The BMW 2 Series Active Tourer is a compact MPV produced by the German manufacturer BMW since 2014, and marketed as part of the 2 Series lineup. It is the first front-engine, front-wheel-drive layout vehicle sold under BMW vehicle brand, designed to compete directly with the Mercedes-Benz B-Class. The design is based on the BMW Concept Active Tourer, and is mechanically related to the MINI Countryman, also built by BMW. The vehicle was unveiled in 2012 Paris Motor Show. BMW 225i is manufactured with both petrol and diesel versions, with 1,995 cc engines in both. It is available as six-speed manual or 8-speed automatic.
Frequently Asked Questions
How do I change the oil on my BMW 2 Series?
To change the oil on your BMW 2 Series, first, gather the necessary tools and materials, including a new oil filter, wrench, and drain pan. Then, locate the oil drain plug under the car and remove it to let the old oil drain out. Once the old oil has drained, replace the oil filter, tighten the drain plug, and refill the engine with new oil.
How do I check the brake fluid on my BMW 2 Series?
To check the brake fluid on your BMW 2 Series, first, locate the brake fluid reservoir under the hood. Check the fluid level and ensure that it is between the minimum and maximum marks. If the fluid level is low, add DOT 4 brake fluid and check again.
How do I check the coolant level on my BMW 2 Series?
To check the coolant level on your BMW 2 Series, first, ensure that the engine is cool. Then, locate the coolant reservoir under the hood and check the level. If the coolant level is low, add a 50/50 mixture of antifreeze and distilled water until the level reaches the maximum mark.
How do I check the tire pressure on my BMW 2 Series?
To check the tire pressure on your BMW 2 Series, first, ensure that the tires are cold. Then, locate the tire pressure label on the driver’s side door jamb and note the recommended tire pressure. Use a tire pressure gauge to measure the pressure in each tire and adjust as needed.
How do I jump-start my BMW 2 Series?
To jump-start your BMW 2 Series, first, ensure that both vehicles are turned off. Then, connect the positive cable to the positive terminal of the dead battery and the other end of the cable to the positive terminal of the donor battery. Next, connect the negative cable to the negative terminal of the donor battery and the other end of the cable to a grounded metal surface on the dead car. Start the donor vehicle and let it run for a few minutes before attempting to start the dead car.
How do I replace the air filter on my BMW 2 Series?
To replace the air filter on your BMW 2 Series, first, locate the air filter housing under the hood. Open the housing and remove the old air filter, making note of the orientation. Then, insert the new air filter in the correct orientation and close the housing.
How do I replace the battery on my BMW 2 Series?
To replace the battery on your BMW 2 Series, first, locate the battery under the hood or in the trunk. Then, disconnect the negative cable followed by the positive cable and any holding brackets. Remove the old battery and install the new battery, reconnecting the positive cable followed by the negative cable and any holding brackets.
How do I replace the brake pads on my BMW 2 Series?
To replace the brake pads on your BMW 2 Series, first, gather the necessary tools and materials, including a new set of brake pads, a jack, and jack stands. Then, remove the wheels and caliper, and carefully remove the old brake pads. Install the new brake pads, reassemble the caliper and wheels, and test the brakes.
How do I replace the cabin air filter on my BMW 2 Series?
To replace the cabin air filter on your BMW 2 Series, first, locate the filter housing under the dash on the passenger side. Open the housing and carefully remove the old filter, making note of the orientation. Then, insert the new filter in the correct orientation and close the housing.
How do I replace the spark plugs on my BMW 2 Series?
To replace the spark plugs on your BMW 2 Series, first, gather the necessary tools and materials, including a new set of spark plugs and a spark plug socket. Then, locate the spark plugs under the hood and carefully remove them using the socket. Install the new spark plugs and torque them to the manufacturer’s specifications.
How do I replace the windshield wiper blades on my BMW 2 Series?
To replace the windshield wiper blades on your BMW 2 Series, first, lift the wiper arm away from the windshield. Then, press the small tab on the underside of the wiper blade and slide it off the arm. Install the new wiper blade in the reverse order.
How do I reset the maintenance light on my BMW 2 Series?
To reset the maintenance light on your BMW 2 Series, first, turn the ignition to the “on” position without starting the engine. Use the arrows on the turn signal lever to select “vehicle status” on the instrument cluster. Then, press and hold the BC button on the end of the turn signal lever until the reset option appears. Select “reset” and confirm the reset by pressing the BC button again.
How often should I change the spark plugs on my BMW 2 Series?
The spark plugs on your BMW 2 Series should be replaced every 60,000 to 100,000 miles or as needed. Signs that your spark plugs may need to be replaced include rough idling, misfiring, and decreased fuel economy.
How often should I replace the brake pads on my BMW 2 Series?
The brake pads on your BMW 2 Series should be replaced every 30,000 to 70,000 miles or as needed. Signs that your brake pads may need to be replaced include squeaking or grinding noises when braking, a pulsating brake pedal, or reduced braking performance.
What type of oil should I use in my BMW 2 Series?
The type of oil you should use in your BMW 2 Series depends on the model and year of your car. However, most BMW 2 Series models require synthetic oil with a viscosity of 0W-20 or 5W-30. You can find the specific oil requirements for your vehicle in the owner’s manual or on the oil cap.
BMW BMW 2 Series Related Models