The Nissan S130 is a sports coup? produced by Nissan in Japan from 1978 to 1983. It was sold as the Datsun 280ZX, Nissan Fairlady Z and Nissan Fairlady 280Z, depending on the market. In Japan, it was exclusive to Nissan Bluebird Store locations. It was the second generation Z-car, replacing the Nissan S30 in late 1978. The 280ZX was Motor Trend’s import car of the year for 1979. The 1983 Electramotive 280ZX Turbo produced over 700 hp (522 kW), and reached a terminal speed of 140 mph (230 km/h) in the standing quarter mile. The 280ZX was replaced by the Nissan 300ZX in 1984.
Frequently Asked Questions
How do I adjust the idle speed in a Nissan 280 ZX?
To adjust the idle speed in a Nissan 280 ZX, start by locating the idle speed adjustment screw, which is typically found on the throttle body. With the engine warmed up and running, turn the screw clockwise to increase the idle speed or counterclockwise to decrease it. Aim for the recommended idle speed specified in the manual, as an incorrect idle speed can lead to poor engine performance or stalling.
How do I change the oil in a Nissan 280 ZX?
To change the oil in a Nissan 280 ZX, start by warming up the engine. Then, locate the oil drain plug underneath the car and place a drain pan underneath it. Remove the plug, allowing the old oil to drain out completely. Once drained, replace the drain plug and refill the engine with the recommended amount and type of oil specified in the manual.
How do I check and top up the brake fluid in a Nissan 280 ZX?
To check and top up the brake fluid in a Nissan 280 ZX, locate the brake fluid reservoir, usually found near the firewall on the driver’s side of the engine compartment. Ensure the vehicle is parked on a level surface and the engine is cold. Remove the cap from the reservoir and check the fluid level against the “MAX” and “MIN” markings. If necessary, add the recommended brake fluid type as specified in the manual to bring it up to the appropriate level.
How do I check the tire pressure in a Nissan 280 ZX?
To check the tire pressure in a Nissan 280 ZX, start by obtaining a tire pressure gauge. Unscrew the valve cap from each tire and firmly press the gauge onto the valve stem. The gauge will display the current tire pressure. Compare this reading to the recommended pressure listed in the manual and adjust accordingly using an air compressor or by releasing air from the tire.
How do I replace a blown fuse in a Nissan 280 ZX?
To replace a blown fuse in a Nissan 280 ZX, first, locate the fuse box, which is usually found in the engine compartment or under the dashboard. Identify the fuse corresponding to the malfunctioning component by referring to the owner’s manual or the fuse box lid diagram. Use a fuse puller or a pair of needle-nose pliers to remove the blown fuse and replace it with a new one of the same amperage rating.
How do I replace a headlight bulb in a Nissan 280 ZX?
To replace a headlight bulb in a Nissan 280 ZX, open the hood and locate the back of the headlight assembly. Twist the bulb socket counterclockwise to unlock it and remove it from the assembly. Gently pull out the old bulb and insert the new bulb, being careful not to touch the glass with your bare hands. Reinsert the socket into the assembly and twist it clockwise to lock it in place.
How do I replace the windshield wipers on a Nissan 280 ZX?
To replace the windshield wipers on a Nissan 280 ZX, lift the wiper arm away from the windshield until it locks in the raised position. Locate the release tab or button on the wiper blade connector and press it to release the blade. Slide the old wiper blade off the connector and slide the new blade into place. Lower the wiper arm back onto the windshield, ensuring it is securely attached.
How do I reset the maintenance light on a Nissan 280 ZX?
To reset the maintenance light on a Nissan 280 ZX, locate the reset button typically found near the instrument panel or on the dashboard. With the ignition turned off, press and hold the reset button while turning the ignition to the “ON” position. Continue holding the button until the maintenance light starts flashing or turns off, indicating that the reset has been successful.
How do I troubleshoot an electrical issue in a Nissan 280 ZX?
When troubleshooting an electrical issue in a Nissan 280 ZX, start by checking the fuse box for any blown fuses related to the malfunctioning component. If the fuses are intact, inspect the wiring and connectors for any visible damage or loose connections. Utilize a multimeter to test for continuity and proper voltage at various points in the affected circuit. If the issue persists, consult the wiring diagrams and diagnostic procedures outlined in the repair manual for further guidance.
How often should I replace the air filter in a Nissan 280 ZX?
The air filter in a Nissan 280 ZX should be replaced every 12,000 to 15,000 miles or as specified in the manual. However, if you frequently drive in dusty or polluted environments, it might be necessary to replace it more frequently. Regularly inspect the air filter and replace it when it appears dirty or clogged to ensure proper engine performance and fuel efficiency.
How often should I replace the fuel filter in a Nissan 280 ZX?
The fuel filter in a Nissan 280 ZX should generally be replaced every 30,000 to 40,000 miles or as specified in the manual. However, if you frequently drive in areas with poor fuel quality, it is recommended to replace the fuel filter more frequently. A clogged or dirty fuel filter can lead to reduced fuel efficiency and engine performance.
How often should I replace the transmission fluid in a Nissan 280 ZX?
The transmission fluid in a Nissan 280 ZX should generally be replaced every 30,000 to 60,000 miles or as specified in the manual. However, it is important to follow the specific recommendations for your vehicle’s model and usage conditions. Regularly inspect the transmission fluid for signs of contamination or discoloration, as this may indicate the need for an earlier fluid change.
What is the recommended interval for changing the spark plugs in a Nissan 280 ZX?
The spark plugs in a Nissan 280 ZX should typically be replaced every 30,000 miles or as specified in the manual. However, it is important to inspect the spark plugs regularly for signs of wear, such as a worn electrode or excessive carbon deposits. If any of these signs are present, it is recommended to replace the spark plugs even if they haven’t reached the recommended interval.
What is the recommended interval for changing the timing belt in a Nissan 280 ZX?
The timing belt in a Nissan 280 ZX should typically be replaced every 60,000 to 90,000 miles or as specified in the manual. However, it is crucial to follow the specific recommendations for your particular model and engine type. Neglecting to replace a worn timing belt can result in severe engine damage if it breaks while the engine is running.
What type of coolant should I use for a Nissan 280 ZX?
For a Nissan 280 ZX, it is recommended to use a high-quality ethylene glycol-based coolant with a 50:50 mix of coolant and distilled water. This mixture provides optimal protection against freezing, boiling, and corrosion. Refer to the manual for the specific coolant specifications and any additional recommendations for your particular model.
Nissan 280 ZX Related Models