The Nissan Skyline R34 was introduced in 1999. In May 1998, the EN34, HR34, ER34 and BNR34 marked the introduction of the more fuel-efficient and environmentally friendly RB25DET NEO engine. The RB20E engine was discontinued in the R34 base model (GT), and the RB20DE, after last being used in the R32 Skyline, was reintroduced in updated NEO guise. The R34 GT powered by the RB20DE NEO, coupled with a five-speed gearbox, became the most fuel-efficient straight-six Skyline to date (of any shape). ” The 4-speed automatic transmission available on some models in the previous two shapes were discontinued. In its place, Nissan produced a 4-speed Tiptronic transmission for all of the automatic versions (Except the base 2.0L, which has a standard 5-speed gearbox). Only the GT-T coupe variant was sold in New Zealand and Hong Kong from 1997 to 2000 respectively. They were the only two countries besides Japan that sold the R34 GT-T model Skylines new. All Japanese Nissan Prince Store locations that sold the Skyline were renamed Nissan Red Stage.
Frequently Asked Questions
How do I bleed the brakes on a Nissan Skyline R34?
To bleed the brakes on a Nissan Skyline R34, start by locating the brake bleeder valves on each wheel cylinder or caliper. Begin with the wheel furthest from the master cylinder (usually the rear passenger side) and attach a clear plastic hose to the bleeder valve. Submerge the other end of the hose in a container filled with brake fluid. With the help of a partner, slowly depress the brake pedal and have them open the bleeder valve. As the pedal is pushed down, air bubbles and old fluid will be expelled into the container. Repeat this process until clean, bubble-free fluid flows through the hose, then move to the next wheel in the sequence.
How do I change the spark plugs on a Nissan Skyline R34?
To change the spark plugs on a Nissan Skyline R34, start by removing the plastic engine cover to access the ignition coils. Disconnect the electrical connectors and remove the ignition coils to reveal the spark plugs. Use a spark plug socket and a ratchet to carefully unscrew and remove the old spark plugs, then install the new ones, making sure they are properly tightened to avoid any misfires or performance issues.
How do I check the brake fluid level on a Nissan Skyline R34?
To check the brake fluid level on a Nissan Skyline R34, locate the brake fluid reservoir under the hood. The reservoir is typically transparent, allowing you to see the fluid level easily. Ensure that the vehicle is parked on a level surface, remove the cap of the reservoir, and visually inspect the fluid level. The brake fluid level should be between the minimum and maximum marks; if it is low, it may indicate a leak or worn brake pads.
How do I check the transmission fluid on a Nissan Skyline R34?
To check the transmission fluid on a Nissan Skyline R34, first, ensure the vehicle is on a level surface and the engine is warmed up. Locate the transmission fluid dipstick, usually located near the back of the engine bay. Remove the dipstick, wipe it clean, reinsert it fully, and then remove it again to check the fluid level. The fluid level should be between the “Full” and “Low” marks on the dipstick. If needed, add the appropriate transmission fluid through the dipstick tube.
How do I replace a headlight bulb on a Nissan Skyline R34?
To replace a headlight bulb on a Nissan Skyline R34, first, open the hood and locate the back of the headlight assembly. Remove the electrical connector by firmly pulling it straight off the bulb. Next, twist the bulb counterclockwise to unlock it from the assembly and carefully remove it. Insert the new bulb, ensuring it is properly aligned, and twist it clockwise to lock it in place. Finally, reconnect the electrical connector and test the headlight before closing the hood.
How do I replace the battery in a Nissan Skyline R34?
To replace the battery in a Nissan Skyline R34, start by turning off the engine and removing the key from the ignition. Locate the battery, typically positioned in the engine bay. Disconnect the negative (black) cable first by loosening the terminal nut and carefully lifting it off the battery terminal. Then, disconnect the positive (red) cable in the same manner. Remove any battery hold-down brackets and lift the old battery out. Place the new battery in the same position, reconnect the cables, and tighten the terminal nuts securely.
How do I replace the fuel filter on a Nissan Skyline R34?
To replace the fuel filter on a Nissan Skyline R34, first, relieve the pressure in the fuel system by removing the fuel pump fuse or relay and starting the engine until it stalls. Disconnect the negative terminal of the battery for safety. Locate the fuel filter, usually positioned along the fuel line under the vehicle. Carefully remove the fuel lines from the filter using a suitable tool and catch any fuel that spills. Install the new filter, ensuring the flow direction is correct, and reconnect the fuel lines securely. Finally, reinstall the fuel pump fuse or relay and reconnect the battery.
How do I replace the serpentine belt on a Nissan Skyline R34?
To replace the serpentine belt on a Nissan Skyline R34, locate the belt routing diagram on the engine or refer to the vehicle’s owner’s manual. Use a breaker bar or a wrench to rotate the tensioner pulley and release tension on the belt. Slide the old belt off the pulleys, making note of the routing, and then install the new belt following the correct routing. Finally, release the tensioner to apply proper tension to the belt.
How do I replace the thermostat on a Nissan Skyline R34?
To replace the thermostat on a Nissan Skyline R34, start by ensuring the engine is cool and the vehicle is parked on a level surface. Locate the thermostat housing, typically positioned on the engine block. Drain some coolant from the radiator to prevent excessive spillage. Disconnect the hoses attached to the thermostat housing and remove the housing itself. Take note of the orientation of the old thermostat and replace it with the new one, ensuring it is properly seated. Reassemble the components, refill the coolant, and test for proper thermostat
How do I reset the maintenance light on a Nissan Skyline R34?
To reset the maintenance light on a Nissan Skyline R34, turn the ignition switch to the “On” position without starting the engine. Within ten seconds, fully depress and release the accelerator pedal five times. Afterward, turn the ignition switch to the “Off” position. Start the engine, and the maintenance light should be reset. It is essential to follow the specific instructions outlined in your vehicle’s owner’s manual for accurate resetting procedures.
How do I troubleshoot an overheating issue in a Nissan Skyline R34?
If your Nissan Skyline R34 is experiencing overheating issues, there are a few steps you can take to troubleshoot the problem. First, check the coolant level and ensure it is at the appropriate level. Inspect the radiator for any obstructions or damage, such as debris blocking the airflow or a leaking radiator. Additionally, check the operation of the radiator fans and the thermostat. If the issue persists, it is advisable to consult a professional mechanic for a more in-depth diagnosis.
How often should I change the air filter on a Nissan Skyline R34?
It is generally recommended to inspect and replace the air filter on a Nissan Skyline R34 every 12,000 to 15,000 miles or once a year, depending on driving conditions. However, if you frequently drive in dusty or polluted environments, it is advisable to check the air filter more frequently and replace it as needed. A clean air filter ensures proper airflow to the engine, improving fuel efficiency and prolonging the engine’s life.
How often should I replace the cabin air filter on a Nissan Skyline R34?
The cabin air filter on a Nissan Skyline R34 should typically be replaced every 15,000 to 20,000 miles or once a year, depending on driving conditions and air quality. However, if you frequently drive in dusty or polluted areas, it may be necessary to replace the cabin air filter more frequently. A clean cabin air filter ensures better air quality inside the vehicle and prevents the buildup of dust, pollen, and other contaminants.
What is the recommended tire pressure for a Nissan Skyline R34?
The recommended tire pressure for a Nissan Skyline R34 is typically between 32 and 35 PSI (pounds per square inch) for both front and rear tires. However, it is crucial to consult your vehicle’s owner’s manual or the sticker located on the driver’s side door jamb for the exact tire pressure specifications. Proper tire inflation not only enhances handling and fuel efficiency but also helps maintain tire longevity.
What type of oil should I use for a Nissan Skyline R34?
For optimal performance and protection, it is recommended to use a high-quality synthetic oil with the appropriate viscosity, such as 5W-30 or 10W-40, depending on your climate and driving conditions. Synthetic oils offer better resistance to heat and breakdown, providing superior lubrication for the engine components. Always refer to your vehicle’s owner’s manual for the specific oil recommendations.
Nissan Skyline R34 Related Models