The BMW 2 Series Coup? and Cabrio are luxury compact coup?s and convertibles manufactured by German automaker BMW since 2013; they are part of the 2 Series lineup. The BMW 228i was model added in summer 2014. It is available in petrol version; its engine type is 1997 cc. It is available as 6-speed manual or 8-speed sport automatic. As part of BMW i Brand Campaign in the US, a BMW 2 Series TV commercial titled ‘Torch’ was premiered leading up to and during NBC’s broadcast of the Sochi 2014 Olympic Winter Games.
Frequently Asked Questions
How do I change the oil in my BMW 228?
Changing the oil in your BMW 228 should be done every 7,500 miles. To change the oil, first warm up the engine and then turn it off. Locate the oil drain plug under the car and remove it, letting the old oil drain into a container. Replace the drain plug and then add new oil to the engine.
How do I check the oil level in my BMW 228?
Checking the oil level in your BMW 228 is important to ensure proper engine function. To check the oil level, park your car on a level surface and wait for the engine to cool down. Then, locate the dipstick in the engine compartment and remove it. Wipe it clean and reinsert it to check the oil level.
How do I check the transmission fluid in my BMW 228?
To check the transmission fluid in your BMW 228, start the engine and let it idle for a few minutes. Then, locate the transmission dipstick and remove it. Wipe it clean and reinsert it to check the fluid level.
How do I replace the air filter in my BMW 228?
The air filter in your BMW 228 needs to be replaced every 30,000 miles. To replace it, locate the air filter housing next to the engine and remove the clips or screws that hold it in place. Once the housing is open, simply remove the old filter and replace it with a new one.
How do I replace the alternator on my BMW 228?
To replace the alternator on your BMW 228, first disconnect the negative battery cable. Then, locate the alternator and remove the bolts that hold it in place. Disconnect the wiring harness and remove the old alternator. Replace it with a new one and reconnect the wiring harness and bolts.
How do I replace the battery in my BMW 228?
To replace the battery in your BMW 228, first turn off the engine and locate the battery in the engine compartment. Remove the negative cable from the battery and then the positive cable. Then, remove the battery hold-down clamp and lift out the old battery. Replace it with a new one and reconnect the cables.
How do I replace the brake pads on my BMW 228?
To replace the brake pads on your BMW 228, first loosen the lug nuts on the wheels and then jack up the car and remove the wheels. Locate the brake caliper and remove the bolts that hold it in place. Then, remove the old brake pads and replace them with new ones.
How do I replace the cabin air filter on my BMW 228?
To replace the cabin air filter on your BMW 228, locate the filter housing under the passenger side of the dashboard. Open the housing and remove the old filter. Then, replace it with a new one and close the housing.
How do I replace the fuel filter in my BMW 228?
To replace the fuel filter in your BMW 228, first locate the filter under the car near the fuel tank. Then, remove the clamps or screws that hold the filter in place and remove the old filter. Replace it with a new one and secure it with the clamps or screws.
How do I replace the headlights on my BMW 228?
To replace the headlights on your BMW 228, first disconnect the negative battery cable. Then, remove the cover on the back of the headlight assembly and unplug the wiring harness. Remove the old headlight and replace it with a new one. Finally, reconnect the wiring harness and replace the cover.
How do I replace the oxygen sensor on my BMW 228?
To replace the oxygen sensor on your BMW 228, first locate the sensor near the exhaust manifold. Disconnect the wiring harness and unscrew the old sensor. Replace it with a new one and reconnect the wiring harness.
How do I replace the serpentine belt on my BMW 228?
To replace the serpentine belt on your BMW 228, locate the tensioner pulley and use a wrench to release the tension on the belt. Then, remove the old belt and replace it with a new one. Finally, use the tensioner pulley to tighten the belt.
How do I replace the spark plugs in my BMW 228?
To replace the spark plugs in your BMW 228, first locate the spark plug wires and remove them from the plugs. Then, use a spark plug socket to remove the old plugs and replace them with new ones. Finally, reconnect the spark plug wires.
How do I replace the thermostat on my BMW 228?
To replace the thermostat on your BMW 228, first wait for the engine to cool down. Then, locate the thermostat housing and remove the bolts that hold it in place. Remove the old thermostat and replace it with a new one. Finally, replace the housing and bolts.
How do I replace the wiper blades on my BMW 228?
To replace the wiper blades on your BMW 228, lift the wiper arm away from the windshield and press the small tab on the underside of the wiper blade to release it from the arm. Then, slide the new blade onto the arm until it clicks into place.
BMW 228 Related Models