Toyota IQ Workshop Manuals and Repair Manuals
Every Manual available online - found by our community and shared for FREE. Enjoy!
Toyota IQ
The Toyota iQ is a transverse-engine, front-wheel-drive city car manufactured by Toyota in a single generation since 2008 and marketed since 2011 in the US and since 2012 in Canada as the Scion iQ. Following a concept vehicle presented at the 2007 Frankfurt Auto Show, the production iQ debuted at the March 2008 Geneva Auto Show. Japanese sales began in October 2008 and European sales in January 2009. It is manufactured with manual and automatic gearbox, and available with various petrol and diesel engines.Toyota IQ FAQ's
How can I check the transmission fluid level in a Toyota IQ?
To check the transmission fluid level in a Toyota IQ, start the engine and allow it to idle. Locate the transmission dipstick, usually near the back of the engine bay. With the engine running, pull out the dipstick, wipe it clean, reinsert it fully, and then remove it again. Check the fluid level on the dipstick and ensure it falls within the appropriate range.
How can I reset the maintenance required light in a Toyota IQ?
To reset the maintenance required light in a Toyota IQ, turn the ignition key to the "off" position. Press and hold the trip meter reset button while turning the ignition key to the "on" position. Continue holding the button until the maintenance light goes off, indicating that the reset is complete. It is important to note that resetting the maintenance light does not replace the need for regular maintenance.
How do I check the battery condition in a Toyota IQ?
To check the battery condition in a Toyota IQ, start by turning off all electrical accessories and removing the key from the ignition. Open the hood and locate the battery. Inspect the battery for any signs of corrosion or damage. Use a voltmeter to measure the battery voltage; a fully charged battery should read around 12.6 volts or higher. If the voltage is significantly lower, it may indicate a weak or discharged battery that needs to be charged or replaced.
How do I check the tire pressure in a Toyota IQ?
To check the tire pressure in a Toyota IQ, start by locating the tire pressure label on the driver's side door jamb or in the owner's manual. Remove the valve cap from the tire, then use a tire pressure gauge to measure the pressure. Compare the reading with the recommended pressure listed on the label or in the manual, and adjust the pressure accordingly.
How do I jump-start a Toyota IQ?
To jump-start a Toyota IQ, park a vehicle with a charged battery next to the IQ. Connect the positive (red) jumper cable to the positive terminal of the dead battery, then connect the other end to the positive terminal of the charged battery. Connect the negative (black) jumper cable to the negative terminal of the charged battery, and the other end to a metal part of the dead vehicle's engine. Start the charged vehicle and let it run for a few minutes, then attempt to start the Toyota IQ.
How do I replace a burned-out headlight bulb in a Toyota IQ?
To replace a burned-out headlight bulb in a Toyota IQ, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector from the bulb, then twist the bulb counterclockwise to remove it. Install the new bulb by inserting it into the socket and twisting it clockwise until it locks. Reconnect the electrical connector and test the headlight before closing the hood.
How do I replace a faulty fuse in a Toyota IQ?
To replace a faulty fuse in a Toyota IQ, locate the fuse box, usually located under the dashboard or in the engine compartment. Identify the fuse that corresponds to the affected circuit and use a fuse puller or a pair of needle-nose pliers to remove the fuse. Inspect the fuse to determine if it is blown; a blown fuse will have a broken filament. Replace the fuse with a new one of the same amperage rating and ensure it is securely seated in the fuse box.
How do I replace the windshield wiper blades on a Toyota IQ?
To replace the windshield wiper blades on a Toyota IQ, lift the wiper arm away from the windshield, then locate the release tab or button on the wiper blade assembly. Press or squeeze the tab/button to release the blade, then slide it off the wiper arm. Install the new blade by aligning the adapter or hook with the wiper arm and pushing it until it clicks into place.
How often should the brake fluid be replaced in a Toyota IQ?
The brake fluid in a Toyota IQ should be replaced every 2 years or 30,000 miles, whichever comes first. Over time, brake fluid can absorb moisture, which can lead to reduced braking performance and potential damage to the brake system. Regular replacement of the brake fluid helps maintain proper braking function and ensure safety.
How often should the oil be changed in a Toyota IQ?
The oil in a Toyota IQ should be changed every 5,000 miles or every 6 months, whichever comes first. Regular oil changes are essential to maintain the engine's performance and prolong its lifespan. Neglecting to change the oil can lead to engine damage and decreased fuel efficiency.
What is the recommended interval for air filter replacement in a Toyota IQ?
The air filter in a Toyota IQ should be replaced every 15,000 to 30,000 miles, depending on driving conditions and air quality. The air filter prevents dust, dirt, and debris from entering the engine, and a clogged filter can restrict airflow and adversely affect fuel efficiency and engine performance. Regular air filter replacement ensures optimal engine performance and extends the lifespan of engine components.
What is the recommended interval for timing belt replacement in a Toyota IQ?
The timing belt in a Toyota IQ should be replaced every 60,000 miles or 5 years, whichever comes first. The timing belt plays a crucial role in synchronizing the engine's valves and pistons, and failure to replace it at the recommended interval can result in severe engine damage. Regular timing belt replacement is essential for the vehicle's overall reliability and performance.
What is the recommended tire rotation pattern for a Toyota IQ?
Toyota recommends rotating the tires on a Toyota IQ in a forward cross pattern. This means that the front tires are moved straight to the back, while the rear tires are moved diagonally to the front. Regular tire rotations help promote even tire wear, extend tire life, and maintain optimal traction and handling.
What type of coolant should be used in a Toyota IQ?
Toyota recommends using a high-quality ethylene glycol-based coolant with corrosion inhibitors for the Toyota IQ. It is important to choose a coolant that meets the specifications outlined in the vehicle's owner's manual. Using the correct coolant ensures optimal cooling system performance and helps prevent engine overheating.
What type of engine oil filter should be used in a Toyota IQ?
Toyota recommends using a genuine OEM oil filter or a high-quality aftermarket oil filter that meets the specifications outlined in the vehicle's owner's manual. Choosing the right oil filter is crucial to ensure proper filtration and protect the engine from contaminants. Using a substandard or incorrect oil filter can lead to engine damage and reduced performance.
Toyota IQ Owners Manual
-
- Toyota IQ 2013 Owner's Manual
- (372 Pages)
- (Free)
-
- Toyota IQ 2014 Owner's Manual
- (376 Pages)
- (Free)
Related Models