The BMW 128i is a BMW 1 Series E87 model with 3.0L, six-cylinder petrol engine (230 HP), available in coupe and convertible body styles, limited to the North American market. The first-generation BMW 1 Series is a compact executive car produced by the German automaker BMW since 2004, when it replaced the BMW 3 Series Compact as the smallest and least expensive vehicle in the BMW range. The 3-door and 5-door hatchbacks were replaced by the F20 and F21 models in 2012, while the E82 coupé and E88 convertible variants were replaced by the 2 Series F22 and F23 in 2013.Available in 3-door hatchback (model code E81), 5-door hatchback (E87), coupe (E82) and 2-door convertible (E88) body styles, the 1 Series features a rear-wheel drive chassis, 50:50 weight balance, longitudinally-mounted engine and aluminum multilink suspension as well as a range of petrol and diesel engines. The 1 Series accounted for nearly one-fifth of the total BMW sales in 2008.
Frequently Asked Questions
How do I change the air filter on a BMW 128i?
Changing the air filter on a BMW 128i is a simple process that can be done in a few steps. First, locate the air filter housing under the hood of the car. Open the housing and remove the old air filter. Replace it with a new one and ensure that it is properly secured.
How do I change the brake pads on a BMW 128i?
Changing the brake pads on a BMW 128i is a simple process that can be done in a few steps. First, locate the brake caliper and remove it. Remove the old brake pads and replace them with new ones. Reattach the brake caliper and ensure that it is properly secured.
How do I change the spark plugs on a BMW 128i?
Changing the spark plugs on a BMW 128i is a simple process that can be done in a few steps. First, locate the spark plug wires and remove them. Use a spark plug socket to remove the old spark plugs. Replace them with new ones and tighten them to the recommended torque setting. Reattach the spark plug wires.
How do I check the brake fluid on a BMW 128i?
Checking the brake fluid on a BMW 128i is a simple process that can be done in a few steps. First, locate the brake fluid reservoir under the hood of the car. The fluid level should be between the “MIN” and “MAX” marks on the reservoir. If it is low, add the recommended brake fluid to bring it to the proper level.
How do I check the coolant level on a BMW 128i?
Checking the coolant level on a BMW 128i is a simple process that can be done in a few steps. First, locate the coolant reservoir under the hood of the car. The fluid level should be between the “MIN” and “MAX” marks on the reservoir. If it is low, add the recommended coolant to bring it to the proper level.
How do I check the transmission fluid on a BMW 128i?
Checking the transmission fluid on a BMW 128i is a simple process that can be done in a few steps. First, locate the transmission dipstick under the hood of the car. Remove the dipstick and wipe it clean. Reinsert it and remove it again to check the fluid level. The fluid level should be between the “MIN” and “MAX” marks on the dipstick.
How do I replace a headlight bulb on a BMW 128i?
Replacing a headlight bulb on a BMW 128i is a simple process that can be done in a few steps. First, locate the headlight assembly under the hood of the car. Remove the old bulb by twisting it counterclockwise and pulling it out. Insert the new bulb and secure it by twisting it clockwise.
How do I replace the battery on a BMW 128i?
Replacing the battery on a BMW 128i is a simple process that can be done in a few steps. First, locate the battery under the hood of the car. Disconnect the negative cable first, then the positive cable. Remove the battery and replace it with a new one. Connect the positive cable first, then the negative cable.
How do I replace the cabin air filter on a BMW 128i?
Replacing the cabin air filter on a BMW 128i is a simple process that can be done in a few steps. First, locate the cabin air filter housing under the dashboard on the passenger side of the car. Remove the old filter and replace it with a new one. Ensure that the filter is properly secured in the housing.
How do I replace the serpentine belt on a BMW 128i?
Replacing the serpentine belt on a BMW 128i is a simple process that can be done in a few steps. First, locate the belt tensioner and release it. Remove the old belt and replace it with a new one. Reengage the belt tensioner and ensure that the belt is properly tensioned.
How do I replace the wiper blades on a BMW 128i?
Replacing the wiper blades on a BMW 128i is a simple process that can be done in a few steps. First, lift the wiper arm away from the windshield. Press the release tab on the wiper blade and slide it off the arm. Slide the new wiper blade onto the arm and ensure that it is properly secured.
How do I reset the service indicator on a BMW 128i?
Resetting the service indicator on a BMW 128i is a simple process that can be done in a few steps. First, turn the ignition on without starting the engine. Press and hold the odometer reset button until the service indicator light is illuminated. Release the button and press it again to reset the service indicator.
How often should I change the oil in a BMW 128i?
The recommended oil change interval for a BMW 128i is every 10,000 miles or 1 year, whichever comes first. However, some driving conditions may require more frequent oil changes. Always check the owner’s manual for specific recommendations and follow the manufacturer’s guidelines.
What is the recommended tire pressure for a BMW 128i?
The recommended tire pressure for a BMW 128i is 32 psi for all four tires. It is important to check tire pressure regularly to ensure optimal performance and safety. Use a tire pressure gauge to measure pressure and adjust as necessary.
What type of oil should I use for a BMW 128i?
It is recommended to use a synthetic oil with a viscosity of 5W-30 for a BMW 128i. This type of oil provides the best performance and protection for the engine. Always check the owner’s manual for specific recommendations and follow the manufacturer’s guidelines.
BMW 128i Related Models