Mercedes launched a cabriolet (convertible) version in Europe in 1991, the 300CE-24 cabriolet, and in the UK (RHD) and Japan (LHD). The 320CE, and North America, the 300CE, in 1992. The W124 320 CE had 3199 ccm engine, 6 inline cylinders, with rated power output of 162 kW or 220 hp. Gearing was handled by 5 speed manual transmission or 4 speed automatic planetary gear, reaching maximum speed at 235 km/h with 0-100 acceleration in 8 seconds. Stylistically the Coupes of the 124 series display their affinity to the Saloon, presenting themselves with the same composed, clear lines for which chief designer Bruno Sacco was responsible. And yet their looks make them cars in their own right: the Coup?s are a little shorter than the corresponding Saloons, are designed as two-doors, and their windscreen and rear window have a flatter angle. These stylistic features emphasize the character of these exclusive vehicles.
Frequently Asked Questions
How do I change a flat tire on my Mercedes CE 320?
To change a flat tire on your Mercedes CE 320, start by safely parking the vehicle on a flat surface away from traffic. Locate the spare tire, jack, and lug wrench, which are typically found in the trunk. Use the lug wrench to loosen the lug nuts, then use the jack to lift the vehicle off the ground. Remove the lug nuts, take off the flat tire, and replace it with the spare tire. Tighten the lug nuts, lower the vehicle, and then fully tighten the lug nuts in a star pattern.
How do I check the brake fluid level in my Mercedes CE 320?
To check the brake fluid level in your Mercedes CE 320, locate the brake fluid reservoir, which is typically located near the firewall on the driver’s side of the engine compartment. Make sure the vehicle is parked on a level surface and remove the cap from the reservoir. The brake fluid level should be between the MIN and MAX marks on the side of the reservoir. If the fluid level is low, carefully add the recommended brake fluid to bring it to the proper level. Be cautious not to spill brake fluid on any painted surfaces as it can cause damage.
How do I check the tire pressure on my Mercedes CE 320?
To check the tire pressure on your Mercedes CE 320, you can use a tire pressure gauge. Unscrew the valve cap on each tire, firmly press the gauge onto the valve stem, and read the pressure displayed on the gauge. Compare the measured pressure to the recommended tire pressure listed in your vehicle’s manual. Adjust the tire pressure accordingly by adding or releasing air, and make sure to check all four tires, including the spare tire.
How do I jump-start my Mercedes CE 320?
To jump-start your Mercedes CE 320, you will need a set of jumper cables and another vehicle with a fully charged battery. Park the two vehicles close enough for the jumper cables to reach both batteries. Connect the positive (+) terminal of the dead battery to the positive terminal of the fully charged battery. Then connect the negative (-) terminal of the fully charged battery to a metal grounding point on the engine block of the dead vehicle, away from the battery. Start the engine of the vehicle with the fully charged battery, let it run for a few minutes, and then attempt to start your Mercedes CE 320. Once started, remove the jumper cables in the reverse order of connection.
How do I replace a headlight bulb on my Mercedes CE 320?
To replace a headlight bulb on your Mercedes CE 320, start by opening the hood and locating the back of the headlight assembly. Disconnect the electrical connector by gently pressing the release tab and pulling it away. Twist the bulb socket counterclockwise to remove it from the headlight assembly and carefully pull out the old bulb. Insert the new bulb into the socket, reattach the socket to the headlight assembly, and reconnect the electrical connector. Finally, test the new headlight bulb by turning on the headlights.
How do I replace the windshield wiper blades on my Mercedes CE 320?
To replace the windshield wiper blades on your Mercedes CE 320, lift the wiper arm away from the windshield and locate the release tab on the wiper blade assembly. Press the release tab and slide the old wiper blade out of the wiper arm. Align the new wiper blade with the wiper arm and slide it into place until it clicks securely. Gently lower the wiper arm back onto the windshield. Test the new wiper blades by turning on the wipers and ensuring they clean the windshield effectively without streaking.
How do I reset the maintenance indicator on my Mercedes CE 320?
To reset the maintenance indicator on your Mercedes CE 320, start by turning the ignition to the “ON” position without starting the engine. Within four seconds, press the trip odometer reset button twice, and then turn the ignition off. After that, press and hold the trip odometer reset button while turning the ignition back to the “ON” position. Continue holding the button until the maintenance indicator resets.
How often should I change the oil in my Mercedes CE 320?
It is recommended to change the oil in your Mercedes CE 320 every 7,500 miles or every 12 months, whichever comes first. Regular oil changes are essential to maintain the longevity and performance of your vehicle’s engine. Neglecting to change the oil on time can lead to engine damage and increased wear and tear.
How often should I replace the air filter in my Mercedes CE 320?
The air filter in your Mercedes CE 320 should be replaced approximately every 30,000 miles or as recommended by the manufacturer. A clean air filter is crucial for proper air flow to the engine, ensuring optimal fuel combustion and engine performance. Neglecting to replace a dirty air filter can lead to reduced fuel efficiency and potentially cause damage to the engine over time.
How often should I replace the cabin air filter in my Mercedes CE 320?
The cabin air filter in your Mercedes CE 320 should be replaced approximately every 15,000 to 20,000 miles or as recommended by the manufacturer. A clean cabin air filter improves the air quality inside the vehicle’s cabin by filtering out dust, pollen, and other particles. Regular replacement of the cabin air filter helps maintain a comfortable and healthy driving environment.
How often should I replace the spark plugs in my Mercedes CE 320?
The spark plugs in your Mercedes CE 320 should be replaced approximately every 60,000 to 100,000 miles or as recommended by the manufacturer. Fresh spark plugs ensure proper ignition and combustion, resulting in optimal engine performance and fuel efficiency. Regularly replacing the spark plugs also helps prevent misfires, rough idling, and potential damage to the ignition system.
How often should I rotate the tires on my Mercedes CE 320?
The tires on your Mercedes CE 320 should be rotated approximately every 5,000 to 7,500 miles or as recommended by the manufacturer. Regular tire rotations help ensure even wear on all tires, extending their lifespan and maintaining optimal traction and handling performance. It is also a good opportunity to inspect the tires for any signs of damage or uneven wear patterns.
What is the recommended tire pressure for my Mercedes CE 320?
The recommended tire pressure for your Mercedes CE 320 can be found in the vehicle’s manual or on a sticker located on the driver’s side door jamb or inside the fuel filler door. It is important to maintain the recommended tire pressure to ensure proper handling, tire longevity, and fuel efficiency. Remember to check the tire pressure when the tires are cold for accurate readings.
What type of coolant should I use in my Mercedes CE 320?
The Mercedes CE 320 requires a specific type of coolant, which is the Mercedes-Benz Genuine Antifreeze/Coolant. This coolant is specially formulated to meet the requirements of your vehicle’s cooling system. It is important to use the correct coolant to prevent any potential damage to the engine and ensure optimal cooling performance.
What type of engine oil should I use in my Mercedes CE 320?
The recommended engine oil for your Mercedes CE 320 is the Mercedes-Benz Genuine Engine Oil, which meets the specifications listed in your vehicle’s manual. Using the correct engine oil ensures proper lubrication, protects against engine wear, and maintains optimal engine performance and fuel efficiency. It is important to check the oil level regularly and top it up when needed with the recommended oil.
