The Nissan Stagea commonly referred to as the Skyline wagon (because it shares many mechanical parts as the R33 Nissan Skyline and Nissan Laurel) is a station wagon originally produced by Nissan in 1996 as direct competition for the Subaru Legacy Touring wagon in Japan, and it was exclusive to Nissan Prince Store Japanese dealerships.There are 3 different versions of the Stagea, WC34 Series 1 (1996 to late 1998), WC34 Series 2 (late 1998 to 2001) and the M35 Series (2001 to 2007). The Stagea was available with a 2.0L single cam, a 2.5L twin cam n/a, a 2.5L twin cam turbo or 2.6L twin cam, twin turbo engine. All engines were from the RB range, with the 2.6L (260RS model) being the same as that equipped in the Nissan R33 GTR. Engine power ranged from 114 kW (153 hp) in the 2.0l to 172 kW (231 hp) in the 2.5l turbo and 206 kW (276 hp) in the 2.6L twin turbo.The Stagea was available in 2WD (RWD) and AWD variants, with the RWD variants using RWD Laurel front suspension (strut type) and AWD versions using RWD r34 Skyline (multiple link) front suspension. Both RWD and AWD shared its chassis platform with the C35 Laurel, which had the same wheelbase of 2720mm, and was also available in RWD and AWD. The chassis between 2WD and AWD did have some differences, the main being the drivers side chassis rail on the AWD version being positioned closer to the lower sill. This was done to make room for the transfer case located on the end of the AWD transmission.
Frequently Asked Questions
How do I bleed the brakes on my Nissan Stagea?
To bleed the brakes on a Nissan Stagea, start with the furthest brake caliper from the master cylinder. Attach a clear plastic tube to the brake bleeder valve and submerge the other end in a container of brake fluid. Have an assistant press the brake pedal several times and hold it down. Open the bleeder valve briefly to release the air and fluid, then close it. Repeat this process until all air bubbles are eliminated from the brake system, starting with the furthest caliper and working your way to the closest one.
How do I change the air filter on my Nissan Stagea?
To change the air filter on a Nissan Stagea, locate the air filter housing, usually positioned near the engine intake. Remove the housing cover or clips, exposing the air filter element. Take out the old filter and inspect the housing for any debris or dirt. Install the new air filter, ensuring proper orientation, and reassemble the housing. Regular air filter replacements promote better engine performance and fuel efficiency.
How do I check the engine coolant level on my Nissan Stagea?
To check the engine coolant level on a Nissan Stagea, start with a cold engine. Locate the coolant reservoir, typically a translucent plastic container near the radiator. The coolant level should be between the “MIN” and “MAX” marks on the reservoir. If the level is low, add the recommended coolant mixture to the specified level. Always consult the automative repair manual for detailed instructions and safety precautions.
How do I perform a wheel alignment on my Nissan Stagea?
Performing a wheel alignment on a Nissan Stagea requires specialized equipment and professional expertise. It is recommended to take your vehicle to a reputable automotive service center or a certified technician for a precise wheel alignment. They will use computerized alignment machines to adjust the suspension components, ensuring proper wheel angles, tire wear, and overall vehicle stability.
How do I replace a burnt-out headlight bulb on my Nissan Stagea?
To replace a burnt-out headlight bulb on a Nissan Stagea, open the hood and locate the rear of the headlight assembly. Disconnect the electrical connector and remove the retaining clips or screws holding the bulb in place. Carefully remove the old bulb and insert the new one, ensuring it is properly seated. Reattach the retaining clips or screws, reconnect the electrical connector, and test the new bulb.
How do I replace a faulty alternator on my Nissan Stagea?
To replace a faulty alternator on a Nissan Stagea, start by disconnecting the negative battery cable and removing any necessary components obstructing access to the alternator. Disconnect the electrical connectors and loosen the bolts securing the alternator in place. Gently remove the old alternator and install the new one, ensuring proper alignment and connections. Reassemble the components and reconnect the battery cable, then test the charging system to confirm proper operation.
How do I replace a faulty ignition coil on my Nissan Stagea?
To replace a faulty ignition coil on a Nissan Stagea, start by locating the coil pack, usually mounted on the engine’s cylinder head. Remove the electrical connectors and retaining bolts holding the coil pack in place. Gently pull out the old coil pack and insert the new one, ensuring a proper fit. Reattach the electrical connectors and bolts, and perform a thorough ignition system test.
How do I replace the brake pads on my Nissan Stagea?
To replace the brake pads on a Nissan Stagea, start by safely lifting the vehicle and removing the wheels. Then, locate the brake caliper and remove the retaining clips or bolts. Slide out the old brake pads, clean the caliper and rotor surfaces, and install the new brake pads. Finally, reassemble the caliper, reinstall the wheels, and perform a thorough brake system inspection.
How do I replace the cabin air filter on my Nissan Stagea?
To replace the cabin air filter on a Nissan Stagea, locate the filter housing, usually located behind the glove compartment or under the dashboard. Remove the cover or access panel and take out the old filter. Inspect the housing for any debris or dirt and clean if necessary. Install the new cabin air filter, ensuring it is properly seated, and reassemble the housing and access panel.
How do I reset the maintenance light on my Nissan Stagea?
To reset the maintenance light on a Nissan Stagea, turn the ignition key to the “ON” position without starting the engine. Fully depress and release the accelerator pedal five times within five seconds. The maintenance light should start flashing, indicating that the reset is complete. If the light remains illuminated, refer to the automative repair manual for further troubleshooting steps.
How do I troubleshoot an electrical issue in my Nissan Stagea?
When troubleshooting an electrical issue in a Nissan Stagea, it is essential to have a multimeter, wiring diagram, and the automative repair manual on hand. Start by checking the fuses, relays, and battery connections for any signs of damage or loose connections. Proceed with testing the circuits and components using the multimeter, following the repair manual’s step-by-step instructions. If the issue persists, consult a professional technician or refer to the automative repair manual for further troubleshooting guidance.
How often should I change the engine oil on my Nissan Stagea?
The engine oil in a Nissan Stagea should typically be changed every 5,000 to 7,500 miles or every 6 months, whichever comes first. Regular oil changes are important to maintain engine performance and longevity. Refer to the automative repair manual for specific recommendations based on your vehicle’s model and year.
What is the recommended tire pressure for my Nissan Stagea?
The recommended tire pressure for a Nissan Stagea can vary depending on the specific model and tire size. It is best to refer to the automative repair manual or the placard located on the driver’s side door jamb for the correct tire pressure specifications. Proper tire inflation is essential for optimal handling, fuel efficiency, and tire longevity.
What type of coolant should I use in my Nissan Stagea?
It is recommended to use Nissan Long Life Antifreeze/Coolant or an equivalent high-quality ethylene glycol-based coolant for your Nissan Stagea. This coolant provides optimal protection against freezing, boiling, and corrosion. Always refer to the automative repair manual for the correct coolant specifications and proper mixing ratios.
What type of transmission fluid should I use in my Nissan Stagea?
The type of transmission fluid recommended for a Nissan Stagea can vary depending on the transmission type and model year. It is crucial to consult the automative repair manual for the correct fluid specification and proper filling procedure. Using the wrong transmission fluid can lead to poor shifting performance and potential damage to the transmission.