Saturn Aura Hybrid Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Saturn Aura HybridThe Mercury Mountaineer was a mid-size luxury sport utility vehicle (SUV) that was sold by the Mercury division of Ford Motor Company from 1997 until 2010. Sharing many of its features with the Ford Explorer, the vehicles were virtually identical, in terms of hardware. Some controversy resulted after the media highlighted a number of rollovers involving Explorers and Mountaineers fitted with Firestone tires. The Mountaineer has been praised for its excellent handling and stability. The Mountaineer was never sold in Canada. As part of the discontinuation of the Mercury brand, production of the Mountaineer ended in late 2010.
Saturn Aura Hybrid FAQ's
How do I change a flat tire on my Saturn Aura Hybrid?
To change a flat tire on your Saturn Aura Hybrid, first, ensure that you are in a safe location away from traffic. Locate the spare tire, jack, and lug wrench in the trunk. Use the lug wrench to loosen the lug nuts on the flat tire but do not remove them yet. Position the jack under the vehicle's designated lifting point and raise the car until the flat tire is off the ground. Remove the lug nuts, take off the flat tire, and replace it with the spare tire. Tighten the lug nuts by hand, lower the vehicle, and then use the lug wrench to fully tighten the lug nuts in a star pattern.
How do I check the transmission fluid level in my Saturn Aura Hybrid?
To check the transmission fluid level in your Saturn Aura Hybrid, park the vehicle on a level surface and make sure the engine is running. Locate the transmission dipstick, usually labeled with a yellow handle, and pull it out. Wipe it clean, reinsert it, and pull it out again to check the fluid level. The fluid should be between the two marks on the dipstick. If it's low, add the recommended transmission fluid until it reaches the correct level.
How do I jump-start my Saturn Aura Hybrid?
To jump-start your Saturn Aura Hybrid, you will need a set of jumper cables and a second vehicle with a charged battery. Park the vehicles close enough for the jumper cables to reach both batteries but ensure they are not touching. Connect the positive (red) jumper cable to the positive terminal of the dead battery and the other end to the positive terminal of the charged battery. Then, connect the negative (black) jumper cable to the negative terminal of the charged battery and the other end to a metal, unpainted part of the engine block on the dead battery vehicle. Start the working vehicle and let it run for a few minutes, then try starting your Saturn Aura Hybrid. Once it starts, remove the jumper cables in reverse order, being cautious not to touch the ends together or to any metal surfaces.
How do I perform a coolant flush on my Saturn Aura Hybrid?
Performing a coolant flush on your Saturn Aura Hybrid involves draining the old coolant and replacing it with fresh coolant. Start by locating the coolant drain plug at the bottom of the radiator and placing a container underneath to catch the drained coolant. Remove the drain plug and allow the coolant to completely drain. Once drained, close the drain plug and refill the radiator with the recommended coolant mixed with distilled water in the appropriate ratio. Run the engine with the radiator cap off to ensure any air bubbles are eliminated. Check the coolant level and top it off as needed. It is crucial to dispose of the old coolant properly according to local regulations.
How do I perform a wheel alignment on my Saturn Aura Hybrid?
Performing a wheel alignment on your Saturn Aura Hybrid usually requires specialized equipment and expertise. It is recommended to take your vehicle to a
How do I replace a headlight bulb on my Saturn Aura Hybrid?
To replace a headlight bulb on your Saturn Aura Hybrid, open the hood and locate the back of the headlight assembly. Twist or unclip the bulb socket and carefully remove it from the assembly. Remove the old bulb by sliding it out of the socket. Insert the new bulb into the socket, ensuring it is properly aligned. Reinsert the bulb socket into the assembly and secure it by twisting or clipping it back in place. Test the headlight to ensure it is functioning correctly. It is advisable to replace both headlight bulbs simultaneously for consistent illumination.
How do I replace the battery in my Saturn Aura Hybrid?
To replace the battery in your Saturn Aura Hybrid, start by ensuring the vehicle is turned off and the ignition key is removed. Locate the battery, usually in the engine bay or trunk. Remove the negative (black) cable from the battery terminal using a wrench or pliers. Then, remove the positive (red) cable in the same manner. Carefully loosen and remove the battery hold-down bracket or strap. Lift the old battery out of its tray and replace it with a new one of the same size and specifications. Secure the hold-down bracket or strap and reconnect the positive (+) cable followed by the negative (-) cable. Double-check the connections and ensure they are tightly secured.
How do I replace the brake pads on my Saturn Aura Hybrid?
To replace the brake pads on your Saturn Aura Hybrid, start by safely lifting the vehicle and removing the wheel. Locate the brake caliper, which is held in place by bolts or pins. Remove the bolts or pins to release the caliper, being careful not to damage the brake line. Once the caliper is free, remove the old brake pads and replace them with new ones. Reassemble the caliper, reinstall the wheel, and repeat the process for the other wheels. It is recommended to consult your vehicle's repair manual for detailed instructions and diagrams specific to your model.
How do I replace the serpentine belt on my Saturn Aura Hybrid?
To replace the serpentine belt on your Saturn Aura Hybrid, locate the belt tensioner pulley and use a wrench or socket to rotate it counterclockwise. This will relieve tension on the belt, allowing you to remove it from the pulleys. Take note of the belt routing or use a diagram if available. Install the new serpentine belt following the correct routing, ensuring it is properly seated on each pulley. Release the tensioner pulley, allowing it to apply tension to the new belt. Inspect the belt for proper alignment and tension before starting the engine. Consult your vehicle's repair manual for detailed instructions specific to your model.
How do I replace the windshield wipers on my Saturn Aura Hybrid?
To replace the windshield wipers on your Saturn Aura Hybrid, lift the wiper arm away from the windshield and locate the release tab or button on the wiper blade. Press or squeeze the tab/button and slide the old wiper blade off the wiper arm. Align the new wiper blade with the wiper arm and slide it into place until it clicks securely. Gently lower the wiper arm back onto the windshield. It is recommended to replace both wiper blades at the same time for balanced performance.
How do I reset the maintenance light on my Saturn Aura Hybrid?
To reset the maintenance light on your Saturn Aura Hybrid, turn the ignition key to the "On" position without starting the engine. Press the accelerator pedal down to the floor three times within five seconds. Wait for the maintenance light to start flashing, indicating that it has been reset. Release the accelerator pedal and turn off the ignition. Start the engine to ensure the maintenance light no longer appears. If the light persists, consult the vehicle's repair manual or schedule a service appointment with a qualified technician.
How do I troubleshoot an electrical issue in my Saturn Aura Hybrid?
When troubleshooting an electrical issue in your Saturn Aura Hybrid, start by checking the fuses related to the malfunctioning component. Use the owner's manual or the fuse box diagram to locate the specific fuse. Inspect the fuse and replace it if it is blown. If the fuse is intact, check for loose or disconnected wires around the affected area. Inspect the wiring harness and connectors for any signs of damage or corrosion. If no visible issues are found, it is recommended to consult a professional mechanic or refer to the vehicle's repair manual for further diagnosis and repair.
How often should I replace the air filter in my Saturn Aura Hybrid?
The air filter in your Saturn Aura Hybrid should be replaced every 15,000 miles or as recommended by the manufacturer. However, if you drive in dusty or polluted areas, it is advisable to check and replace the air filter more frequently. A clean air filter allows for optimal air flow to the engine, improving fuel efficiency and overall performance. Regular maintenance of the air filter ensures the longevity of your vehicle's engine and helps maintain good air quality inside the cabin.
What type of oil should I use in my Saturn Aura Hybrid?
For your Saturn Aura Hybrid, it is recommended to use synthetic oil with a viscosity of 5W-30. Synthetic oil provides better protection and performance, especially in hybrid vehicles. Make sure to check the owner's manual for any specific oil recommendations or consult a certified mechanic for further guidance. Regular oil changes are crucial to maintain the longevity of your vehicle's engine.
Get notified for new manuals?
We'll send you a quick email when a new Saturn Aura Hybrid manual is added.