Toyota FJ62 Free Workshop and Repair Manuals

To change the oil in your Toyota FJ62, start by placing a drain pan under the oil drain plug and removing the plug to drain the old oil. Once the oil has fully drained, replace the drain plug and remove the old oil filter. Install a new oil filter and add the recommended amount of fresh oil to the engine. Double-check for any leaks and dispose of the old oil properly.

To replace a blown fuse in your Toyota FJ62, locate the fuse box, which is usually located under the dashboard or in the engine compartment. Once you’ve found the fuse box, use the fuse diagram on the cover or in the owner’s manual to identify the specific fuse that needs to be replaced. Carefully remove the blown fuse using a fuse puller or needle-nose pliers and replace it with a new fuse of the same amperage rating.

It is generally recommended to change the spark plugs in your Toyota FJ62 every 30,000 to 45,000 miles or as specified in the owner’s manual. However, this interval may vary depending on factors such as driving conditions and the type of spark plugs being used. Regularly inspect the spark plugs for signs of wear or fouling, and replace them if necessary to ensure optimal engine performance.

The recommended tire pressure for your Toyota FJ62 can usually be found on a sticker located on the driver’s door jamb or in the owner’s manual. It is important to follow the manufacturer’s recommended tire pressure to ensure proper tire wear, fuel efficiency, and handling characteristics. Remember to check the tire pressure regularly, especially before long drives or when carrying heavy loads.

For your Toyota FJ62, it is recommended to use a long-life ethylene glycol-based coolant with a 50/50 mix of coolant and distilled water. This coolant should meet the specifications outlined in the owner’s manual and have the proper anti-corrosion additives to protect the engine from rust and corrosion. Avoid using plain water or mixing different types of coolant as it can lead to cooling system issues.