Peugeot 806 Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Peugeot 806
The Eurovans are a family of large MPVs from the Citroën, Peugeot, Fiat and Lancia marques that were produced at the jointly-owned Sevel Nord factory in France. It was launched in March 1994, and production ceased in November 2010 for the Fiat and Lancia models, and in June 2014 for the Citroën and Peugeot siblings. The 806 was named according to Peugeot's "x0x" system, where the first digit indicates model series (vehicle size/class) and the last indicates the generation, with a central zero. The largest Peugeot series then available was the executive saloon 605, so Peugeot chose 8, potentially leaving room for an in between model. The Eurovans were launched when Peugeot was replacing the "x05" with "x06" models, so it was appropriately labeled "806".Peugeot 806 FAQ's
How can I replace a blown fuse in my Peugeot 806?
To replace a blown fuse in your Peugeot 806, locate the fuse box, which is usually located under the dashboard or in the engine compartment. Use the diagram on the fuse box cover or in the owner's manual to identify the fuse corresponding to the malfunctioning component. Gently pull out the blown fuse using a fuse puller or a pair of pliers, then insert a new fuse of the same amperage rating. Make sure to dispose of the blown fuse properly.
How do I change the oil in my Peugeot 806?
To change the oil in your Peugeot 806, start by locating the oil drain plug underneath the engine. Use a wrench to remove the drain plug and let the old oil drain into a suitable container. Once the oil has completely drained, replace the drain plug and refill the engine with the recommended amount and type of fresh oil.
How do I replace a damaged side mirror on my Peugeot 806?
To replace a damaged side mirror on your Peugeot 806, start by removing the interior door panel to access the mirror mounting bolts. Disconnect the electrical connector and remove the bolts securing the mirror to the door. Carefully remove the damaged mirror and replace it with the new one, ensuring it is securely fastened. Reconnect the electrical connector, reinstall the door panel, and test the functionality of the new side mirror.
How do I replace a faulty ignition coil in my Peugeot 806?
To replace a faulty ignition coil in your Peugeot 806, start by disconnecting the negative battery cable. Locate the faulty ignition coil, typically attached to the engine or the ignition module. Disconnect the electrical connector and remove any mounting bolts securing the coil. Replace the old coil with the new one, ensuring it is properly seated and connected. Reconnect the electrical connector and the negative battery cable, then test the ignition system to ensure proper functioning.
How do I replace a headlight bulb in my Peugeot 806?
To replace a headlight bulb in your Peugeot 806, open the hood and locate the back of the headlight assembly. Remove the protective cover, typically held in place by clips or screws, to access the bulb. Disconnect the electrical connector from the bulb and remove the old bulb by twisting it counterclockwise. Install the new bulb by inserting it into the socket and twisting it clockwise. Reconnect the electrical connector, replace the protective cover, and test the headlights to ensure they are functioning properly.
How do I reset the maintenance light on my Peugeot 806?
To reset the maintenance light on your Peugeot 806, turn the ignition key to the "ON" position without starting the engine. Press and hold the trip meter reset button until the maintenance light begins to flash. Release the button and start the engine. The maintenance light should now be reset, indicating that the maintenance reminder has been cleared.
How often should I change the timing belt in my Peugeot 806?
The timing belt in your Peugeot 806 should be replaced according to the manufacturer's recommended maintenance schedule, typically between 60,000 and 100,000 miles. It is essential to replace the timing belt at the recommended intervals to prevent potential engine damage or failure. Neglecting to replace the timing belt can result in expensive repairs and serious engine damage.
What should I do if my Peugeot 806 is overheating?
If your Peugeot 806 is overheating, the first thing to do is safely pull over and turn off the engine. Allow the engine to cool down before checking the coolant level in the radiator. If the coolant level is low, add the appropriate coolant mixture. If the issue persists, it may be necessary to seek professional assistance to diagnose and fix the underlying cause of the overheating.
What should I do if my Peugeot 806's battery keeps dying?
If your Peugeot 806's battery keeps dying, it may be due to a faulty battery, a parasitic drain, or a malfunctioning charging system. Start by testing the battery's voltage and charging it if necessary. If the battery is in good condition, check for any electrical components that may be drawing excessive power when the vehicle is turned off. If you are unable to identify the cause, it is recommended to have the electrical system inspected by a professional.
What should I do if my Peugeot 806's brakes are squeaking?
If your Peugeot 806's brakes are squeaking, it is typically an indication that the brake pads may be worn or contaminated. Have the brake pads inspected by a qualified mechanic and replace them if necessary. Additionally, ensure that the brake rotors are in good condition and not excessively worn or warped. Proper maintenance and regular brake inspections can help prevent squeaking and ensure optimal braking performance.
What type of engine oil should I use in my Peugeot 806?
The type of engine oil recommended for your Peugeot 806 can vary depending on the specific model and engine. Consult the owner's manual or the manufacturer's recommendations for the correct viscosity and specification of engine oil. Using the recommended oil can help ensure optimal engine performance and longevity.
Why is my Peugeot 806's air conditioning not working?
There are several possible reasons why your Peugeot 806's air conditioning may not be working. Check if the air conditioning compressor is engaging when the AC is turned on. If it is not, there may be an issue with the compressor clutch or electrical connections. Additionally, check the refrigerant level and ensure it is at the proper level. If all else fails, it is advisable to consult a professional technician who can diagnose and repair the specific issue.
Why is my Peugeot 806's power steering not working?
If your Peugeot 806's power steering is not working, it may be due to low power steering fluid levels, a faulty power steering pump, or a problem with the steering rack. Start by checking the power steering fluid level and adding fluid if necessary. If the fluid level is adequate, have the power steering pump and the steering rack inspected by a professional technician to diagnose and address the issue.
Why is my Peugeot 806's transmission slipping?
If your Peugeot 806's transmission is slipping, it may be due to low transmission fluid levels or a faulty transmission component. Check the transmission fluid level and ensure it is at the appropriate level. If it is low, add the recommended transmission fluid. If the fluid level is correct, it is recommended to have the transmission inspected by a professional technician to diagnose and address any potential issues.
Peugeot 806 Workshop Manual
-
- Peugeot 806 1994 2001 Workshop Manual Russian
- (250 Pages)
- (Free)
-
- Peugeot 806 Workshop Manual German
- (112 Pages)
- (Free)
-
- Peugeot 806 Workshop Manual Spanish
- (272 Pages)
- (Free)
Peugeot 806 Owners Manual
-
- Peugeot 806 Owners Manual
- (101 Pages)
- (Free)
Related Models