The Chevrolet Malibu I a mid-size car manufactured by General Motors in the periods of 1964 to 1983 and from 1997 till even today. Originally a rear-wheel-drive intermediate, GM revived the Malibu nameplate as a front-wheel-drive car in 1997 Named after the city of Malibu, California, the Malibu was marketed primarily in North America, with the eighth generation marketed globally. The Malibu was an extensively used body style in NASCAR competition from 1973 to 1983.
Frequently Asked Questions
How do I bleed the brakes on a Chevrolet Malibu?
To bleed the brakes on a Chevrolet Malibu, start with the brake farthest from the master cylinder and work your way closer. Have a helper pump the brake pedal several times and hold it down while you release the bleeder valve on the brake caliper. Watch for air bubbles to come out, then tighten the valve. Repeat this process until no more air bubbles come out and the brake pedal feels firm.
How do I change the brake pads on a Chevrolet Malibu?
To change the brake pads on a Chevrolet Malibu, remove the wheel and locate the brake caliper. Use a C-clamp to push the caliper piston back into the caliper. Remove the caliper bolts and slide the caliper off the rotor. Remove the old brake pads and install the new ones. Reinstall the caliper and bolts, then pump the brake pedal until it feels firm.
How do I check the coolant level on a Chevrolet Malibu?
To check the coolant level on a Chevrolet Malibu, wait for the engine to cool down and park the car on a level surface. Open the hood and locate the coolant reservoir. The coolant level should be between the “Full” and “Low” marks on the reservoir. If it is low, add more coolant as needed.
How do I check the tire pressure on a Chevrolet Malibu?
To check the tire pressure on a Chevrolet Malibu, use a tire pressure gauge to measure the pressure in each tire. The recommended tire pressure can be found on a sticker in the driver’s side door jamb or in the owner’s manual. If the pressure is too low, add air until it reaches the recommended level.
How do I check the transmission fluid level on a Chevrolet Malibu?
To check the transmission fluid level on a Chevrolet Malibu, park the car on a level surface, engage the handbrake, and wait for the engine to cool down. Remove the dipstick from the transmission and wipe it clean. Reinsert the dipstick and remove it again to check the fluid level. If the fluid is below the recommended level, add more as necessary.
How do I replace a headlight bulb on a Chevrolet Malibu?
To replace a headlight bulb on a Chevrolet Malibu, open the hood and locate the back of the headlight assembly. Twist the headlight bulb counterclockwise and remove it from the assembly. Install the new bulb by twisting it clockwise into the assembly. Test the new bulb to make sure it works before closing the hood.
How do I replace the air filter on a Chevrolet Malibu?
To replace the air filter on a Chevrolet Malibu, open the hood and locate the air filter housing. Release the clips or screws holding the housing together and remove the old filter. Install the new filter, making sure it fits snugly in the housing. Reattach the clips or screws to hold the housing together.
How do I replace the alternator on a Chevrolet Malibu?
To replace the alternator on a Chevrolet Malibu, disconnect the negative battery cable and locate the alternator under the hood. Remove the serpentine belt and any electrical connections to the alternator. Remove the bolts holding the alternator in place and remove the old alternator. Install the new alternator and reconnect the electrical connections and serpentine belt. Reconnect the negative battery cable.
How do I replace the battery on a Chevrolet Malibu?
To replace the battery on a Chevrolet Malibu, open the hood and locate the battery. Disconnect the negative cable first, then the positive cable. Remove the battery hold-down clamp and lift the battery out. Install the new battery, making sure it is securely held down. Reattach the cables, positive first then negative.
How do I replace the cabin air filter on a Chevrolet Malibu?
To replace the cabin air filter on a Chevrolet Malibu, locate the cabin air filter housing under the dashboard on the passenger side. Release the clips or screws holding the housing together and remove the old filter. Install the new filter, making sure it fits snugly in the housing. Reattach the clips or screws to hold the housing together.
How do I replace the fuel filter on a Chevrolet Malibu?
To replace the fuel filter on a Chevrolet Malibu, locate the fuel filter under the car near the fuel tank. Release the fuel pressure by removing the fuel pump fuse and starting the engine until it stalls. Disconnect the fuel lines from the filter and remove the old filter. Install the new filter and reconnect the fuel lines. Replace the fuel pump fuse and start the engine to make sure there are no leaks.
How do I replace the serpentine belt on a Chevrolet Malibu?
To replace the serpentine belt on a Chevrolet Malibu, locate the tensioner pulley and use a wrench to release the tension. Slide the old belt off the pulleys and install the new one. Make sure the belt is routed correctly around all the pulleys. Use the wrench to release the tensioner and tighten the belt.
How do I replace the spark plugs on a Chevrolet Malibu?
To replace the spark plugs on a Chevrolet Malibu, locate the spark plug wires and follow them to the spark plugs. Use a spark plug socket and ratchet to remove the old spark plugs. Install the new spark plugs, tightening them to the recommended torque. Reattach the spark plug wires in the correct order.
What type of oil should I use for my Chevrolet Malibu?
The type of oil you should use for your Chevrolet Malibu depends on the engine. For the 1.5-liter and 2.0-liter engines, use SAE 0W-20 oil. For the 1.8-liter engine, use SAE 5W-30 oil. Make sure to use oil that meets the GM dexos1? specification and change it every 7,500 miles or as recommended by the manufacturer.
Chevrolet Malibu Related Models