Ssangyong Rodius Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Ssangyong RodiusThe SsangYong Rodius is a large MPV released in late 2004 by the Korean automaker SsangYong Motor Company. It is available in 7, 9 and 11 seat configurations (3 or 4 rows; a 5-seater version is also available in Hong Kong. The seats can be folded to act as tables or folded further (double folded) to add extra cargo area. They can be turned around, encouraging conversation and can be sided forward and backward. It was produced with petrol and diesel engines, both manual and automatic transmission styles are available. In March 2014, the second generation Stavic was awarded 2014 Car of the Year - Best MPV Design by Grand Prix, the most famous automotive magazine in Thailand.
Ssangyong Rodius FAQ's
How do I check the brake fluid level on a Ssangyong Rodius?
To check the brake fluid level on a Ssangyong Rodius, locate the brake fluid reservoir, which is typically located near the firewall on the driver's side of the engine compartment. The reservoir is transparent, allowing you to see the fluid level. Ensure the vehicle is parked on a level surface and that the engine is off. Remove the reservoir cap and visually inspect the fluid level. If it is below the "MIN" or "ADD" mark, add the recommended brake fluid until it reaches the proper level.
How do I check the engine oil level on a Ssangyong Rodius?
To check the engine oil level on a Ssangyong Rodius, park the vehicle on a level surface and wait for the engine to cool down. Locate the engine oil dipstick, remove it, and wipe it clean. Insert the dipstick back into its tube completely and then pull it out again to read the oil level. If the level is below the recommended range, add the appropriate type and amount of oil.
How do I check the power steering fluid level on a Ssangyong Rodius?
To check the power steering fluid level on a Ssangyong Rodius, locate the power steering fluid reservoir, which is typically near the front of the engine compartment. The reservoir is usually transparent, allowing you to easily see the fluid level. With the engine off, remove the reservoir cap and visually inspect the fluid level. If it is below the "MIN" or "ADD" mark, add the recommended power steering fluid until it reaches the proper level.
How do I check the transmission fluid level on a Ssangyong Rodius?
To check the transmission fluid level on a Ssangyong Rodius, start the engine and let it idle for a few minutes to warm up. Locate the transmission dipstick, which is usually near the back of the engine compartment. With the engine running, remove the dipstick, wipe it clean, reinsert it fully, and then pull it out again to read the fluid level. The level should be within the designated range on the dipstick. If needed, add the recommended transmission fluid through the dipstick tube.
How do I replace a cabin air filter on a Ssangyong Rodius?
To replace the cabin air filter on a Ssangyong Rodius, locate the filter housing, which is usually located behind the glove compartment or under the dashboard. Open the housing cover and remove the old filter by pulling it straight out. Insert the new filter, making sure it is properly aligned with the airflow direction marked on the filter. Close the housing cover securely, ensuring a tight seal.
How do I replace a fuel filter on a Ssangyong Rodius?
To replace a fuel filter on a Ssangyong Rodius, start by relieving the fuel system pressure by disconnecting the fuel pump or fuel pump relay. Locate the fuel filter, which is usually attached to the fuel line under the vehicle or in the engine compartment. Use appropriate tools to disconnect the inlet and outlet fuel lines from the filter. Remove the old filter and install the new one, ensuring proper alignment and secure connections. Lastly, reconnect the fuel pump or fuel pump relay and test for any fuel leaks.
How do I replace a headlight bulb on a Ssangyong Rodius?
To replace a headlight bulb on a Ssangyong Rodius, start by opening the hood and locating the back of the headlight assembly. Disconnect the electrical connector from the bulb, then twist and remove the bulb socket from the assembly. Replace the old bulb with a new one of the same type, ensuring it is securely seated. Reconnect the electrical connector and test the headlight before closing the hood.
How do I replace a spark plug on a Ssangyong Rodius?
To replace a spark plug on a Ssangyong Rodius, start by locating the spark plug wires or coil packs, which are usually attached to the top of the engine. Disconnect the wire or coil pack from the spark plug and use an appropriate spark plug socket and extension to remove the old spark plug. Check the gap on the new spark plug, if necessary, and then install it using the socket and extension. Reconnect the wire or coil pack and repeat the process for each spark plug.
How do I replace a windshield wiper blade on a Ssangyong Rodius?
To replace a windshield wiper blade on a Ssangyong Rodius, lift the wiper arm away from the windshield and locate the small tab or release mechanism on the blade. Press or slide the tab to release the old blade from the wiper arm. Align the new blade's adapter with the wiper arm hook, then firmly press the blade until it clicks into place. Gently lower the wiper arm back onto the windshield.
How do I reset the maintenance light on a Ssangyong Rodius?
To reset the maintenance light on a Ssangyong Rodius, turn the ignition switch to the "ON" position without starting the engine. Fully press the accelerator pedal three times within five seconds and then release it. The maintenance light should start flashing, indicating that the reset procedure was successful. Turn off the ignition and then start the engine to ensure the light is no longer illuminated.
How often should I change the engine oil on a Ssangyong Rodius?
It is recommended to change the engine oil on a Ssangyong Rodius every 5,000 to 7,500 miles or every 6 months, whichever comes first. Regular oil changes help maintain the engine's performance and prolong its lifespan. Always refer to the vehicle's manual for the manufacturer's specific recommendations on oil change intervals and the type of oil to use.
What is the recommended tire pressure for a Ssangyong Rodius?
The recommended tire pressure for a Ssangyong Rodius can vary depending on the specific model and tire size. However, a general guideline would be to maintain the tire pressure between 32-36 psi (pounds per square inch) for all four tires. It is important to regularly check and adjust the tire pressure to ensure optimal handling, fuel efficiency, and tire longevity.
What should I do if the battery of my Ssangyong Rodius is dead?
If the battery of your Ssangyong Rodius is dead, you can jump-start the vehicle using jumper cables and a functioning vehicle. Connect the positive (+) terminal of the dead battery to the positive terminal of the live battery, then connect the negative (-) terminal of the live battery to a suitable ground point on the dead vehicle. Start the engine of the live vehicle and let it run for a few minutes, then attempt to start the Ssangyong Rodius. If successful, let the engine run for a while to recharge the battery.
What type of coolant should I use in a Ssangyong Rodius?
When adding or replacing coolant in a Ssangyong Rodius, it is important to use the recommended coolant type specified by the manufacturer. Typically, this would be a high-quality ethylene glycol-based coolant with the appropriate blend of additives. Using the correct coolant helps prevent overheating, corrosion, and freezing of the engine cooling system.
Get notified for new manuals?
We'll send you a quick email when a new Ssangyong Rodius manual is added.