air filter housing, typically found near the engine. Remove any clips or screws securing the housing and carefully open it to access the old filter. Take note of the filter's orientation and remove it, ensuring not to let any debris fall into the intake. Install the new filter following the same orientation and close the housing securely, making sure all clips or screws are properly fastened.

How do I replace the brake pads on a Peugeot 206?

To replace the brake pads on a Peugeot 206, start by removing the wheel and locating the brake caliper. Use a suitable tool to retract the caliper's piston, allowing enough clearance to remove the old brake pads. Once the old pads are removed, install the new pads, ensuring they are properly aligned with the caliper and brake rotor. Finally, reassemble the caliper, replace the wheel, and test the brakes before driving.

How do I troubleshoot an electrical issue in a Peugeot 206?

When troubleshooting an electrical issue in a Peugeot 206, start by checking the fuses related to the affected system. If the fuses are intact, inspect the wiring harness for any signs of damage or loose connections. Using a multimeter, test the voltage at various points in the circuit to identify any abnormalities. If the issue persists, consulting the repair manual for specific wiring diagrams and component locations is recommended.

Peugeot 206 Manuals Index

Peugeot 206 Workshop Manual

Peugeot 206 Owners Manual

Related Models

Peugeot 206 on Amazon

Peugeot 206 Petrol and Diesel Service and Repair Manual: 2002-2009 (Haynes Service and Repair Manuals)