
The Nissan Qashqai is a compact crossover being produced from 2007 by Nissan. It is also known as the Nissan Dualis in Japan and Australia. It has a sleek design, being the first to be designed by Nissan Design Europe in the UK. The car is very similar to the Nissan Rogue, sharing the crossover features. Production of a seven-passenger version of the Qashqai, named “Qashqai+2”, began at NMUK in July 2008. Launched in October 2008, it is a larger variant of the standard model with the wheelbase extended by 135 mm. The overall length of the car is extended by 211 mm to allow for a third row of seats, and roof height is increased by 38 mm at the rear.
Frequently Asked Questions
How do I change the brake pads on my Nissan Qashqai+2?
To change the brake pads on your Nissan Qashqai+2, first, remove the wheel to access the brake caliper. Use a suitable tool to compress the caliper piston, then remove the caliper mounting bolts and lift the caliper off the rotor. Replace the old brake pads with new ones, ensuring proper alignment and secure mounting. Before driving, pump the brake pedal a few times to restore optimal brake performance.
How do I change the oil in my Nissan Qashqai+2?
To change the oil in your Nissan Qashqai+2, first locate the oil drain plug underneath the vehicle. Use a wrench to remove the plug and drain the old oil into a container. Once drained, replace the drain plug and fill the engine with the recommended amount and type of new oil, as specified in the vehicle’s repair manual.
How do I check the transmission fluid level in my Nissan Qashqai+2?
To check the transmission fluid level in your Nissan Qashqai+2, start the engine and let it reach normal operating temperature. Locate the transmission dipstick, usually labeled and located near the engine. With the engine running and the vehicle in park, pull out the dipstick, wipe it clean, reinsert it fully, and then pull it out again to read the fluid level. If the level is below the recommended range, add the appropriate type of transmission fluid as specified in the repair manual.
How do I diagnose a check engine light in my Nissan Qashqai+2?
When diagnosing a check engine light in your Nissan Qashqai+2, start by retrieving the trouble codes using an OBD-II scanner. These codes will provide information about the specific issue detected. Research the code descriptions and possible causes in the vehicle’s repair manual or online resources. Based on the information gathered, inspect the relevant components or systems to identify and address the underlying problem. If unsure or unable to resolve the issue, consult a professional mechanic for further assistance.
How do I diagnose a misfiring engine in my Nissan Qashqai+2?
When diagnosing a misfiring engine in your Nissan Qashqai+2, start by checking for any stored trouble codes using an OBD-II scanner. This will help identify the specific cylinder(s) experiencing the misfire. Next, inspect the spark plugs, ignition coils, and spark plug wires for any signs of damage or wear. If necessary, replace any faulty components and test again. Additionally, check for vacuum leaks, fuel delivery issues, or sensor malfunctions that could contribute to the misfire.
How do I replace a cabin air filter in my Nissan Qashqai+2?
To replace the cabin air filter in your Nissan Qashqai+2, locate the filter housing, usually located behind the glove compartment or under the dashboard. Remove the housing cover or access panel, then take out the old filter. Install the new filter in the correct orientation, ensuring it is securely in place. Reassemble the housing and make sure all connections are properly secured before closing the glove compartment or access panel.
How do I replace a fuel filter in my Nissan Qashqai+2?
To replace the fuel filter in your Nissan Qashqai+2, locate the filter housing, usually along the fuel line under the vehicle or inside the engine bay. Relieve the fuel system pressure by either disconnecting the fuel pump fuse or using a fuel pressure gauge. Disconnect the fuel lines from the filter, then remove the old filter from its mounting bracket. Install the new filter, ensuring the flow direction is correct, and reconnect the fuel lines. Finally, restore the fuel system pressure and check for any leaks.
How do I replace a headlight bulb in my Nissan Qashqai+2?
To replace a headlight bulb in your Nissan Qashqai+2, access the bulb socket from behind the headlight assembly. Disconnect the electrical connector and twist the bulb counterclockwise to remove it. Install the new bulb by reversing these steps, ensuring it is securely in place. Be careful not to touch the glass part of the bulb with bare hands, as oils from your skin can shorten the bulb’s lifespan.
How do I replace a serpentine belt in my Nissan Qashqai+2?
To replace the serpentine belt in your Nissan Qashqai+2, locate the belt tensioner pulley and use a suitable tool to relieve tension on the belt. Slide the belt off the pulleys and carefully release the tensioner. Install the new belt by following the correct routing diagram, ensuring it is properly seated on all pulleys. Finally, double-check the belt’s alignment and tension before starting the engine.
How do I reset the maintenance light on my Nissan Qashqai+2?
To reset the maintenance light on your Nissan Qashqai+2, turn the ignition switch to the “on” position without starting the engine. Within 10 seconds, fully press and release the accelerator pedal five times. Wait for the maintenance light to start blinking, indicating that the reset is complete. Cycle the ignition off and then start the engine to confirm the maintenance light is no longer illuminated.
How do I troubleshoot an electrical issue in my Nissan Qashqai+2?
When troubleshooting an electrical issue in your Nissan Qashqai+2, start by checking the fuses related to the affected circuit. Use a multimeter to test for continuity and replace any blown fuses. If the issue persists, inspect the wiring and connectors for any signs of damage or loose connections. Additionally, check the battery terminals for corrosion and ensure they are tightly secured. If unable to identify the problem, consult the vehicle’s repair manual for further guidance.
How often should I replace the engine air filter in my Nissan Qashqai+2?
It is generally recommended to replace the engine air filter in your Nissan Qashqai+2 every 15,000 to 30,000 miles, or as specified in the vehicle’s repair manual. However, factors such as driving conditions, air quality, and filter type can affect the replacement interval. Regularly inspect the air filter, and if it appears dirty or clogged, replace it to ensure optimal engine performance and fuel efficiency.
What is the recommended tire pressure for my Nissan Qashqai+2?
The recommended tire pressure for your Nissan Qashqai+2 can be found in the vehicle’s owner’s manual or on a sticker located on the driver’s side door jamb. It is important to maintain the recommended tire pressure for optimal handling, fuel efficiency, and tire longevity. Regularly check and adjust the tire pressure, usually when the tires are cold, to ensure they are properly inflated.
What should I do if my Nissan Qashqai+2’s battery is dead?
If your Nissan Qashqai+2’s battery is dead, you can jump-start the vehicle using jumper cables and another vehicle with a charged battery. Connect the positive cable to the positive terminals of both batteries, then connect the negative cable to the negative terminal of the charged battery and a grounded metal surface on your Nissan Qashqai+2. Start the working vehicle and let it run for a few minutes, then attempt to start your vehicle. If successful, let your Nissan Qashqai+2 run for a while to recharge the battery.
What type of coolant should I use in my Nissan Qashqai+2?
It is recommended to use a coolant that meets the specifications outlined in the Nissan Qashqai+2 repair manual. Typically, a mixture of ethylene glycol-based coolant and distilled water in a 50:50 ratio is suitable for most vehicles. However, always refer to the specific coolant recommendations in the manual to ensure compatibility and optimal performance.

Nissan Qashqai+2 Related Models